I have windows 7 and how to remedy a wireless connectivity problem when it; s a problem when it has detected the wireless adapter or access point

I have windows 7 How to deal with a problem of wireless connectivity. The problem according to the diagnosis of computer's wireless adapter or access which was detected point

You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

See the communication from this "criticism" - McAfee

Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

Tags: Windows

Similar Questions

  • Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

    «Problem with access point or wireless adapter»

    Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

    HI Maria,

    ·         What operating system is installed on your computer?

    ·         You have installed the latest drivers for wireless network card?

    Follow the suggestions below for a possible solution:

    Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: See these articles for solve wireless problems:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

     

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Let us know if that helps.

  • I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

    I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • How to enable detailed connection tracing ODI Studio? and how do I resolve a connection problem.

    Is it possible to get a detailed trace of connection attempts from the studio of ODI on my deposit work?

    I tried to enable tracing in changeant...\oracledi\client\odi\bin\ODI-logging-config.xml according to the instructions that I found here: http://haithanh8x.blogspot.com/2013/03/ODI-11g-agent-logging-tracing.html

    The studio.log file has been created, but it is empty.

    I use studio ODI and basically I want to troubleshoot why I can't connect to the repository. When I try the Test button, I get an error "Invalid repository connection", here is the error that is displayed under Details:

    oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

    Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection

    at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)

    at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:531)

    .........

    .....

    ..

    Other important details:

    1.-s' Please note that before I use the Test button under the repository login Panel, I'm able to choose my work deposit that was recovered in the receiving of work section using the magnifying glass.

    2 - I am able to connect to the database with SQLDeveloper using JDBC, in fact I can connect with exactly the same connection string that I use in ODI, also I have no problems connecting to the database using SQLPlus.

    3. - this repository database is on a cluster and as mentioned, I have no problems to connect to it with other tools. Don't know if being in a cluster makes a difference (I tried hostname, scan name and the names of vip to connect)

    4 - this database is running in another server, and I have had no problems connecting to the front. In fact, I restore to a different server no CARS and was able to use ODI. (maybe something in the new RAC server that does not allow the connection?)

    I would like to get a path to better understand what is happening while the Studio tried to connect to the repository. It seems to me it is able to read the name of the repository work so I don't understand why there are connection problems later.

    Question: is it the fact that I am able to read the repository name means JDBC work? (Please confirm)

    I'm running out of ideas on what to try, so your help is appreciated.

    Thank you!

    Answer the questions:

    1-to get a detailed trace

    One option is to use a thick connection instead of a thin. This requires the installation of customer Oranet and settings but allows you to trace the SQL in the side server. That will let you know what the problem is.

    2. to turn on tracing

    Under search support Oracle Oracle Data integrator, there is an information center that includes detailed instructions and examples (files) on how to configure tracing.

    3 - If the test button works and pulls the name of the repository work means that the connection works, unfortunately, is not sufficient because ODI does not use the connection string supplied to connect to the repository instead, it uses the language sql stored in the repository and uses SQL to connect, so location you will see two connections for the initial attraction of the repository data, and then the other link with the chain withdrew from the database. In this case, the problem was that the database of repository has been migrated to another server, the previous server that the connection was made with localhost, but it does not work on the current server, because it runs on CARS, so outside the ODI, I updated the SQL used to connect with the SCAN name instead , and I was able to connect. The SQL is illustrated in the trace obtained using a thick client.

  • I have window 7 ops.how to remove the desktop.ini

    I have window 7 ops.how to remove desktop.ini.pls help.

    Hi shajsomarajan,

    Thanks for posting in the Microsoft Community.

    I understand that you want to delete the desktop.ini

    Desktop.ini manual detection

    Here are the instructions for manual removal of desktop.ini so you can remove unwanted files from your PC. Always be sure to back up your PC before changing anything.

    Note: This manual removal process can be difficult and you may destroy your computer. We recommend that you use the SpyHunter spyware detection tool to check the desktop.ini.
    Step 1: Use Windows file search tool to find desktop.ini path

    1. Select start > Search > all files or folders.
    2. in the "all or part of the file name" section, type or "desktop.ini" file names
    3. for best results, select "search in: Local hard drives" or "look in: My Computer" and then click on the button "search".
    4. when Windows has finished searching, place the cursor on the ' in the «dans le dossier» folder ' of 'desktop.ini', highlight the file and copy / paste the path into the address bar. Record the path of the file to your Clipboard, as you will need the path of the desktop.ini file in the following steps the manual removal to remove.

    * To find out more about how to remove desktop.ini with file search tool

    Step 2: Detect and delete other files desktop.ini

    1. to open the Windows command prompt, go to start > run > cmd, then press the OK"" button.
    2. Type "dir /A name_of_the_folder" (for example, C:\Spyware-folder), which displays the contents of the file even hidden files.
    3. to change directory, type "cd name_of_the_folder".
    4. Once you have the file you're looking for type del 'filename '.
    5. to delete a file in the folder, type "del filename".
    6. to delete the entire folder, type 'rmdir /S name_of_the_folder.
    7. Select the process of "desktop.ini" and click the "End process" to kill him.

  • I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

    I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

    Hi, CPC,.

    Welcome to the Microsoft Answers Community!
     
    You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
     
    You log in to vista, you may not use any of the XP application and vice versa.
     
     
    Thank you, and in what concerns:
    Azeez Nadeem
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you

  • I have windows vista and somehow my picture turned screen 180 degrees backwards. How can I fix it?

    I have windows vista and somehow my picture turned screen 180 degrees backwards.  How can I fix it?

    Hello FrankHeinsohn,

    Hold down the ALT and CTRL together and then press the left/right/up/down to change the orientation. Press the combination of keys followed by the arrow key to the left first to see if this changes the orientation (you may need to press the selected keys a number of times to get the correct orientation. If the left arrow does not try the right, if this does not work try the high and arrow down.

    Usually, this action solved the problem. If she does not see if you have an icon in the Panel that gives, you go to your video card. Your card might be control NVidia or ATI control panel. Check the tabs until you see an option to change the orientation of the office. Yours, because the cat has his way, is currently portrait, change in landscape mode.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Please tell me how to make my laptop and printer work together. I have Windows XP and a series of HP Office Jet Pro K8600

    Please tell me how to make my laptop and my printer work together.  I have Windows XP and a HP Office Jet Pro K8600 Series

    The printer is turned on, power works fine, the paper is in the machine, not jams, computer is very good, I'm just not getting no response from the printer

    Hello

    Uninstall the printer, and then reinstall it by using the latest drivers from HP.

    You will find also find on the site of HP troubleshooting steps, once you enter your printer model number.

    http://WWW8.HP.com/us/en/support-drivers.html

    See you soon.

  • My computer have Windows reloaded and now I can't access my e-mail stored previously in Windows Mail. How can I get back them?

    My computer have Windows reloaded and now I can't access my e-mail stored previously in Windows Mail. How can I get back them?

    You can try to search for *.eml, but if the disk has been formatted first, they will not be there.  The files are also hidden, so make sure that you enable the display of hidden files and folders under control panel | Folder options | View.  You can also check with those who 'reloaded' of Windows to see if they have backed up your data first.

    See www.oehelp.com/backup.aspx#wm for information on the message to save the data.

    Steve

  • I have Windows Vista and my Security Center somehow got off? He asks me to password administrator and confirmation to light? How to do this.

    I have Windows Vista and my Security Center somehow got off? He asks me to password administrator and confirmation to light? How to do this.

    Hello

    1 are logged in as an administrator on the computer?

    2. you set a password in the computer?

    Enter the same administrator password that allows you to enter the administrator account when you try to connect to the computer and check if it is on or not.

    Let us know if the problem is solved or not.

  • NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    Message that appears is: -.

    Windows has stopped this device because it has reported problems. (Code 43)

    BB

    Install the latest driver from nVIDIA:

    http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

    http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I have windows 8 and can had a 651 error trying to connect to my Internet verizon wireless. Any ideas on how to solve this problem?

    I have windows 8 and can had a 651 error trying to connect to my Internet verizon wireless. Any ideas on how to solve this problem?

    This response may be a sound-end 2015 years.

    But in the case where some people have this problem I had.

    Correction on wireless W8.1 as follows,

    Find/locate connection network in "charms."

    Right click on Wi Fi - select DISABLE-wait a minute then

    RT click on Wi - Fi to ACTIVATE.

    Connect to your internet service provider when you see your SSID.

    Also a note if your printer or the wireless on cpu receiver

    Activate Bluetooth.

    I hope this helps.

  • I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

    I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

    Hi facions.

    What browser do you use?

    If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • TrayApp.msi missing. I have windows xp. How should I do?

    TrayApp.msi missing. I have windows xp. How should I do?

    Hi LarryBullington,

    ·         You did it of any material changes or software on the computer before this problem?

    ·         Exactly when you receive the error message?

    The TrayApp.msi file is associated with the HP Photosmart Digital Imaging software.

    If you receive a popup of the message, I suggest to uninstall the HP Photosmart Digital Imaging software and reinstall it back.

    Note: You can download HP software applications from the web site of the customer; or if the software was supplied with the computer, you can reinstall using the HP application recovery process.

    Reference: Resolving MSI startup errors

    Hope the helps of information.
    Please post back and we do know.

  • I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

    I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

    Hi DanBourque

     

    1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
    2. for how long have you been faced with this problem?

    3. did you of recent changes on the computer?

     

    You can re-register Windows Installer and check if this helps-
    a. Quit all Windows programs.
    b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
    c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
    d. restart your computer.

    I hope this helps.

Maybe you are looking for

  • Why is updated to the WORST update today, most excruciating history of Firefox?

    Auto update this morning Since then, I feel the worst, slow, excruciating experience ever I use Firefox since the beginning - how many years is it? This is my favorite - browser err, was... I'm about to switch to Chrome, if I have to wait about 30 se

  • disk partition utility grey buttons

    The new disk in el capitan utility is driving me crazy. To begin with why I can't partition during erasure.  Where is this option. I was able to partition a USB once but I can just manage to do it again. In the partition screen the + and - buttons ar

  • Windows services

    Hello How to get service status 'A' Windows programmaticlly? Using "System Exec VI" spoke as a way to start/stop a service with the appropriate command line text. Is this the only solution VI? If so, some details how? or any other solution? David

  • Computer does not start after the installation of Win XP SP3

    original title: ServicePack 3 does not work After loading service pack 3 my computer does not upwards, unless I use safe mode. It restores not to any restore point. I uninstall and go back to service pack two and get constant reminders to update thre

  • Unable to boot from the CD as it should a BIOS password, but I don't know it

    Hi all! I have MS Surface unit with Vista Service Pack 2 installed. And try to boot from the cd to create a system image. But I can't enter the BIOS (friend) because the password is required. I don't know the password. Please, advise what should I do