I have to restart my computer every morning to activate the keyboard and mouse sometimes.

Similar Questions

• Logitech software unifyier do not see a receiver is connected and so I can't pair the keyboard and mouse to the computer.

  I bought a logitech keyboard and mouse.

  I contacted support and they work in another machine (vista), they say, that there is an error on this machine.
  When the connection to the wireless receiver, it shows and installs in windows 7 64 bit home edition premium, however, unifyier of logitech software can not see a receiver is connected and so I cant pair the keyboard and mouse to the computer.
  I've tried different usb, front and rear ports and USB 2.0 and 3.0, but there is no change.
  Any ideas how to get this to work on windows 7 that I checked and the devices are compatible with my version of windows
   
  Original title: keyboard and wireless mouse

  I suggest to download and install the Logitech Unifying software and restart the computer and check if it makes a difference. Logitech Unifying software lets you manage your devices that use a Unifying receiver. You can add or remove devices using Wizard of the software or to use advanced mode. The Advanced mode also displays the status of your paired devices, version of the firmware and battery level.

  http://www.Logitech.com/en-us/support/Unifying?section=downloads&bit=32&OSID=14&file=http%3A%2F%2Fwww.Logitech.com%2Fpub%2Fcontroldevices%2Funifying%2Funifying210.exe

  See also: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/38032/session/L3RpbWUvMTM3NTkyODY1Ni9zaWQvQ1g2bDJkeGw%3D

• macOS Sierra installed ok, but the keyboard and mouse freeze after a short use.  Does anyone else have this problem?

  I'm running a MBP 17 "(fin 2011) with CPU i7 2.5 GHz, 16 GB of RAM and an SSD 1 TB for storage."

  El Capitan has worked well and all updates have been applied.

  Sierra (production, not beta) installation went without a hitch.  However, after using Siri and some other applications (which I closed), I opened and used Pages (also just improved).

  After about 15 minutes, the bluetooth mouse has frozen, then froze the built-in trackpad and keyboard.

  I gave her a few minutes in the case where it is clear.  I have consulted the page document to my iPad and it updated on the MBP display.

  Finally he needed a hard reboot with the power button.

  I had to restart twice this way, but was running a different application when he stopped on occasion earlier.

  Anyone had this happen?

  Hello crashsite2,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to maintain your Mac and run as expected and I want to help you get your keyboard and the mouse works again.

  Whenever we see the same behavior with freezing equipment it can help reset the management system (SCM) controller on your Mac.  The control help SMC and regular systems of different hardware and connection on your Mac. Take a look at the article below to know how to reset:

  Reset the management system (SCM) controller on your Mac.

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.
  Best regards

• You want to exit sleep mode computer with keyboard and mouse.

  Original title: waking from sleep with keyboard and mouse

  IM on a newer dell, the thing is that it does not start unless I press the power button when im in mode 'sleep' I need to start from the keyboard and mouse is there something like this in the control panel under xp?

  Hello

  You can follow this link & check if the problem persists:

  To resolve this issue, follow these steps:

  a. click Start, click run, type control keyboard and then click OK. Open the keyboard Control Panel item.

  b. click on the hardware tab, and then click Properties.

  c. click the Edit settings button
  Note This step requires administrator access.

  d. click the power management tab and check that allow it this device to wake the computer is turned on.

  e. click OK, and then click OK again.

  Hope the helps of information.

• I have to restart my computer everytime I change my power settings?

  I wonder if I have to restart my computer whenever I passes between balanced power settings high performance every time.

  HA

  You do not have to restart when changing power management

• Why do I have to restart my computer whem goes online?

  Sometimes, I have to sign when switching to the line with any of my password and name and zip code, sometimes I have to restart my computer.

  Can you help me?

  Ted

  Hello gtptan,

  To effectively solve your problem, I would like to get additional information.

  What model computer do you use?

  What operating system?

  What browser are you using to get online?

  Who is your internet service provider?

  How are you connected to the internet is a wireless or a wired connection?

• After I download and install updates for windows, I have to restart my computer. But on reboot, I get a message saying "failed in windows recovery configuration" maybe not in these exact words I don't remember completely.

  I clicked on the button of my windows update and downloaded and installed updates "security update for windows 7 for x 64 systems based on" and everything is fine until I have to restart my computer. When the computer reboots, I get this message that says something along the lines of rupture in the configuration, the files back or windows. Can someone please help me here? I've tried everything I can think of and nothing works.

  Hello

  Can you try to start up in the Advanced Boot Options menu by pressing F8 during restart the computer? Then, select "Disable automatic restart in the event of system failure." I would like to know if it works.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Updated Windows cannot currently check updates, because the service is not running. You may have to restart your computer

  Original title: Windows Update problem, help please

  Whenever I go to windows update, it says "Windows update cannot currently check updates, because the service is not running. You may have to restart your computer"I restarted my computer, but the same message back steadily for several weeks. How can I fix?

  Thank you

  Hi Lydia,.

  There are three services that are important to check, download and install the updates. These services are Background Intelligent of cryptographic services service and the Windows update Service. These should be in the started state and currently running on the computer so that the computer connects to Windows Update Server, check the update that corresponds to the computer, and then download them accordingly.

  Follow the steps in http://support.microsoft.com/kb/2730071 and make sure that these services are started on the computer. If they are, then if he please stop and then restart the services. Restart the computer once that change in services.

  It will be useful.

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• I start my computer, I get the DELL logo, then I have to restart my computer ctrl alt del it continues for 2 to 6 hours

  Whenever I start my computer I get the DELL logo, then I have to restart my computer keys ctrl pressed Alt del this continues for 2 to 6 hours I'm finely getting online, how can I do this faster process

  Sez helps Vista...

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• You have to restart the computer to activate the keyboard.

  Original title: keyboard problems

  I have to start my computer and then restart it to activate the keyboard. my keyboard is plugged. It has benn going on for 2-3 months. I disconnected and then reconnected everthing.

  Hi David,

  1. what type of keyboard you use? What is a PS2 or USB?

  Step 1:

  You can try to use the keyboard on another computer and check if the problem occurs. You can also use a different keyboard on your computer and check for the issue.

  Step 2:

  If you are using a usb keyboard, you can try to reinstall the usb controllers and check for the issue.

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc in start search, and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error - Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer

  Original title - Vista sp2 64-bit windows program update is not running

  When I open the program "Windows Update", it has an "X" in a red shield symbol.  When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer.  When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download.  However, it never downloads anything, and the rest of the exclaimation mark orange.  How can I solve these two issues?  I'm guessing that repair will set the other.

  Hi doubleott

  
  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  Method 2:

  You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
  http://support.Microsoft.com/kb/971058

  I hope this helps.

• Is there a cleaner free update for old updates of windows. mine go back to 2010. If I delete them manually. I have to restart my computer for each of them.

  is there a cleaner free update for old updates of windows. mine go back to 2010. If I delete them manually. I have to restart my computer for each of them. How to remove the 'old' and what goes back to remove.it looks like repetitions of 6 years

  Cleaning Windows Update option is available only when you log on with administrator permissions.

  Select Start, all programs, accessories, System Tools, right-click on disk cleanup, click on Run as Administrator. Scroll the menu drop down and you should see the option of cleaning of Windows Update. Check the box before this option.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options , the System Restore tab and delete all but the last system restore point. Run Disk Defragmenter.

• I can't open firefox. Home page comes up, I get just the reporter Crash asking to restart/quit but every time I do the same message always comes back.

  I can't open Firefox. Home page comes up, I get just the reporter Crash asking me to restart/quit but every time I do the same message always comes back. I was not able to use Firefox for days now.

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  If you do not report, so we have a crash report ID. When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes
  
  or http://kb.mozillazine.org/Firefox_crashes