I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

Similar Questions

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Problem to install the driver for the AMDA00 interface

  I have problem to install the driver for the interface of AMDA00 under the system of the device. I am using ASUS motherboard H87 - more.

  When I update the driver it is a prompt window found driver software, but has encountered an error trying to install it, 'access denied '.

  Get the drivers on the site of Asus, specific support to your me board

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• HP M477fdn printers have been impossible to install the driver for some users. We receive the error message following '0 x 00000006 '.

  have been unable to install the driver for some users. We do not receive the following error message.

  Error: 0 x 00000006

  Hi Sameer,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I would like to know some information.

  1. You are connected to a domain network?

  2. When exactly do you get this error code?

  3. Do you also have any error message?

  This problem may occur if the print spooler service is stopped.

  To start the spooler service, follow these steps:

  1. click on Startand then click Control Panel.

  2. double-click Administrative Toolsand then click Services.

  3. double-click on the Printer Spooler service and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  4. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  I would also refer to the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• L750D-14R satellite - cannot install the driver for the TouchPad Win7

  Hello

  I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
  "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

  If someone knows what can go wrong and how can I fix this problem I would appriciate it.

  Never had any problems with installing the touchpad driver.
  I guess its not the touchpad driver problem but the problem with your system.

  First, you must uninstall the old driver for the touchpad.
  This can be done in the control panel-> programs & features

  Clean the system using some freeware like for instance CCLeaner tools.
  Restart the laptop between procedures.

  Then download driver Synaptics driver Toshiba UE page.
  Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
  In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

• Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

  Greetings to all!

  Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

  Would be happy to be aware of how this problem... Thank you very much.
  Satellite A100-599
  Current OS: Windpws Vista Home premium sp1.

  Post edited by: Airtoground

  Hey,.

  > but without success.
  Does that mean exactly? You get an error during installation or what exactly is going on?

  > Only safe mode is available after the installation of this driver
  Why only safe mode is available? What happens if you start Windows in normal mode?

  And before you start a lengthy discussion: what laptop do you have?

  You may notice no problem if you install Windows recovery disk Toshiba?

• Cannot install the driver for DV6-6c11nr wireless network

  OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

  Hello

  Download and install:

  • Graphics driver AMD from here.
  • Realtek Wlan driver here
  • Here validity fingerrint sensor driver
  • AMD USB 3.0 driver from here

  If you will ask you to restart the system after you install a driver, please do it before you install the other.

• Blue screen after installing the driver for windows phone 7

  Hi all

  I installed the new version of Zune. When I connect my Windows 7 phone (HTC Mozart) to my computer (Vista SP1), the driver will install automatically. After that, he tells me to restart. When I do this, and when windows starts again, theres a BSOD with the following message:
  Driver IRQL not less or equal
  This only happens when I installed the driver for my phone.
  Once windows restarts and gets me to error checking etc and after that, it tries to start Windows again go through the process of "update configuration". Naturally the updates are not properly configured, and it restarts and tries to restore changes. This pretty much goes in a loop forever, until I restart, run in safe mode.
  I have no idea why what is happening, and search on Google did not help so far. Any help would be appreciated.
  Thank you.
  Euler

  The minidump files show the recent errors are errors IRQL_NOT_LESS_OR_EQUAL (a) and the cause of the error is OA001Vid.sys.

  The OA001Ufd.sys also seems to be involved in the accident.

  These two drivers seem to be the drivers for the integrated webcam.

  What you might try is the next update for the webcam to the laptop:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R213648&SystemID=STUDIO1737&servicetag=&os=WLH&osl=en&deviceid=16027&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=0&libid=17&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=302206

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install the driver for Deskjet F4500

  I get the error message: "the system cannot find the specified file' where to install the driver for F4500 to a new race of ASUS ZEN widows 7 64 bit and install then fails." Everything works fine on my old Lenovo (also Windows 7). Help!

  You try to use disk or have you downloaded the latest drivers on the website of HP series?

  Here is the latest version of the drivers for your printer and the full OS features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=4063&product=3944758&sw_lang=

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• says «Download and install the driver for memory card reader»

  Have a HP Compaq 2510p laptop with Window 7 Professional. In the center of the Action, it is said to download and install the driver for the memory card reader. When I do that, it says the following:

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Internet works and tried repeatedly, without success. There is also a vertical line on the screen of the computer that is still increasing so much width every day. Is this related?

  Thank you

  The vertical line is a strong indication that your screen is failing.  You will need a technician to replace it.  It will be not cheap.  Make sure that they install EXACTLY the good screen.

  Your computer is capable of displaying web pages?  If so, it is online and there is another problem that causes this download produce this message.

  Go to the HP support website and find your computer model.  Then find the driver, you need and download and save to your desktop.  Once you do this close the browser, and then double-click the update of the driver.

• Windows need to install the driver for your bluetooth device

  Hello

  I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC

  Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...

  on switchin' on bt this error mesge

  "windows should install the driver for your bluetooth device.

  automatic update of windows I've tried

  looking for a driver to support/broadcomm hp product support

  tried installin manually

  BUT NOTHING has WORKED.

  help please...

  For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...