I have NO way to type in the site, of that I'm looking. What has happened in the field "address".

Similar Questions

• Can't see the network PC MAC computer, unless I have use RUN in the start menu and type in the IP address.

  Original title: MAC to PC NETWORKING.

  I added my Mac to my PC network workgroup.  I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.

  Hi markymo777,

  I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.

  Hope the helps of information.
  Please post back and we do know.

• The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  Hi kdwis,

  Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.

  Hope this helps!

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• Value of the field address in Debug portal

  I'm new to push the technology,

  I have download the sdk to push successfully for the blackberry and install site it now I want to push the message from the portal-debug in the management of debugging-gate push---> push-->

  I'm not able to find whose address is given in the field address given in the form.

  I get the following error:

  2002:

  For the address was not in a

  recognized or is invalid or unknown format (IE not a subscriber).

  I do not know what id push I gave during the push.

  I give id as 5.

  but do not know what value I give in the address field

  due to above error I am not able to generate push of the portal pushid null value is given

  Push id must be a globally unique value - anything in the world at random.

  The address must be the id of the Subscriber/user name that you registered with the device.

• Ridiculous... unable to perform acorobat drive after having tried to update, following the instructions to uninstall, change browsers, etc. etc. Spent all morning and still can not installed so I have no way to open all the previous documents acrobat!

  I did everything that was asked to update my acrobat reader, who showed on my computer. When I couldn't do in a first time, I followed the instructions, save it to run first to change browsers, etc. etc. I uninstalled my control panel of my acrobat reader program and NOW I can't open any pdf course or install little matter what I do, and how many times I repeat and change according to their instructions. I'm more than embarrassed because I spent the last 4 hours trying to install it and update or reinstall, etc, etc and I have it in my past as a career. It's a known issue, bug, of course, if someone needs to contact me to Adobe and let me know what they will do about it.

  Please help because I know what is happening in the world and I know that Adobe must have a solution outside everything what they propose that do not work.

  Thank you to all those who have different ideas of what is happening on the websites of ADOBE

  Hello

  Please uninstall the software Adobe Reader using the tool from the link below.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then install the reader by the Setup program using the link: http://get.adobe.com/reader/enterprise/

  Thank you

  Abhishek

• After 40.0.2 updated, type in the web address obscured w / partial spacial blocks

  If you type the characters of a product of web address blocked visibility of what is typed with a single block by letter - more typed letters most blocking looks like an etch-a-sketch damaged block that changes reduced size/shape. Once all of the characters in the web address are typed, the characters become readable/visible. Strange problem! Anyone know what it is or how to fix?

  just for your info: this issue could "solve" itself now in the next few hours, as mozilla puts the affected drivers on a red list now, so they can cause is no longer the problem.

• I'm figuring (add) a column on a PDF form and on the calculation tab, it doesn't let me select (check) the fields I want to calucalate.  It won't let me type in the fields of the box either.

  I'm figuring the shape (add) a column (sum) on a pdf file and on the calculation tab, it won't let me select (check) the fields I want to use in the calculation.  It won't let me type fields in the box either.  I'm doing something wrong?

  the mouse click on the name of the field and press the space key

• How to access a keypad to type in the email address, etc. in trying to put in place applications

  I am trying to activate (eprint) APPS for my new HP 6600 1.  You will need to enter the email address, password, etc. to use applications such as Google Docs., scanning reception, ebox.  Everything is all ready to enter on the screen of the printer, but no keyboard appears.  The implementation seems complete and correct, and I can immediately print items such as easy forms (HP), but do not need to add email, password, etc. to use.

  I use VISTA: IE9 and Firefox (latest issue) are my browsers.  Thank you.

  PS There is no error message: I can't simply complete the task without a keyboard characgter.

  I'm sorry that I understand your question now.  In order to get the keyboard for all what you need to bring is your finger in the area to be filled once the slider rises the keyboard should appear automatically.

• Hey, I have a VHD file on my D drive which takes place 188Gbs. What will happen if I removed it?

  All of a sudden, I get a notification that there is little or no space on my hard drive (D) and I have nothing installed on this computer in a very long time.  Under the image of the file system is where is this VHD file and it is 188Gbs.  Someone told me exactly what it is (technically), but I don't really understand.  They also said that it is an outrageous amount of space for a virtual hard disk to meet.  Can I delete it?

  Drive hard virtual is a virtual disk and is normally generated by a program like Virtual PC virtualization, VMWare etc. They allow you another PC as a program on your primary PC.

  When a virtual PC is set up you need to create a single file that contains all the files on a PC. However, even if you can drive to be similar in size to a real PC for more real space is much smaller. Normally, when you set up a virtual drive you can set at 100 GB, but you normally specify the actual file to only be as big as the information contained in this.

  Regarding can remove you, if you have no idea where it came from probably yes. However to be sure, it is possible to mount a virtual hard disk as if it were another drive in your computer. In this way, you can check and see what are the contents.

  Right-click on computer and select manage.

  Click on disk management and wait for the load utility.

  After that that it has loaded right click on disk management and Attach VHD. Navigate to the location of the file and select it.

  Now, in computer, you must have an additional drive which is the VHD file. Navigate to the bottom and see if you can work it out where it came from.

  Following the same sequence, you can also create a VHD, the default values that are fixed size and all the free space on the disk, sounds a bit like what you have.

• What has happened to the "locking" of the sites web none?

  I used to get the "lock" icon at the bottom right of my window indicating a secure site to make purchases. It is!

  It was replaced by the site identity button, for more details on use, see the How do I know if my connection to a Web site is secure? article.

  If you prefer to have a lock, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• I can't type in the web address in the address bar. I have to open a new tab to do.

  I just upgraded from Windows XP to Windows 7. I reinstalled firefox, added the shortcode that I liked so much and then tried to use firefox. I can not type the URL in the address bar when I start firefox. I always have to open a new tab before it let you me. I can't highlight and copy what is typed here - also, AND I can't "paste and go" more. That open disappeared?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Would be useful to have a way to tell if the addons are compatible before installing an update. Lightning is the main concern for us.

  Thunderbird updated to 24.5.0 but I need to know with certainty that the Lightning has a compatible version before doing the update. Cannot afford to lose this calendar. When I look at the mozilla lightning site, it shows the current version, the one I use, is compatible with my current Thunderbird 24.4.0,. But the site of lightning indicates the 24-compatible version of lightning has not yet been published. Yes, is this to say that if I update Thunderbird 24.5.0 then the current version of the lightning will not properly work or not at all?

  I would like to see an option in the dialog to update Thunderbird that shows me each of my addons, which will be compatible with the new version of Thunderbird, and will not, then I would select update or wait.

  Thank you.

  Lightning will continue to work with TB 24.5.0.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

  Search for 'Version information' at the bottom of the page.

  A corresponding version of Lightning will be available with each major release of Thunderbird. This will be 31 TB sometime later this year.

• "UDP receiver.vi" does not work on the type of "public" network but on a private type and the field. Why so much?

  I have a configuration Ethernet with 'UDP sender.vi' and "UDP receiver.vi" basically back in as the eponymous example shipped in LabVIEW examples i.e. pair. Nothing special and quite basic.

  The UDP sender regularly sends out UDP (30 bytes) packets to the receiver using the number of receivers IP and port 80. However, the port number is not interest to the problem.

  The sender and the receiver are different machines, but the two LabVIEW 2011sp1/32, Win7/64
  If it is running on a domain network, it works very well. If it runs on a 'public' (Windows Firewall terminology) using the network - IP number data comes through in the Receiver.vi 'UDP '!

  I checked what is obvious:

  1. The packets arrive actually in the network interface (checked with Wireshark) UDP receiver computers. For example. Connection via the sender's public network and firewall it meets on his way there.
  2. firewall on the receiver PC is open for incoming traffic on port 80 for the public (and private + domain name) and open for all programs and allowing the crossing side (there is a router with NAT translation upstream). We even tried to disable the firewall completely - no change.
  3. A program with a similar function as ' UDP Receiver.vi ' but written in C++ running in the same exact state, works as expected.
  4. same "UDP Receiver.vi" running on a target RT (sbRIO9606 or cRIO9024) and off the coast of the exact same cables copper - works as expected.
  5. It is tested on several PCs with the same results.

     For example. everything is, as far as I can see, according to the 'books', and again, I must have missed at least one book. The data arrives in the PC network stack - otherwise the program c ++ would work either. So what is done differently in LabVIEW?

  Any suggestions as to why a C++ program or a RIO can read the 'public' port UDP, but such a LabVIEW program cannot? And especially what can be done to solve it.

  Thank you
  Henning

  There are many other services that is blocked by nature in Windows when you use a network connection of type 'Public '.  Have you added an exclusion for LabVIEW so LabVIEW is not blocked when using a network of type "Public"?

• Element not falling is not in the form of LOV Type Absence, the field of 'Associated Element '.

  I'm not able to get my items in the list of values 'Associated Element' as a type lack. I made the following adjustments, please correct if Miss me something
  1. the item created is non-recurring item.
  2. Pavilion of payroll process uncontrolled (I also tried with verified but I did not work)
  3. I have created a link for the item.
  4. I try to combine this element with the type of absence but I am unable to get it in 'Associated Element LOV'
  
  Please answer.

  Check the item days / hours entry value with the corresponding MEASUREMENT unit which corresponds to units of Type Absence.