I have Vista recovery DVD on the English language?

Similar Questions

• Satellite m40x-249 "product Recovery DVD" in the other language

  Hello

  so, here's my problem

  I bought my laptop in Germany over 2 years ago that I live in Poland
  with her, I have produced recovery DVDs, German edition of course
  but my disk got zero terrible and I can't use it anymore

  is it possible to get a new one, not specifically in German, it can be in Polish (I prefer) and how much it will cost me?

  and I can make my own recovery DVDs, I already installed XP from another cd, found most of the drivers I needed (from site Web from Toshiba) but still i find some:

  DLA V4.95BUILD490B69B
  InterVideo windvd 5.0B11.475 - I0203
  V8.02.05 warranty booklet
  manuals V5.16
  Save now V7.22BUILD720B80E
  secure module SD V1.0.2
  Toshiba zoom hook V2.31.0.2C

  Anyone know where I can find them, I would be grateful

  THX in advance

  Other tools are only additional software that are provided with the laptop.
  This software is only available on the Toshiba Recovery CD and cannot be downloaded.
  All Toshiba drivers are published on the Toshiba page!

  If you wish, you can order the recovery CD of the ASP where you bought the laptop. In you case it s Germany.
  Finally and most importantly the recovery CD can be ordered only in the same language.
  If you bought the laptop in Germany, you will only get the recovery in relevant language CD.

  I'm not sure about the cost but it must be very cheap!
  Contact the ASP and simply ask!

  Best regards

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Extract Vista recovery DVDs

  Hi, I would like to know (before you try) if it is possible for "extract" the Vista version of my restore disk, if so please post a clue on how to start.
  If this isn't the case, would it be possible to use the recovery disk without changing my Partitions.

  After the first installation, I changed the size of the disk partition to a more than useful setting instead of divide 160 GB in two parts. It is, when you use recovery 'as-is' my partitions are back from the original size. Pls post for help here, there must be a way to NOT lose all data after Vista hangs or crashes.

  Thanks in advance, Tuurtje

  Hello

  As MrPacman mentioned, the Toshiba Vista recovery DVDs can not be extracted. The image on the recovery CD file is secure and I know it s not possible to open it using a tool like for example; Norton Ghost.

  The use of recovery DVDs will format the whole HARD disk and re-create the hidden Vista recovery partition and the system on the HARD drive partition.
  Simply said, the recovery CD redefines the laptop to factory settings.

  So, if you have important data and files on the HARD drive, backup it first before recovering.

• Qosmio G30-137: how to change the English language OS?

  Hello!
  I just bought Qosmio G30-137 of the Germany and he has Windows Xp MCE in German language.
  The recovery disk is also in German also. I would like to know if someone can provide me with the recovery in the English language disc or can someone tell me step by step what I need to do to make a format for install Windows Xp MCE version in English and what programms I probably need because I'm a newbie...

  The laptop has also two HARD drives with RAID technology.
  I can't wait to hear promptly.

  Hello

  Windows was delivered in German language, because you bought in Germany. You cannot change the language to English without the recovery or the original version of the Windows operating system English English CD.

  You can install the original Windows operating system but before you install the new OS you need to install the RAID driver.
  Check out this FAQ from Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB56012H0001R01.htm

  See also the similar topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8076&MessageID=30452#30452
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4603&MessageID=15170#15170

• My computer uses the English language. How to install XP SP3 that I downloaded in Spanish by mistake?

  I have a desktop computer that I need to update to download Microsoft IIS, which requires that I have XP SP3 installed. For some reason, the XP SP3

  I downloaded is in Spanish.  I've been will be ready when the computer says "I can't do it" because it's in a different language.  The computer uses the English language.

  Help!  After this, Ineed to download and install Ms IIS for Win XP.

  Thank you.

  Fred

  I have a desktop computer that I need to update to download Microsoft IIS, which requires that I have XP SP3 installed. For some reason, the XP SP3

  I downloaded is in Spanish.  I've been will be ready when the computer says "I can't do it" because it's in a different language.  The computer uses the English language.

  Help!  After this, Ineed to download and install Ms IIS for Win XP.

  Thank you.

  Fred

  Download the good Service Pack 3 for Windows XP you have to use...
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Specifically from this link... (<-- yes,="" that="" is="" a="" clickable="" link. ="" it="" will="" start="" the="" sp3="" for="" windows="" xp="" in="" english="" download="" for="" you="" from="">

• How to add the English language seen in my win 7?

  my laptop came without any view except the Arabic language and I want to add the English language, I tried to install it as said on the language packs microsoft learn how

  You must run Windows 7 Ultimate to change language.

  Ability of Language Pack

  In Windows 7 Language Packs:
  http://msdn.Microsoft.com/en-us/goglobal/ee461121#AvailableLanguagePacks

  You will see a Client Language Packs Table here that shows what language packs offer this feature. These features are new to Windows 7.

  To learn more:

  How to install and use languages in Windows 7 Enterprise and ...

• I want to change my language of windows to be the English language.

  Hello

  I want to change my language of windows to be the English language.

  Display language - Windows 8 change - Windows 8 Forums

• How to change the language setting in another language to the English language in hplaserjet1213nf all in one

  How do I change the setting other language to the English language in hplaserjet1213nf while a front pannel language printer

  Please explain step by step

  kindly answer me pl.

• I can't install the English language pack more.

  One day, I clicked on remove language pack by mistake.

  At that point, I stopped all of a sudden, but it did not work. So I turned off my laptop by pressing power botton long.

  And I just wanted to remove this package completely and install again.

  I did it. I uninstalled the English language pack and downloaded again.

  However, I can not install successfully over.

  Every time when I failed, this message appeared, English language pack - Windows 8 for x 64 systems - (kb2607607) [en-us_lp].

  How I can solve this problem.

  I think I must completely remove it again before its installation. How can I do?

  Hi Annie,.

  For a better understanding of the question, I would like to know what the full error message?

  This problem could occur if the language pack is not completely uninstalled. Try the steps listed here and see if it helps.

  Method 1 :
  To ensure that the English language pack is completely uninstalled, I suggest you try the following steps.

  a. Swipe in the right edge of the screen, tap settings, and then tap Change PC settings.

  b. press or click on the time and languageand then press or click on region and language.

  c. Select the language pack that you want to Uninstall and click Remove.

  Method 2:
  Now to download the English Language Pack, I suggest you to return the item and check if it helps.

  Note: Make sure you use a user administrator account to perform these steps.

  Add a language or keyboard

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Please tell me how to add the English language in photoshop?

  Hello! Please tell me How to add the English language in photoshop? I'm from Russia and acquired, respectively, also in Russia()

  Cloud of swap language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

  or

  A product of Adobe for another language or version of trading platform for CS6

• Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64

  Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64

  Hi nucar,.

  Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do _ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

  Otherwise you can try to download from direct download links available at: download Acrobat products | Standard, Pro | XI, X

  Kind regards

  Rave

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• Satellite A305-S6872 - lack of Vista recovery DVDs

  I buy Satellite A305-S6872 months back now, I want to recover my laptop back to the factory setting. I have a virus problem...

  But when I have I bought didn't find any CD/DVD recovery in the box. Computer laptop hasn t any recovery partition...
  There is an option in the start menu to create the backup of the drivers and application...
  Can someone tell me the solution? Is it possible to get this recovery CD/DVDs or download the image of this...

  Thanks in advance.

  Hello

  New laptop models are supplied without recovery CD/DVDs. The recovery image is saved on the HARD drive and you must create a recovery only media. I don't know how it works on US, laptops, but it should be similar with the European specifications. This means, on your desktop, you will find a shortcut for Toshiba recovery disc creator. Use of high quality DVD-R and create recovery media.

  Another option is to perform HARD drive recovery. To start press F8 for advanced boot option and check if there is option called repair my computer or something like that. Choose this option and simply follow the menu on the screen.

• A9P58UA #ABA: cannot use recovery DVD in the DVD player laptop external Envy 15-3033 CL

  I had to replace the hard drive of the laptop. A directed recovery DVD from HP. The internal DVD did not work, so I'm an external LG DVD player, model GP50NB40. I put the boot order in the BIOS to USB CD/DVD. However, the laptop does not recognize the DVD in the drive. I get a message this is something to the extent of the 'no disk bootable found '. I also hit F9 and selected the external drive to boot from without success. And for some reason, I also hit F11. Same message.

  I tested the DVD drive on another computer and it works fine. I changed the USB cable on the laptop to another port. No change. Does anyone have an idea how to proceed to load the software on the new drive? Thank you in advace for your time.

  Hello:

  I see that your laptop has 2 USB3 ports and 1 USB2 port specifications.

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5186791/model/5223304/document/c03151875/

  You need to boot from the USB 2 port.

  It would be the only suggestion I can offer.