I have problem with the upgrade of windows 8 for windows 8.1

Similar Questions

• I have problems with the installation of Add-ons for InDesign CC 2015. How can I reinstall InDesign CC 2014?

  I have problems with the installation of Add-ons for InDesign CC 2015. How can I reinstall InDesign CC 2014?

  There's direction at the bottom of this blog post: http://indesignsecrets.com/avoiding-problems-installing-indesign-cc-2015.php

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Problems with the upgrade from Windows Vista to Windows 7 error

  I try to upgrade Vista Business 32-bit Windows 7 Home Premium, but I get an error at the beginning of the installation message saying "Windows could not retrieve information about the disks on this computer.  After clicking on the close button, its takes me back to the opening screen.   Its a laptop with 3 GB of RAM.  The program compatibility tells that should work, can anyone help?

  Are you trying to upgrade Vista while it is running or are you boot from the Windows 7 DVD? Note: Windows 7 Home Premium requires an installation "Custom"and clean up as there is no path inplace upgrade (see below).»

  Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements
  1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  16 GB of disk space available (32-bit) or 20 GB (64-bit)
  (Note: 16 GB is a strict minimum and unrealistic, suggests at least 32 GB or more)
  Graphical device DirectX 9 with WDDM 1.0 or higher driver

  Windows 7 upgrade paths
  Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

  .

  Windows 7 upgrade paths
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Decrypt Windows 7 upgrades: the official rankings
  http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
  (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

  Which is right for you?
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  List feature that provides each edition of Windows 7:
  http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

  Windows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
  http://www.PAGESTART.com/windows7proupgade.html

  Users of Vista Home Basic, your choice of upgrade is: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
  Users of Vista Home Premium, is your choice of upgrade: Windows 7 Home Premium or Ultimate 7

  Users of Vista Business, your choice of upgrade is: Windows 7 Professional, Ultimate or Enterprise
  

  Users of Vista Enterprise: only one way of upgrading that is: Windows 7 Enterprise
  Vista Ultimate users: once again as a way of upgrading that is: Windows 7 Ultimate.

  J W Stuart: http://www.pagestart.com

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• Problem with the upgrade to Windows 7 Professional to Windows 7 Ultimate

  Hello

  My Dell laptop came pre-installed with Windows 7 Ultimate 64 - bit version. But there was a hardware problem, and I had to re - reinstall Windows 7 on my Dell laptop. But then, without knowing it, I installed Windows 7 Professional 64-bit (for which I had the key too) & began to work on it. Later, when some drivers were not installed correctly because of compatibility issues, I realized the truth.

  Then I tried to update my Windows 7 Professional current operating system to Windows 7 Ultimate-operating system by using Windows Anytime Upgrade without having to re - install Windows from scratch, I have so many applications and data on my laptop now. And I used the key of Windows 7 Ultimate version I have with my Dell laptop. But the key is not be accepted by the Windows Anytime Upgrade application and the following error message is displayed:

  "Enter a different upgrade key

  The upgrade key you have entered is an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. "

  Please help me in this regard to solve this problem so that I can improve my Windows 7 operating system without having to re - install from scratch.

  Thank you

  Romaric

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and system integrators or keys, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  The key that came with your mobile PC is an OEM key, which most likely why it fails to upgrade.

  J W Stuart: http://www.pagestart.com

• Problems with the upgrade to windows 7 8.1

  I have X 1 new carbon and the first thing I did was improve it with CDs that followed. CD 1 n ° 2 has failed and the PC crashed when I tried to take the operation again. Now, the screen flashes if I turned.

  Get in touch with the Lenovo authorized service provider in your country for the new CD set, for free, I believe.

• HP ENVY4500: Problems with the upgrade of Windows 10

  I just upgraded my desktop PC from WIndows 7 to Windows 10 (the free update available).

  My printer doesn't have a job in the ot.  The diagnostics say that it is not connected, even if it is connected by cable to the computer.

  What can I do?

  Chrispy2

  Hello

  Uninstall the printer via the control panel and then reinstall the driver software of media supported by the manufacturer.

• problems with the upgrade to Windows 10

  I am a researcher who crunches numbers.  I use a software called statistical package Stata and I also use ArcGIS.  is it safe to upgrade to Win 10 and still get the productivity of win 7 Pro? earn 10 all my 24Go of usable ram?  any help/advice is appreciated.

  Yes, it's true.  And of course if you have Windows 7 Pro today, you will receive 10 Windows pro for free (as long as you install and activate it before July).  Thus, you will continue to have the professional version.

• Small problem with the upgrade to Windows 7

  Hello

  I wanted to upgrade to win 7 as it is OK, but I can't read all my costs. I've done one, but following an emergency (portable pirate apparently) and put on 32-bit without realizing it.

  How to bring back this cost? It is very worn.

  Thanks in advance

  Hello Joseph

  Sorry, but can you please tell us which model of laptop you have, which OS is preinstalled (your own image of the installation or recovery) and what you want to do exactly?
  You want to upgrade using the Toshiba upgrade kit or Microsoft upgrade disc?

  Please provide some info.

• I have problems with the installation of adobe reader for windows 10

  I can't install adobe reader for windows 10

  Hi magda, m

  Please see the troubleshooting provided in this KB doc steps: installation troubleshooting Adobe Acrobat Reader | Windows

  Check if that helps.

  Kind regards

  Meenakshi

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• I have problems with the Windows Update feature!

  I have problems with the function of update windows for KB2596598, KB2596744, KB2687310, KB2596786 with an error code of 80070641.  They keep for lack of update!  My current windows is Vista Home Premium! Do you have a solution for this?

  If System Mechanic is or has been installed, it is your troublemaker & you have lots of company!

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem application has caused!

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck