I have windows 7 64 bit but it's not to activate and I found the tools activated, but no means me not help

Similar Questions

• I have Windows Vista 64 bit, but I need to use a 32-bit software

  I have a new computer with Windows Vista 64-bit and I need to use a program he wrote in 32 bits. The computer maker refused to get off my computer to Windows Vista 32 bit. They offered me to return my new computer (keep restocking fees) and buy an older version of the computer that is also 64-bit, but they are allowed to downgrade it. This 32-bit software is vital for me and now I'm stuck with this useless computer.

  Can I run 32-bit programs on a 64-bit computer?

  Most programs designed for a computer running a 32-bit version of Windows running on a computer running 64-bit Windows versions. The notable exceptions are many antivirus programs, and some hardware drivers. Drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to the Vista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  . http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx#EDH

  It should work OK Mick Murphy - Microsoft Partner

• I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  The problem lies in a PC with Windows 7 32 bit

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  Help/support on the Lenovo support site or their forums, review its their webcam and so does not part of win7

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  On Fri, September 14, 2012 03:06:02 + 0000, MerrellWilson wrote:

  It's 74GB and I used 73 GB

  Two points:

  1. If you want to delete some installed programs, do not make
  deletion of the folder they are in. That doesn't remove them only partially and
  can cause problems. Remove programs by in control
  Configuration/program Panel and features.

  2. a drive of 74 GB is a tiny disk these days. There are a number of
  things you can do to save space, but they are all basically
  temporary and you will soon find yourself in the same situation.
  The only real solution is to buy and install a larger capacity drive.
  Fortunately, they are very cheap these days; You can buy a 500GB
  drive for about US $65.

  Ken Blake, Microsoft MVP

• Installed windows 7 64 bit, but there is no sound driver.

  Original title: Audio drivers:

  installed windows 7 64 bit, but there is no sound driver. Ive been to my card mother website http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/

  to get the drivers for my motherboard since my motherboard is used and came with no driver
  ultimately my PC does not claim any audio drivers, ive went into the bios and the same group leader to get sounds and weeks of googeling and research and still no luck and desperately need help to get the sound to my PC

  all your help has been very useful and instructive for the future of the resolution of this problem, but in the end, no audio drivers are compatible because the author of this motherboard is the audio drivers for the version of windows 7. I have audio now because my friend gave me an extra sound card laying around. Thank you to all who tried to help out me :)

• Have Window Media Player 11, but with Firefox as browser station radio does not turn on

  Have Windows Media Player 11, but the Firefox browser does not the radio station lights up. Already had Internet Explorer as browser, which helped the radio station lights. What keeps the station playing now since I changed browsers?

  This has happened

  Each time Firefox opened

  == Two days ago, when I switched to Firefox browser

  the same problem with me 2

• I have a vista 64 bit but loast company key a dvd where I can download vista Professional 64-bit?

  I have a vista 64 bit but loast company key a dvd where I can download vista Business 64-bit on my HP?

  You can download Vista from Digital River (MS distribution partner) by using the links on this site...

  http://www.heidoc.NET/Joomla/technology-science/Microsoft

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• I have windows vista 32 bit(x86) ie 8 and 4 dates they fail with code 8007371 b

  I continue to receive updates that are installed automatically and they don't install, failed code 8007371 b. The four dates at present are Ko 21179717, kb2505189,.

  kb2508272, Ko 968930 all with the same error code. I have Windows Update agent and it says: an error has occurred when trying to use it. I have windows vista 32-bit (x 86), IE 8.

  Can anyone help, thanks

  0X8007371B-ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  If the tool does not help, check the logs for more clues...

  Logging

  The system update tool creates a log file that captures any issues that the tool found or fixed. The log file is located in the following location:

  • %SystemRoot%\Logs\CBS\CheckSUR.log
  • %SystemRoot%\Logs\CBS\CheckSUR.persist.log

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• I have Windows XP 32 bit and you want to get 64-bit Windows 7, how do I do this, 32-bit to 64-bit?

  I have Windows XP 32 bit and you want to get 64-bit Windows 7, how do I do this, 32-bit to 64-bit?

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (winodws.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I have windows 7 32-bit professional. It is said in the Activation status not available, product ID not available.

  I have windows 7 32-bit professional. It is authentic and for a few days I get the message that iI may have been a victim, and also the windows are not authentic. It is said in the Activation status not available, product ID not available. pls help

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  J W Stuart: http://www.pagestart.com