I have no sound on the computer, the cd will not play. It says my driver is not working, have tried everything to fix it. __can someone help

Similar Questions

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• My setup of the printer will not work and Fire fox shows only blank pages. Help?

  I tried to change the margins on my printer set up. Since I did my printer will only print blank pages of Firefox. (If I open a PDF file it prints well) I tried to go back into all of the printing, but it is only as a large black page. Any thoughts?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• Hi everyone, I have a downloaded version of Lightroom 5 (not the online version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Hi everyone, I have a downloaded version of Lightroom 5 (not the web-based version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Help is appreciated.

  Have a great day,

  Omar

  Hi Omar,.

  Could if it you please let me know are you not capable of working in the develop Module?

  Or is the Panel on the right in gray?

  Also could you please attach a screenshot.

  Kind regards

  Tanuj

• I have tried everything to fix the Code 16 error help!

  I have tried everything to fix the Code 16 error help!

  Hi leolion,

  You may wish to consult the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  Kind regards

  Rave

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• Try to do a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  Original title: how to change system locale

  So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• have sound but the microphone will not register

  laptop G60-235DX

  Sound and built into the microphone the microphone does not work

  Hi mrgw11,

  I understand that you have a problem with the microphone not working not properly. I was able to locate a specific document on Windows Vista. I understand that the document here> for you.

  If the document is not correct for the operating system you are using, please let me know what specific operating system you run here>, so I can help you.

  Please let me know how it works for you.

• USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

  In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?

  Hello

  There could be a hardware problem that just happened to come while he was on the system.

  Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
  If there is another USB settings and check with system manufacturers.

  Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
  keep the data.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Several options below.

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.

• The cutting tool will not work in trying to capture the menu drop-down

  I've recently upgraded to Office 2016 from 2013 and since then my Snipping Tool will not work correctly. I can always capture what I want except for the drop down menus. Eight other users are connected to my network of the company; all Windows 7, all Office 2016 and it works on all the computer but mine. I opened the Snipping Tool, click Cancel (tried to escape, too), and then open the menu drop down, press Ctrl + print screen and nothing happens. Can someone help me?

  I just thought of it myself. Used to work in previous versions using the Esc, then press Ctrl + print screen. Now, it's a little different.

  1. Your screen are preparing to capture you want, with the exception of the drop down.
  2. Open the capture tool and choose the type of capture you want (I use the Rectangle) and now the new part... Choose a delay for however many seconds you have to when you press New when you can open the drop desired down.
  3. Click new. (The capture tool will activate not to but the number of seconds you have chosen late.)
  4. Open your drop desired down and wait for the tool.
  5. Proceed as usual.

  Hope that helps!

• Pavilion E017DX: Keyboard Pavilion E017DX will not automatically detaches the Instructions in the manual will not work

  (It is not relevant to OS)

  I have very very alert followed the instructions in the manual 'for laptop HP Pavilion 17"downloaded from the HP website.

  There was no ambiguity on the two screws to remove to release the keyboard.

  However, after releasing their (and, of course, carefully following all prior instructions as well), the keyboard will not loosen, it remains as tight as a tick and is not even remotely let go.    All that happens when I "insert a thin tool into the output port of the keyboard and press the back of the keyboard" as indicated in the manual is that the "." key (period) comes off!

  There is also a hole size of finger under the WLAN (not mentioned in the manual) that is labeled clearly communicated keyboard (engraved on the metal).    Pushing hit as firmly as possible without risk of breaking the computer accomplishes absolutely nothing.    The keyboard still not loosen.

  Something seriously missing in the instructions and/or the design of this computer is seriously insufficient.   My next computer will not be a HP.

  PS: I got a lot of experience in the repair of laptops of all kinds.  Lack of familiarity with the technology of the laptop is not the problem remotely.

  Usually, you will have to lift the loose keyboard around the edges while pushing from the rear. I hope that this video will help: Remove keyboard

  If you found my answer helpful please say thank you by clicking on the icon cursor.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!

• On top of any web page, the hotspots will not work. It seems that the links in the part of the header of a page are disabled.

  On any web page (Facebook, Yahoo, this page), the links at the top of the page do not work. Hot spots seem dead. To this page of computer desktop/laptop/Firefox home links will not work.

  The Yahoo toolbar causing declared. Disable or uninstall.

• Windows VISTA BIT missing Modules! Updates to the installer will not work.

  MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

  Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

  Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

  Thank you, DRC

  Hi DCassie,

  1. Have you tried the 940520 full KB?

  If you have not completed the Ko 940520 try the full article and check if it works.

  If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.