I have the Hello, I have a Windows Vista Business OP, 32-Bit - I'm not able to use my CD/DVD player - "the message,"Please insert the disk"as much as I insert a disc."

What do you think could beb solution?

I tried a solution by Microsoft, but I could not find filter lower or higher in the right pane - so I had to give up.

See below;

Windows Vista

1. click on Start

Collapse this includes this im

and then click all programs.

2. click on Accessoriesand then click run.

3. type regeditand then click OK.

Collapse this includes this image

If you are prompted for an administrator password or a confirmation, type the password, or click allow.

4. in the navigation pane, find and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

5. in the right pane, click UpperFilters.

Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

6. in the Edit menu, click delete.

7. When you are prompted to confirm the deletion, click Yes.

8. in the right pane, click LowerFilters.

Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

9. in the Edit menu, click delete.

10. When you are prompted to confirm the deletion, click Yes.

11. exit the registry editor.

12 restart the computer.

Delroy

Hello

There are several methods to check the high low filters and maybe it's not yet the real
the cause of the problem.

-------------------------------------------------------------------------------------------------------------------

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • I have a Windows Vista Business operating system that I bought in July 2008. It will change to Windows 7 free, no cost?

    I have a Windows Vista Business operating system that I bought in July 2008. It will change to Windows 7 free, no cost?

    Laughing out loud

    How does the Windows 7 upgrade Option?

    The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

    Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

    Read the info here to see if you qualify.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

    FAQ about the upgrade is at the link above.

    http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

    Windows 7 Upgrade Advisor.

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Railways upgrade to Windows 7 at the link above.

    For any other question of Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • error message: "Please insert a disc into drive DVD D."

    I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

    Hello

    Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

    Let me know if this solves the problem for you.

    Kind regards

    BearPup

  • Attempt of burning DVDs and receive message please insert a disk in drive E:, what I've done.

    I am trying to burn a DVD and I get the message "Please insert a disk in drive E:," what I've done.

    Hi mguttman,

    It is possible that you may need to date/reinstall the driver for your CDROM.  If you access the website of the manufacturer of your computer, you should be able to download for free here.

    In addition, please see the link for more information troubleshooting below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps! Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

    I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

    original title: EMAIL GEL

    Hello

    What updates do you have installed?

    Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig in the search box
    2. press ENTER.

    The System Configuration Utility dialog box appears.

    3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Measures to check the application event log:

    a. click Start.
    (b) in the search box type eventvwr.msc , and then on enter.
    c. now, click Application in the event viewer (local).
    d. now, looking for event log on the right side of the event viewer window.

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  • It cannot install windows vista pack 1. tried several times but not able to.

    Remember - this is a public forum so never publish information such as email or phone naked

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

    Download link for the 32-bit version of Vista SP1.

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

    Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330)

    If the above does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • I have a windows 7 Home premium 32 bit and it refuses to install my epson printer sx130... help please

    As a novice user, I would like to appreciateplain language please... lol

    The printer is connected to the computer?

    If so, unplug it, reboot your computer

    You must install the software driver for the printer first.

    After doing this, restart the computer, and then connect the printer.

    You can download the latest drivers from the following link:

    http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/10839

  • Windows Vista Basic - freezing to Chkdsk at startup, not able to move forward

    Hello

    When I started my laptop this morning, I got this message on the screen, with no clicks to jump

    Checking system C: files
    The type of the file system is NTFS.

    CHKDSK checks the files - full of 8 percent.

    When he was stuck on it for the time being, I started it hard a few times but it gets stuck again and again at the same level.

    I read a few tips and tutorials but the ctrl + Alt + Del or f8 does not work. I get the options to go to the screen of command or any other link what so ever to get out. This is the machine of my father with a huge amount of data in it and we are very distraught. Currently out of the country and have not any backup or a Vista DVD.

    Desperately need help.

    Best regards

    PB

    Then use:

    http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

    "It includes several tests that will examine the physical media on your Seagate hard drive or Maxtor any other hard disk. It comes to the procedure for the former (text) and new (GUI) version.

    DOWNLOAD:

    http://www.Seagate.com/support/downloads/item/SeaTools-DOS-master/

    See you soon.

  • "Please insert a disc into drive I" error message problem. Help, please!

    I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

    When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

    I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

    Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

    I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

    I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

    I thank the members of the forum for their help in advance.

    I really appreciate all help members can give me.

    1, the diagnostic software that youre looking for WDC, is a MS-DOS

    utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

    on disk, it automatically runs... With respect to the current problem, try to go to run, type:

    diskmgmt.msc

    MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

    close the msc...

    You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

    The type of disk list: list volume type: HELP for cmds all the...

  • Windows Vista Business 32-bit external drive does not work in the administrator account

    Hello, I installed Microsoft Windows Vista Business 32-bit on a Dell Precision T3400 workstation, and I have also configured the strategies of groups for Non administrators. Basically, I disabled the removable drives, 'C' and had "only for non administrators." After edit in GP, the system has been precisely set and I am able to access the Administrators account and copy stuffs from my local drive on my USB key. But a few days later, I'm not able to use my USB or other external drives in Administrator account, it shows that 'inaccessible '. But I can't access local drives 'C' or '. Then I have to redo the group policies and it will last only for 3 days. Thanks :)

    Hello

    You are on a domain network?

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  • Microsoft Windows Vista Business OEM product key issue

    I have a Windows Vista Business OEM product key but no CD. Is it possible to download the Image? Or I can upload the image of windows 7 or XP and install (enter the product key: Vista) free?

    Hello

    It's not Microsoft, and we have nothing to do with your downgrade rights.

    Read these information from Microsoft:

    http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/what_to_do_downgrade_rights.aspx#fBid=-8uYmGZfE4k

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Replacement of lost records.

    There is no Windows Vista downloads available from Microsoft.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Activation of Windows Vista Home Premium 64-bit.

    Help, please.

    Hello.

    I have a windows Vista Home Premium 64-bit, who began acting in the recent months. It came with a box of "Reinstall Windows" as a title, then "Windows must be reinstalled to activate it. Insert the installation of Windows, CD or DVD into your computer to start the process of relocation. I have a valid key, everything worked fine. I tried the recovery disks, forums and everything else. On that note, I spent a lot of time and I need either a link to re - download floppy disks to install Windows Vista to origin or a set of records sent me. I promise you do not have a code, and if the employee is requesting all the Windows I'll tell them the code, but I'm not so stupid to put it out in the open for all to see. Thanks for your help in advance! PC specifications are:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01756863

    Windows Vista Home Premium 64-bit.

    Please please please please please help. Did I mention it please?

    Thanks again!

    -TS

    Hello

    When you raise the pop of screen area, I suggest click you on the link in the pop box, and then do the following.
    (a) open Internet browser

    (b) type %windir%\system32 in the browser's address bar.

    (c) find the CMD.exe file

    (d) make a right click on CMD.exe and select "Run as Administrator"

    (e) type: net stop slsvc (it may ask you if you're sure, select Yes).

    (f) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

    (g) type: Rename tokens.bar tokens.dat

    (h) type: cd %windir%\system32

    (i) type net start slsvc

    (j) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient).

    (k) reboot twice

    (l) you will have to reactivate. Use activation by phone below method.

    Activation by phone-
    (a) If you have access to the Start button: click the Start button, type "slui.exe 4" in the search field and press the Enter"" key. This will bring up the activation of the phone dialog window. Follow the steps indicated by the window. The phone activation process should take only about 6 minutes.
    (b) If you do not have access to the button: Reboot and log on to Vista, a dialog window will appear. In this window, click on the option "access computer with reduced functionality. Once you do this, Internet Explorer or Firefox browser will open. In the address bar type "c:\windows\system32\cmd.exe" press ENTER, a new window will come up, type: slui 4 and press enterand follow the steps to activate by phone.

    See also the following link:

    How to find a phone number for a Microsoft Product Activation Center

    http://support.Microsoft.com/kb/950929

    Thank you.

  • stepupgrade windows vista business Japanese version for windows vista Ultimate edition

    Recently, I bought a laptop in the Japan. The operating system is Windows Vista Business Japanese Version. I'm not familiar with the Japanese language and because of that I wanted to change it to English. I had discovered to find the way to put in place, but I found there was no way else to solve except buy a new Windows Vista with English Version or mine upgrade to Windows Vista ultimate. And I want to ask a question:
    1. is there anything else beside what I mentioned above?
    2. If I decided to buy a Step-Upgrade Vista Ultimate DVD Business, should I buy with the same language version with my Vista business, Japanese Version? Or is it fine with Step-setting level Vista Business to ultimate DVD English version anyway?
    3. Please show me how to change the display language after upgrade my Vista to Vista Ultimate!
    3. in the future, if there is a problem that I have to reinstall the OS, this DVD of Step - update allows again?

    Thank you for your attention.
    I'm sorry, my English is not good enough, I hope that you will understand my questions.

    Best account.
    Louise

    Change language:

    1. to change your Vista professional Japanese language to English, you can buy a Japanese Vista Ultimate Upgrade disk/license.

    Then download the English language through Windows Update as an option Pack.

    Vista Ultimate upgrade must be done in the original language Vista came.

    2. your other Option is to buy a FULL Vista Business English version and do a clean install.

    3. If you want to reinstall, you need the original installation of business > Ultimate upgrade > re-download the optional updates in Windows English Language Pack...

    See you soon.

    Mick Murphy - Microsoft partner

  • Hello! I have a windows vista home premium and try to download visual web developer express 2010 but the extraction is not what I need to do?

    I am trying to download a free software an official link from Microsoft, it is called Visual Web Developer 2010 Express. I had a failure of extraction. I thought the problem was that I did not have a Service Pack 2 update, but I actually got it, so I do not understand what is lacking. I have a Windows Vista Home Premium edition installed on my PC. How can I download the app?

    Hello
    I suggest to use these two links to find answers to this question:
    http://www.Microsoft.com/VisualStudio/en-us/products/2010-editions/Visual-Web-Developer-Express
    http://msdn.Microsoft.com/en-us/library/ms349441.aspx
    hope this helps,
    Eddie B.

  • I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

    Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

    I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

    Hello

    Thanks for posting in the Microsoft Community.

    If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

    Please answer these questions:

    It shows in system properties?

    To open system properties:

    (a) click Start, right click on computer

    (b) click on properties

    (c) see if it shows Windows Vista with service pack 1 on windows edition.

    Hope the helps of information. We know if you need help. We will be happy to help you.

     

Maybe you are looking for