I have to reset the charge cycle counter after replacing the battery?

Similar Questions

• If I unplug my charger for my laptop will stop, and then I'll I have to reset the SMC to turn back once again and I can't seem to stop the fan noise.

  My MacBook Pro retina display suddenly stop today and I had to reset the SMC to make it work again (I had a few problems with the reset it) but now, if I unplug the charger it will stop and I have to reset the SMC to run it again and I can't seem to stop the noise of the fan th What should I do?

  With the operation of MBP, if you open information system (Option key down in the Apple Menu), what does say in material > Power?

• Edge 14. Battery not charging after the Power Manager Update to 6.07 and resetting the battery.

  My battery will do not, at all.

  The gauge was obviously wrong to happen very quickly after reaching 20%, so I've updated the power to 6.07 Manager and then perform a reset of the battery (I'm sure it's in that order, perhaps first reset).

  After resetting the battery charged to 100% back, but as it is discharged, the charger was not.  With the power, the battery is located just at the same percentage and descends very slowly (about 1% in two days).

  I tried to play with the parameters of maintenance battery, the meter then said that charge will begin less than 80%, but the battery is already on the 20%.  I checked the firmware in the Manager of power and with the stand-alone program but apparently no update is necessary and T 42, 4755 FRU part number is not listed as needing an update.

  Current version of the firmware: 3f98-0004-0160-0130

  I tried uninstalling and reinstalling Power Manager.  The power windows manager also seems to have the same problem.

  I just baught the laptop last year, is a month out of warranty; I need it to be portable to work.

  I thought about buying a new battery, but it seems to be the charge function is not working, and the battery was working fine before the reset and the update, apart from the loss of certain abilities and the inaccurate meter.

  Product: 0578CTO Thinkpad Edge 14

  BIOS: 80ET61WW (2.01)

  Any help would be greatly appreciated.

  Nathan

  19% and declining

  Hi NINE.

  Thank you for hospitality, the effort and the answer.  Greatly appreciated.

  I tried this and just tried to reinstall the firmware of power management.

  I finally solved the problem after reading this post by:

  1 shut down the computer.

  2. unplug the power supply cord (and everything - usb and monitor cables).

  3 remove the battery.

  4. play with the spring on the battery switches and shake threatening (probably unnecessary, but you may want to give it 10 to 15 seconds on the laptop).

  5. replace the battery in the laptop.

  6. connect the power cord.

  7. start the laptop and connect.

  Thanks again.

  Nathan

  48% and load

• I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

  I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

  Depends on what year it is.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• I always have to reset the Date & time...

  Whenever I turn on my computer, I have to reset the time & date. How can I fix?

  Check the date in the BIOS. Or maybe flat CMOS battery (this is the round battery on the motherboard). Replace it

• Smartphones from blackBerry 7100 G white screen and I have to remove the battery, reinstall it.

  I'll be in the middle of typing, and then the screen turns white!. I have to take the battery out, put again and then I can get 5 more uses out of it and it white screens again. Sometimes I just need to make works with the black button on the top and it starts working again. What is the problem with my Blackberry? My company does not allow me to replace it because they are cheap. Any suggestions in addition to finding a new job? Boring it is slightly

  I found and installed the last o/s. MY Blackberrry still "white screens" randomly and I need either press the black button on the top several times or remove the battery and reset back to normal. New to the forum and made a typo

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  Too generic a question, can you clarify considerably more for us? Your question could be reformulated in the following way and always be true?

  "I can't start my computer once he has had a BSOD. Something overheated, but I don't know. I removed the CMOS battery and replaced in order to asure me that a bad overclock on a core component has not caused the problem. Now, it restarts correctly, what is / was the problem? »
  The foregoing, what I thought you meant. The above statement is correct?

• HP Deskjet 3830: Have repeatedly reset the printer's wireless network settings

  When I did a WiFi from my laptop to my Deskjet 3830, I does not specify the need for a password, but then when I came back the next day he asked my password (and refused to accept my normal netwrk password).

  I posted the question here, and someone told me to reset the settings of wireless network printer, who worked. But after a while, he returned to ask me the password and I have to reset again!

  How to avoid this problem?

  Greetings @peterB66,

  Thank you access the Forums from HP Support for extra support! I see you want to know how to stop the printer on an intermittent basis provide the password. I will do my best to help you with this problem.

  I suggest updating the firmware of the printer to see if it will help: DJ3830_R1604C.exe

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Acer Aspire M5 - came with 8 Win. Updated to win 10. Have to reset the PC. He will restore to 8.0 or 10

  Hello.  I have an ACer Aspire M5, which was recently upgraded to Windows 10.  I had a lot of questions, spent countless hours with the support of Microsoft and now I need to reset the computer.  I've lost all my files and programs (all files have been backed up) in the process of troubleshooting with MS, so not too big of a deal.

  Question - when I reset the computer, it switches back to Windows 8 or 10 of Windows?

  Thanks in advance for your comments.

  CK

  If you use the option to reset 10 windows, it returns to windows 10.

• Have to reset the flag of string value

  Hello everyone

  I'm trying to reset the flag of string value.

  I use node string indicator property to change the color, its evolution, but when the program runs again it should start default how to do it. Thanks in advance

  Here, it's in 2009

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Bad battery live on Sat M35X - how to reset the battery meter?

  Hello world

  I have a few years old Satellite M35X-S149, no problem so far however I have been affected by the life of the very poor battery (like 10 minutes of full load at 0%). I've reconfigured the power options so that she wouldn't do anything even when the battery went to 0% (not set auto standby extended) and it runs for another 45-60 minutes after 0% battery.

  So I guess the battery is faulty but not dead, and in my opinion, there is a sort of 'meter' that does not work as assumed, is it possible to reset o calibrate?

  Anyone ran into this same problem?

  Thank you!

  Hello

  I can give you a tip how to recalibrate the battery:

  1. the battery should be fully charged to 100%
  2. then you will need to change the profile of powersaving as follows-> Hibernate & standby off, disable the options that cuts off the machine when you batt. stabilize so that the machine stops when the battery is at 0%
  3 let the machine work for how long does the battery last
  4. once the machine stops itself when the battery is COMPLETELY empty, let the battery charge (the laptop must be turned off)
  5. check if it worked and repeat the operation if the result does not satisfy you
  6. in the case of NO success, I would replace the battery

  Welcome and good luck