I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

How D link to connect to the modem connection

I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

Hi Bob,

You can follow this link & check if it helps:

How to set up and use remote connections in Windows XP?

Internet Connection Wizard


Reference:
How to configure Internet access in Windows XP Professional?

Hope the helps of information.

Tags: Windows

Similar Questions

  • I have Ipad Pro and you want to sync with my Mac computer.  The mac says I need an update iTunes buti already have the latest version on my Mac

    I have an iPad Pro 128 GB and you want to synchronize the majority of the elements of my Mac computer to the new iPad.  iTunes says I need to download the latest version, but it's already on my Mac which says that I have the current version.  How should I proceed.

    The iPad Pro requires iTunes 12.3.x, available here. You don't say what operating system you are using: v12.3 requires 10.8.5 minimum (10.9.5 If you want to use Apple Music).

  • I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

    I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I have a 8600 and you want to disable automatic fax report.

    I have a 8600 and you want to disable automatic fax report.

    Hello Sandy1959,

    Welcome to the Forums of HP Support! I understand that you want to disable confirmation of fax on your HP Officejet Pro 8600. Please follow the next steps in the front of your JO 8600:

    1. go in the Menu Setup (key)

    2. Select Fax Setup

    3. go in fax reports

    4. set the confirmation on OFF

    I hope this helps!

    Thank you

  • I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

    I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

    find it hard to imagine that Apple could sell these defective products.

    If the seller is an authorized Apple reseller, an independent company,

    You may need to ask you if you could see & try a different product sample

    because you might be looking at something that has a defect.

    {According to the related help page, Type position should be more

    stable to use. However if the keyboard is not flat, this sounds like default.}

    Sounds as if you're not at the official Apple Store (apple retailer)

    but, on the contrary, are somewhere else. Could you give more information?

    Some keyboard accessories are made by third party companies; so

    If the product has an Apple product model number, we note here.

    When considering the purchase of an accessory, it's a good idea to test

    and check in the store before you buy. An official Apple Store has

    a different return policy as an independent reseller of Apple.

    Don't know if I can be useful; These chat rooms are usually Apple

    users of products such as yourself, who have taken their unpaid time

    to see if they can help the other users of the product.

    Good luck...!

  • I have 3 I paid and you want to delete all the information that a a them. How to be painful that will not delete fron the 2 that I paid I want to use

    I have 3 I paid and you want to remove all the information ONLY one of them. How to be painful that will not delete the other

    You can go to settings > General > reset > erase all content and settings and will erase the iPad that you perform this action on. It has no effect on another device.

    See you soon,.

    GB

  • I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

    I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

    Yes, it should work perfectly, if wired (Ethernet) or wireless.

    Click on the network icon in the Notification area

    Click on the available wireless network that you want to connect

    In the list of available wireless networks, click a network, and then click on connect.

    Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

  • Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

    Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

    Located in and out on a section and that export brands.

    .. .Rinse and repeat for the other section.

    Name each section and where it is exported to separately... and as you wish

  • I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

    I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

    Hi Peter,.

    have you tried my clue at the top?

    Your serial number or an Adobe ID ready, then contact us.

    See contact http://helpx.Adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-a summary

    Or please click through http://helpx.adobe.com/contact.html and so "open" Please use the cat, I had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

    However, you can use ' phone numbers for customer service and technical support Adobe worldwide. "

    > https://www.adobe.com/eeurope/elicensing/licensemanagement/alm/contact.html (I used the link of Europe, but that makes no difference).

    Good luck!

    Hans-Günter

  • IM on an annual plan and you want to switch to the monthly. How to do?

    IM on an annual plan and you want to switch to the monthly. How to do?

    Hello

    You will need to contact support by calling/chat for this request.

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    Kind regards

    Sheena

  • I have new laptop and you want to configure itunes on it instead of an old desk top?

    I have a new laptop and want to configure ITunes on that instead of my old office... How can I do this?

    If you haven't done so already then authorize your account on your new computer via the shop > menu option allow this computer: authorize computer in iTunes - Apple Support

    You can then copy your backup your library and add it to the new computer via file > add to library

    Or copy it from the old computer: How to move your iTunes library to a new computer - Apple Support

    You can also use home sharing (file > share house), if both computers are connected to the same network, and you use the same account for the House sharing on both, to copy items between them.

    If you want to change the computer you sync your phone (or other iOS devices): synchronization to a 'New' computer or replacing a hard drive "crashed"

  • I have windows 2000 and you want to know what I have to do to update my program

    I have a computer which was given to me which had not been used for awhile and has windows 2000 and I need to upgrade and do not know what to do help

    On Tuesday, February 1, 2011 15:31:25 + 0000, madonna41935 wrote:

    I have a computer which was given to me which had not been used for awhile and has windows 2000 and I need to upgrade and do not know what to do help

    First of all, in my opinion, this operating system is already installed
    No matter, for the following reason:

    If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You don't know how the computer has been maintained,
    which has been improperly installed, what's missing, what virus and
    There may be spyware, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.
    If you reinstall Windows properly, you are playing with fire.

    Second, you must decide which version of Windows you want to
    install. Although you didn't, because you posted in Windows XP
    Forum, is that what you want to install XP? If Yes, let me point out that
    Windows XP has been interrupted, and find a copy for sale is now
    very difficult, except for a place like eBay. and if you buy it on
    eBay, you run the risk that you will get a pirated copy
    you will not be able to activate.

    Third, you must determine what that the hardware configuration of the
    the machine and determine whether it is adequate for any version
    Windows you want to install. An old machine like a race
    Windows 2000 is most likely insufficient for any version of
    Windows.

    And fourth, you may need drivers for some of the material in the
    machine for the version of Windows Installer. And with such an old
    machine, there is a good chance that there's no such thing as the drivers you need.

    What all this boils down to is the real possibility that you
    actually can't do anything with this machine without replacing the
    the majority of its material. And they can be economic to something
    do; you could save money and be better off buying a new machine that
    by doing this.

    Ken Blake (MS-MVP)

  • I have Windows Vista and you want to know, if I switch to Windows 7, will I lose my files, programs, settings and virus protection?

    Currently I have Windows vista. I want to upgrade to windows 7. I would lose my files, programs, settings, and virus protection

    original title: upgrade

    If you do an in place upgrade your files and programs will remain on the computer. If you perform a custom installation, you will need to back up your files and reinstall your programs.

    Installation - 'upgrade' means what?
    Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

    Installation - what does "Custom (Clean)" Mean?
    A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

    • Back up any files and settings you want to keep

    • Install Windows 7

    • Reinstall all your files

    • Reinstall all the programs you want to use.

    These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.

    If you are running Windows Vista , in some cases you can proceed directly to Windows 7, and in other cases, you must perform a custom installation. The following table shows what editions of Windows Vista can be upgraded to Windows 7.

    Windows Vista Home Basic

    Windows 7 Home Premium, Windows 7 Ultimate

    Windows Vista Edition Home Premium

    Windows 7 Home Premium, Windows 7 Ultimate

    Windows Vista Business

    Windows 7 Professional, Windows 7 Ultimate

    Windows Vista Ultimate Edition

    Windows 7 Ultimate

    For more information, see upgrading from Windows Vista to Windows 7 . (http://windows.microsoft.com/upgrade-windows-vista )
    You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
    If you have any general questions about reinstalling Windows , please see this site:
    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

  • I have windows xp and you want to update t wndows 7 I can do its on my computer as yars s 8 old

    My office is old and slow andi want to buy the disc of windows 7 to update, but was informed by the computer store I must 1stcheck soft micro see if can do it or need a new computer

    Hello

    Before purchasing Windows 7, follow these steps:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    See you soon.

  • I have Windows XP and you want to clear all of my browsing history.

    I'm in Internet Explorer and I used the help Option and he told me to do the following:
    1. click on 'start '.
    2. click on "Control Panel."
    3. in the find what box, type "convenience store".
    4. click on "show all".
    5. click on "security on Internet Explorer.

    Well, there isn't any "Internet Explorer security" here!

    I want to get rid of all my past browsing history, cookies, passwords, etc., so that nobody can see anything I did on my computer.  Also, how navigate private from this point on?

    Help, please!

    Thank you very much!

    • Internet Explorer 6?
    • Internet Explorer 7?
    • Internet Explorer 8?

    Yes - the instructions may vary by"version", if you need to know what version (ALT + H, yet the ALT key, release H and press A then all the buttons then in Internet Explorer) Internet Explorer you use.

    For example: to delete your browsing history in Internet Explorer 7

    1. Open Internet Options by clicking the Start button, click Control Panel, clicking network and Internet, and then clicking Internet Options.

    2. Click the general tab and then, under browsing history, click delete.

    3. Under history, click clear history, and then click Yes to confirm that you want to delete the history.

    4. Click close, and then click OK.

    To remove all or part of your browsing history in Internet Explorer 8

    1. Open Internet Explorer by clicking on the Start button and then about Internet Explorer.

    2. Click the safety button, and then click delete browsing history.

    3. If you do not want to delete the cookies and files associated with websites in your Favorites list, check the box of data from the Web site preserve Favorites .

    4. Select the check box next to each category of information you want to delete.

    5. Click Remove.

    As for the rest of your question - you need to better define what you mean by "go private" because if all you want to say is do not keep a history - just sure the value 0 days or put empty when you close Internet Explorer.  I wouldn't consider that private browsing, but some might if they are simply hidden some of their most obvious pieces of the local prying.

Maybe you are looking for

  • How to make a note on mac only?

    I want to be able to make a few remarks that does not synchronize with iCloud. In other words, I want to have notes that are in the program notes on my MAC which are not synchronized (and taking up storage iCloud). Here are the notes I did not need t

  • How to troubleshoot the work of e/s digital USB 6211

    My e/s digital USB 6211 suddenly stopped giving digital output. Board of directors when connected, LED flashes and passes the self-test. But refuses to give any digital output. Can someone help me please?

  • Connection of device to USB device?

    By using the 'comm:USB' StreamConnection, the device will support a USB connection from device to device with a microphone-to-microphone cable?

  • BlackBerry smartphones can not remove the icon...

    About two days ago with the number '1' in front of him a little envelope icon directly at noon under the hour and the day/date, which are stacked in the center of the upper InfoBar at the top of the screen.  This envelope will appear in italics vs th

  • How we prevents automatic downloads/upgrades of Sftwr.

    Can someone please tell me how to change the settings in Adobe Reader and other products to avoid automatic downloads?  I want to control when occur downloads.  Thank you.