I have pale green vertical lines on my iMac 27 "

Similar Questions

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Green vertical line on monitor on Satellite A80

  I have a SA 80 127. Is it 1.5 years.
  Recently, a bright green vertical line appears on my monitor; Looks like a LCD issue.
  Does anyone have clues that I have to do?
  Thank you...

  Best
  knockaert

  To be 100% sure test with external monitor. If this line is displayed on LCD only you should contact the service in your country. If the display is faulty, it should be replaced.
  The warranty is still valid?

• When I open computer on my desk about 70mm from the right side, there is a thin green vertical line

  Toshiba Satellite laptop computer, and when I open computer there is a thin green vertical line on my desk about 70mm from the right side. Is it possible that I can eliminate this myslf with your help or I will have to consider a locally recognized it professional?

  Please notify.

  Considers that Vicki.

  PS., appears not to hinder the performance of the computer. Computer is about 7 years old and running Windows Home.

  That looks like it's simply damage to the monitor.

• Green vertical line on screen - Satellite P30 Pro

  A single thin green vertical line appeared about a sixth of the way across the screen. It works up and down continuously and immediately displays the screen is activated.

  I presume that this indicates a hardware failure - can anyone confirm please? Guess I'm interested in large bills?

  Hi Ian

  How is - someone must provide an exactly fault diagnosis without putting the hand on this laptop?
  Here, we can suggest and discuss only!

  If she really looks like a hardware problem, but the question is; What s wrong.
  In my opinion, you must connect the external monitor to the laptop. Check if the same vertical line appears on the second screen!

  If Yes, then the chances are high that the graphics card is broken! This could be a case value because the GPU is soldered on the Board and the entire motherboard must be replaced to solve this problem.

  Concerning

• Green vertical lines then white screen on Qosmio F10

  My Toshiba Qosmio F10 primer is more. When it is on, the windows logo appears and the screen green vertical lines before going completely blank. The screen remains blank for about 5 minutes, then the laptop starts to restart. It justs goes on and so forth.
  No one knows what the problem is and now the laptop is out of warranty, cost for repair, or it is not profitable and it would be cheaper to buy a new laptop?
  Thank you
  Mike.

  Hey Buddy,

  Unfortunately ' unfortunately it seems that this defect is caused by component defective equipment.» It could be that the motherboard together that cost to a service center about 400 European must be replaced. (New card mother and Exchange)
  You can also try to clean your cooling system with a can of compressed air to remove dust which could probably cause the error, also.

  If you really want to give your machine for repair, then follow this link and find nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Green vertical lines / tracks audio FX of detachment and the music of the video clip

  iMovie 10.1 on El Capitan

  This isn't a simple modification / detach Audio edition.  Is delete an image only without deleting the other independent music and audio tracks FX built under it (not worth original audio with the image).

  I built FX and music tracks on a video that has many Visual changes (with some images just by music).  Now, I want to change a few images, but when I cut the video image, some FX and music under it also disappears (tracks built under the image, not shot with it).

  It seems that green vertical lines under the picture (in the time line) are tying in various capacities, although these FX and music tracks run far beyond the video image and were not turned with the video image.

  How can I remove those green vertical lines and detach these multiple audio tracks of the image I want to cut?  Thank you.

  Yes, if you delete a video file or even attached with audio clip, the audio will be deleted also.  You must move the anchor (green line) to an adjacent element.  To do this hold command and alt (option) key down and click on in the half superior audio clip (or in the clip of Cup or title) where you want the connection be moved on.

  (If there is no synchronization issues you can simply change the audio if it is related to another clip, and then quarterback after the change of the image.)

  Geoff.

• I have a blue vertical lines on my screen

  my screen has vertical lines displayed

  Hello

  Monitor or a computer might have hardware problems.

  Check the video cables at both ends - monitor and the computer.

  Remove ALL power and reinstall all the memory cards and cables (at both ends, where this is possible)-in fact
  Remove and reinstall - no not just tight. Clean the dust bunnies and make sure that the vents are clear.
  Make sure you fans work when you put it back together.

  See Safe Mode to see if the same thing happens - repeatedly press F8 that you start.

  If any help try the monitor on another computer and another monitor on this computer to see if you
  can determine who has the problem.

  You may need to communicate with the monitor or support the system Maker (or video if another card manufacturer
  (device) once you determine who has the problem.

  ================================================================

  "Perhaps," it's a driver issue (which is doubtful). (Use Mode safe if you need.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a white vertical line down the right side of my screen

  Hi all

  Can someone help please.
  I noticed a day or two there is a white vertical line appear on my screen.  Have you checked the updates etc, but nothing seems to have fixed.
  Can someone please help :-)

  Hi Vicky,

  I apologize for the late response.

  If you still experience the problem, I suggest you to contact the manufacturer of the monitor that has the problem and check if it is a hardware problem in the monitor.

  This is because, in Safe Mode, the graphics drivers do not work on your computer. Because you have encountered the problem in Mode safe as well, it indicates that the problem is not caused by a problem in the software that controls the attributes of your display unit. So, at this point, it would be better if we check for hardware issues in the monitor. We do not have enough expertise to help you to diagnose hardware problems, but the hardware manufacturer specialize in this.

  I hope that this information will take a step more toward the resolution of the issue. If you have additional questions about Windows, do not respond. We are happy to be of assistance.

• Green vertical line on E1914H

  A vertical green line (width in pixels) suddenly appeared on the screen. It is present with or without input from a computer. The monitor is around the age of three months. What is the next step? I tried to find some info contact with dell, but not luck.

  If the problem appears during self-test and built-in Diagnostics (pages 49-50), it is defective.
  * Back to the top of this Forum to monitor
  * Open, "My 24" or more small monitor does not have a Service tag? »

• Green vertical line on screen

  A green line is constantly through my screen, my operating system is windows vista

  I know that this is a technical foul because when you run the mouse over the pointer is in the front of the line so that it rules on a damaged screen
  Help, please

  Hi André,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  This issue could be the settings with the monitor or screen discs has been corrupted.

  I suggest to start the computer in safe mode and check if the problem persists.

  In safe mode will have reduced functionality, but the task of isolating problems is easier because many non-core components are disabled readers even display.

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  If the problem does not persist in safe mode, and then perform a clean boot in order to check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  See the following Microsoft article:

  How to solve the problem by running the clean boot in Windows: http://support.microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you are able to boot into normal mode, with success, then I suggest you download and install the latest driver for the display driver.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Green vertical line on the laptop screen

  Hello

  Certain someone could help me please with how can I fix a vertical green line on the right side of my laptop screen.

  Thank you

  Hello

  If a separate monitor (not a laptop), it will be setting of physical geometry on it then you can move all the
  the screen to the right and enlarge if necessary. Also right click an empty area of the desktop - graphic properties.
  Search for geometry settings (PCs and laptops).

  If necessary contact your system support manufacturer and check their documents and online forums. Do
  even to the different system manufacturer monitor manufacturer if.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• have funny blue vertical lines on laptop screen

  HP laptop pavilion dv7 - 1273cl.  Win7 32-bit upgrade.  jmcr pilot of gradient.  don't have an improved win7 1 year there in vain.  CSUC (computer store of the chico State University) recovered bones and made a successful upgrade.  problem improved slightly when removed memory modules and cleaned inside the laptop to compressed air. the only thing that I found in troubleshooting os was pilot of jmcr was listed as degraded. where can I find this driver because it is a jmicron card reader and I hope that this will solve the problem.

  All your drivers for 32 bit Windows 7 are displayed, including the card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3860658#N493

• vertical line on my screen.

  I have a pale green vertical line that stays on my screen. How can I get rid of him?

  Hello

  If you have the means, attach another monitor. If the problem persists, the cause is the video card. If this isn't the case, you will need to replace the monitor.

  If it is the video card, update the drivers can help. It can also be caused by the card not sitting correctly in the slot of the motherboard, and can help to resettlement. You will find that you need to replace the card.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP 6510 a thin line on LCD screen green vertical

  Hi, anyone able to help a fault on my printer HP 6510?  A thin green vertical line (about 1 pixel wide) just appear to the right of the LCD (about 5mm from the end of the affair).

  Have you tried turning on and off the POWER, unplug the printer from my PC etc but the problem persists.

  Thanks in advance for any help,

  ShuttleMan

  I'm afraid there is a problem with the LCD screen or electronics, the LCD screen at the wheel.  You will need to Contact HP for service.  You can check the warranty of your printer here if you no longer have the receipt.