I have Photoshop CS4 and I need to reinstall CD after a computer crash and reinstall Windows 7, but it will not be reinstalled I think because he used to completely uninstall. Can anyone help?
I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.
This could be to uninstall because it used entirely from the control panel of Windows 7. Can anyone help?
Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool. Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.
Adobe Creative Suite cleanup tool
helps resolve installation for CS3 thru CS6 and creative cloud problems
http://www.Adobe.com/support/contact/cscleanertool.html
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Tags: Adobe
Similar Questions
-
I need to install Adobe acrobat 8.1 standard on another computer that my old crashed and is no longer useabel. I have the disc and the serial number, but it will not activate. ?
Hello
If you are using windows, you might see the following link for download Acrobat 8 and then see if you are able to activate it.
Download Adobe Acrobat products. 9, 8
Concerning
Sukrit diallo
-
It doesn't sound like the printer may have lost its Wi - Fi connection. Go to the options of setting up wireless on the front of the printer and run a wireless test report. Wireless test report will tell you whether or not the printer is connected to the network. If it is not on the network, run trough the document following the link reconnect the printer and get it stable on the network. Let me know what happens.
-
I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.
Hijimm
Please make sure that you have the correct version of Camera raw installed and that you use a camera supported supported by Camera Raw devices check the raw version of camera you have help > on Photoshop(Photoshop>>About Photoshop on MAC)
Check by using Updates.Select > updates (from bar of menus in Photoshop)
Or manually install here Adobe - Photoshop: for Macintosh: Adobe Photoshop CS4 11.0.2 update - multiple languages
Adobe - Photoshop: For Windows: Adobe Photoshop CS4 11.0.2 update - multiple languages
You can check this thread for the other Possible solution
Also move this thread of Discussion General bridge in Photoshop General Discussion
Concerning
~ Assani
-
I have photoshop CS5 and CS6 for PC, but now I bought a Mac Book Pro. Can I change the key license or do I have to buy the MAC version?
Please click on this link http://helpx.adobe.com/contact.html?product=creative-suite&topic=orders-refunds-and-exchan GHG and click on I still need help > Chat now.
Make a cat and provide the file number, they will help you more.
Kind regards
Aurélie hamadi
-
Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please
Try to resave the EPS to the native .ai or .psd format (depending on whether it's raster or vector) and use it.
-
I'm having a problem of publishing in muse. I get this message: an unknown authentication error occurred to you using adobe ID (shared_uknown_error). can anyone help? Thank you
Hello
As we found during the chat session, your creative application Cloud wasn't so far because of what server Muse and British Colombia were not getting synchronized.
Concerning
Vivek
-
I have DW CS4 and want to update but don't want a monthly fee for CC. What are my options?
There is no way to upgrade to CS4 versions.
If you do not want to join the Cloud then your only remaining option is to buy a new version full DW cs6.
Just remember that CS6 is replaced software 3 year that isn't old is no longer being updated.
-
My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help
When you ask a question you will need to provide some basic information
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Lost information - response #1 in https://forums.adobe.com/thread/2008767
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
I just bought Adobe Acrobat Pro DC, and I can not find the 24-digit serial number. I can only find 2 codes to 19 different figures, but it will not accept them in the redemption of the student? Where can I find the code?
Hi dobbynation,
Please see this KB doc for help: redemption code help
Let us know if you need help.
Kind regards.
Meenakshi
-
Hello.. I bought photoshop cc, but it will not be installed. So I want to know how I can get solution.
He came like that.
-
Original title: printing problems
I am facing a problem with the printer - or maybe a computer problem. I can't pinpoint the problem. My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed. My documents will in Quebec, but after about 30 seconds, the State spends printing, error. I've tried everything. (Occasionally), it will display a test page. Any ideas?
Hi Julia,
Thanks for posting the question in the Microsoft Community!
You are unable to print and get the error message.
I imagine the frustration you feel when you are unable to print.
This can happen due to connection problems, malicious content or third-party programs.
1 have you tried all the Troubleshooting steps?
2 is the computer, or a printer attached to a domain network?
3. are you able to print from Notepad?
4. what documents do you speak?
5 is the full error message?
To check if it's because of connection problems malware content follow the steps mentioned below:
Method 1: Run the troubleshooter
See the site:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
Method 2: Scan the computer to remove all possible malicious content
See the site:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx .
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 3: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the site:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135 .
Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.
Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?
Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html
Let me know if it works!
-
I've recently updated to Apple El Captain since my Photoshop CS4 (version 11.0.2) is not printing. I checked and the printer works fine other applications (preview, Nikon NX2 etc.). Can anyone help?
This post is useful and I can print now.
4 re: Photoshop printing with a new interface of Epson
Printer_Rick , August 4, 2009 07:11 (in response to JoeLunetto)
This message by Miguel may or may not be useful:
http://forums.Adobe.com/message/2096662#2096662
It is my understanding that when printing in Photoshop, with "Proof", selected in color management and "Photoshop manages color" under color management, Photoshop performs color conversions on output 2.
The first is the "Proof" profile (which purposes commercial impression, describes the State of the press), based on the color settings. Then it is in turn converted to RGB ink jet printer profile.
With this final conversion, it changes depending on the format of test (paper, ink, black) options in the dialog box print in Photoshop. If none is selected, Relative, active PCBS Colorimetry. If the black ink is checked, Colorimetry Relative, disabled PCBS. If the color of the paper is checked, absolute Colorimetry.
Maybe these correlations are known, but they were certainly new to me. What this means is, if you have a lot of trouble with printing interface, you could do the necessary conversions manually and send RGB not calibrated to the printer. Not an efficient workflow but will work if you are in a bind.
-
Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?
I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.
Did you download and install the special version of CS2? It's the only one, you will be able to use.
Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
Maybe you are looking for
-
I get a box to popup asking to upgrade to ver 33.0 what is current worm?
running WXP, FireFox 32.0.3, everything seems fine. Sometimes an applet opens asking implementing updated level of worm 33.0.0. I suspect that this is a hack and never commit but close. When I opened the box of remarks he said that I'm up-to-date wit
-
Research Spotlight shows no results
on the iPhone 6 more, after I upgraded to iOS9, projector comes in white, whereas previously it worked perfectly. I tried tried various solutions such as hide/show contacts, turn off all spotlight results, hard reset, but in vain. Apple, difficulty o
-
Stop switch 10 and use the problem
Hello I have an Acer Switch 10 Tablet and for some time, it has had problems When the browser (chrome or opera) is opened it would at some point become insensitive With that the W8.1 would thus become half-don't not responding Some features work othe
-
XP Pro SP2 - taskbar not there, missing icons. How can I fix it?
The home screen takes longer than usual to load and the taskbar and icons appear not - just the paper painted. I recently reformatted XP and the same thing happened before that's why I reformatted XP. That solves nothing. System Restore does not reso
-
Cannot reset or recover Windows 10!
All attempts to reset or recover windows 10 will result in a failure - nothing has changed. I did a backup image, but it fails. I did restore but points they keep disappearing. What are my options now?