I have to buy a new mouse and a keyboard that is usb 3.0 compatible in order to upgrade to 3.0?
Original title: usb 3.0
I have to buy a new mouse and a keypad that is compatible usb 3.0 to upgrade to 3.0?
N °
USB 3.0 is backward compatible with your devices.
You will not remove all the ports on your computer when you add a usb 3.0 in order to continue to use the ports that you use now for your keyboard and your mouse. When you add a usb 3.0 controller on your computer you will have 3.0 ports in addition to your small gifts. USB 3.0 has audio, video, storage and mass devices most.
Keyboards and mice that you own now will not have 3.0 anyway, even with an adapter, but this isn't a problem. Because the increase in speed of 3.0 data transfer benefits hardly a device that awaits for most human movements in any case new devices are not necessary.
Colin Barnhorst
Tags: Windows
Similar Questions
-
I have thus upgraded to a Sony A58 camera and did a photoshoot. When I downloaded my files Adobe Bridge, just showed me the file type icon and wouldn't listen to samples. So I sent them to photoshop where I got the error message "Could not complete your request because the file appears to be a model of camera that is not taken in charge by the installed Version of Camera Raw." I also read up here in the forum that CS5 only upgrades Camera Raw plugins to date. I need at least 7.4 to open files. So this means that I have to buy a new version of photoshop to work on these files? Or is there a cheaper solution? Please help, it's my income and I can't be delayed too long on these images to give a customer.
If you have CS5, there goes that Adobe Camera Raw 6.7 and you need to 7.4.
There is a free way out. Convert the raws in DNG format to be able to open them in 6.7
First download and install the DNG Converter.
Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.5
Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.5
Then learn how to use it: Camera Raw: how to use Adobe DNG Converter - YouTube
The best for you in the long run if you stay from your photos is Lightroom and Photoshop | Plan of creative photography of cloud of Adobe
For $10 a month, you have access to the latest Photoshop and Camera Raw.
Gene
-
Please help me
Hello
If it was a Microsoft game download drivers IntelliPoint and IntelliType here.
Microsoft - drivers
http://www.Microsoft.com/hardware/en-us/downloadsIf another brand please visit the manufacturer's website.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My wireless laser 5000 mouse used to have a light on the background. It is no more. What I have to buy a new, or is there something I can do to remedy this? Thank you
Hello
1. are you able to use the mouse laser wireless desktop or not?2. have you checked the mouse on another computer?Check if the device works on different computers. If the device does not work, contact the Microsoft order in the (800) 360-7561 to get a replacement. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:
http://www.Microsoft.com/worldwide/See Help links:It will be useful. -
I currently have iMac, with Pro CS6, but it 6 years and running slow. I'm going to buy a new IMac and want to download the CS6 Pro Flash on the new IMac. Who should I contact for this? I have my serial number, etc.?
Hi byrone23065491,
You may please check out the link to download professional flash CS6 on the new computer applications download Creative Suite 6
* Enter the serial number of the product license.
See also Adobe Creative Suite 6 system requirements
Hope it will be useful.
-
I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?
Hi Yanni,
Tethered shooting works fine with Lightroom 6.4 on El Capitan.
You can then go ahead and buy Lightroom and perform the tethered shooting.
Kind regards
Tanuj
-
I have Dreamweaver CS4 and you have upgraded to Mac 10.11.1 - Dreamweaver, stop working for me. Is there an upgrade available? Do I have to buy a new one? If I have to buy a new version it keeps all my files?
You're better off with the latest version you can buy on a monthly payment plan. See here the new features Dreamweaver CC | Buy Adobe Dreamweaver CC
All your files will be retained when you install a new version. Indeed, Dreamweaver CS4 will remain on your system if you wish.
-
Recently I bought Photoshop CC for a PC. I now changed to a MAC and want to know if I can simply exchange the licence, or I have to buy a new one?
Hello
You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application
You can download the installer for Creative Cloud from here:
Creative cloud help | Creative cloud desktop.After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications
-
I am entitled to an upgrade, as I have CS3 I want to buy a new mac and install the upgrade on the new computer. How can I do this?
If you get two new machines and the CS3 allows you to get the price reduced for a year then you should certainly pursue it. However, I always recommend people to try before you buy. When you get the new machines install the trial version and make sure that it works for you correctly. Once you have confirmed it correct functions, then you can purchase the subscription.
-
I lost my microsoft arc touch mouse dongle. How can I buy a new one and where?
I've lost my dongle to arc touch mouse from microsoft. where can I buy or get just a dongle to be compatible with my mouse?
You will probably need to buy a new mouse. I don't know of any place that sells all the dongles. Any place that sells computers should be able to sell a replacement mouse.
Good luck.
-
I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista
Hello
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Activate? My hard drive was erased, do I have to buy a new product key?
MY computer has caught the virus from defender 2010 Windows and if my hard drive has been erased. Do I have to buy a new product key or y at - it a way to get my old one back? Thank you
If you do not have your product key, you have serious problems.
It is on a sticker on the case of the computer, or packaging and corresponds to 25 numbers arranged in 5 groups of 5 digits.
As you reinstalled Vista, and it is not enabled, we can not help you recover from your operating system running and active.
Contact the manufacturer of the computer.
See you soon.
Mick Murphy - Microsoft partner
-
What I have to buy a new version of windows, because my hard drive crashed?
My computer hard drive crashed and had to be replaced. After replaceing I, of course, lost my program of windows 7, it has been installed at the factory. I don't have a DVD. Do I have to buy a new version of windows 7 to 8 or is there a place to reload windows?
You can opt for a recovery disc from the manufacturer that will put your system to the way it was when it is new, or you can download the version of Windows 7 which shows on the COA sticker and use the code too...
Make sure that the COA key code is readable before you download the ISO, because without it, the ISO has no value. You should also keep a note of the key code in a safe place.
Select the version on your COA sticker...
Windows 7 Ultimate SP1 - U ISO
English x 86: X 17 - 59463.iso
English x 64: X 17 - 59465.iso
Windows 7 Professional SP1 - U ISO
English x 86: X 17 - 59183.iso
English x 64: X 17 - 59186.iso
Windows 7 Home Premium SP1 - U ISO
English x 86: X 17 - 58996.iso
English x 64: X 17 - 58997.iso
You will need to convert the download on a bootable DVD...
http://www.isoimageburner.com/
Also note that the second method leave you that to install all the updates of Windows, drivers for devices etc.
You must do this installation, utilities and antivirus programs
-
so jve had this new mob for nearly a month and today I received the message, to solve this problem, I have to buy a new windows 7, copy is authentic as the hard disk using a store bought pc im, im not exactly rich just go and buy a new windows at the moment as im still in school.
Thanks in advanceyou have two problems:
1. you use an Acer OEM SLP key on a motherboard retail. that does not work.2. your license is OEM and cannot be transferred to a new motherboard. (the only exception is specified replacement manufacturers had to make defection)If you have a certificate of authenticity windows 7 you can try to change the product key of your COA and activate by phone. There is a chance that they will be activate it for you.OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates -
I just got a new computer with Windows 10. I can't load my AdobePhotoDeluxe 2.0 on it. Is there a link that loading or it means that I have to buy a newer version?
CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
.
You MUST use the special version and the serial number on the page, not your original drive or serial number
.
When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option
Maybe you are looking for
-
I plan to put VMware Fusion 8.0 on my new Mac Mini, so I can run an older version of Quicken for Mac 2006 R7. I have more than 20 years, the Quicken data files and I need to be able to access these files years every so often for the purposes of inves
-
Please, I would like to know if someone is already using the "Panasonic FZ - G1" with a Labview application. This tablet uses the Windows 8 operating system.My destiny is to use with a USB-9234 device to measure mechanical vibrations.Thank you.
-
a dll Win32 winspool call for the issue of the printer status
Hello I apologize because I do not understand Win32. I for 2014 LabVIEW full development system and want to access the Win32 API. I am trying to write a function to determine if a printer is out of ink or offline for some reason any. I see that the M
-
Problem signing tool, person doesn't answer to RIM.
Hello I have always signed my software with the tool of signed without problem, Since last night I started getting the following error message when you try to sign my code: "The signature on the request of code signing did not check. The probable ca
-
How can I get my Dell Win 7 go completely asleep after awhile w
Desktop Dell with Windows 7 Home is not always completely asleep. The fan or hard drive never here down. I tried to adjust the power to alternative options and the monitor turns off, but the unit does not totally quiet, unless I have press the butt