I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

Any help will be appreciated. I really need help.
Thank you.

Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

And? :)

Tags: Windows

Similar Questions

  • Toshiba laptops with ACPI error during the installation of Windows Vista Beta 2

    Many people including myself try to run Windows Vista along side XP on our Toshiba laptops, so that we can feel comfortable when buying vista. We expect no assistance phone premium. We would just like to know what the problem and hopefully provide technical information so Toshiba that would help their preperation for when Toshiba laptops are sold with Vista and hopefully solve this problem.

    Please people who want to try it either could leave a message on this forum or you can also find a group of enthusiasts to:
    Microsoft.public.Windows.Vista.hardware_devices under the heading of Tosh Satellite.

    We have so far put a lot of time and effort to gather all the information we have so far and would like to get to the bottom of this issue.

    Hello

    I don't know what you expect.
    The name of the Vista says it all: Vista Beta 2 version - this is a beta version. It is not official on the market with many bugs.
    Perhaps his works on desktop computers, but as you know laptops are different.
    I think that we must wait for a version of the end and the drivers of Toshiba.
    So you can be sure that this OS is supported and work properly on your laptop

  • Sound stops and slows down after the installation of Microsoft Vista SP2

    Its malfunction after installing Microsoft Visa SP2

    I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

    I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

    Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

  • I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

    I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

    Hello

    Make sure you have the latest network adapter drivers fron toshiba

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    and if windows update is at the origin of the problem change how to get updates to uncover the problem update

    When you have found the issue, a right click on it then invited uac then hide

    read the information on the link below

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

    I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

    Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

    My system:

    Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

    * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

    Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

    I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

    I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

    http://www.Broadcom.com/support/Bluetooth/update.php

    I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

    On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

    Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

    Thank you for your help.

    Support FREE from Microsoft for SP2:

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • SFC scan reports sidebar.ini and source file as a corrupted file even after the installation of WIndows Vista repair.

    Hey, I'm Ryan.
    I am running windows vista 32 bit and I get 2 files corrupted when I run SFC - they relate to the windows sidebar (sidebar.ini and store source file is also corrupted). I did a repair installation, and this always happens when I run the SFC.

    1 - is this going to cause any problems to my laptop if I leave it alone?
    2 could it be related to a virus?
    I'm sorry for the questions, but I'm confused as to how this happened... Any help would be appreciated.
    Thank you very much.

    1 NO.

    2 NO.

    This SFC message could be caused by the manufacturer of the computer adding gadgets to the sidebar before installation of Windows for you, or some other change to the sidebar gadgets

    http://www.vistax64.com/general-discussion/219350-sfc-cannot-repair-sidebar-ini-hash-error.html.

    http://support.Microsoft.com/kb/947595

  • I'm unable to save CS3 (have or pdf or whatever it is) after the installation of Windows 10

    I tried to change the compatibility modes and it did not work / error message "unable to save picture."

    You're welcome, Dan.

  • Pavillion g6: my laptop audio stop working after the installation of window 10

    After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

    Try to update the drivers via windows update or hp support assistant. Headphones work?

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

    Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

    Press the Windows key + X and then click System

    Click on advanced system settings

    Click the Advanced tab

    Under Startup and recovery, click settings

    Select Windows 8 and uncheck the box "time to display list of operating systems.

  • The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

    I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

    Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

  • Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

    Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

    Not compatible with the system after XP. Upgrade.

  • I have a Toshiba laptop and my touchpad does not work any idea on how to fix

    touchpad does not work on my laptop, it is a toshiba...

    Hello

    Some have keys that turns off the pad and many Toshiba have card keys which have a control.

    Control Panel - mouse - Touchpad is here

    Panel of configuration-device - mouse and pointing devices Manager - double click on info pilot.

    If no joy go to Toshiba Support and download the latest drivers for your version of Windows and 32 or 64-bit.

    Go here and put in your info model and search for the drivers for your system

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Toshiba support and drivers
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba Support Forums
    http://laptopforums.Toshiba.com/

    Contact Toshiba
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    =========================================

    It's my generic how updates of appropriate driver: you mainly want to update or reinstall the touchpad drivers
    and ALSO to get the Toshiba value added Package for your version IF it is there.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Satellite P20 - formatting drive HARD and the installation of Windows XP Sp2

    Hello world

    Beforehand, I want to thank you for taking the time to help me with my questions.

    Due to system problems I'm trying to re - install Windows XP SP2.

    Based on the installation process, I have two questions:

    1. when I start the PC, the operating system Windows XP installation CD in the CD drive, I am unable to run it directly. Instead the old operating system (which I want to remove) starts. Is there a specific key in the Toshiba P20 notebook that runs the CD automatically? I understand that when the Windows XP installation CD to run it gives me the option to format the HARD drive.

    2. If I want to format the HARD disk directly, what is the best way to do this?

    Once again, thank you very much for the help

    Best regards

    Q.

    Hello

    I assume that you have the original CD of Microsoft Windows XP.
    To install a new OS, you must start on this CD.

    Insert the CD and after laptop starting immediately press the F12 key.
    This will enable the Startup menu, and then you may choose the CD/DVD drive as the boot source.

    As to question 2;
    During the installation of XP Setup will ask you the HARD drive formatting. Simply to choose this option and the HARD drive will be formatted.

    Good bye

  • I have no sound on the computer after the installation of Windows XP.

    After the download of Windows XP in a torrent of the 'P2P' file on a disk. Then I installed it. But now, there is no audio device.

    Anyone know what I can do?

    Original title: no sound after installation of windows XP

    Hi paowie1,

    Thanks for posting your query in the Microsoft Community. You seem to have a problem with the no sound on Windows XP. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

    We start with a few questions-

    (1) don't you perform a clean installation of Windows XP?

    (2) what is the brand and model of the computer?

    (3) have you done other changes on the computer?

    I would like more information about the issue.

    Method 1-

    I would have you look at the article-

    How to troubleshoot sound problems in Windows XP

    http://support.Microsoft.com/kb/307918/en-GB#top

    Method 2-

    I would have you look at the article-

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    We know if you need help. We will be happy to help you.

    Thank you.

Maybe you are looking for