I heard LR6 suppose to work with the new cameras coming out like the Canon 5Drs?    No one knows for sure at this moment?

Similar Questions

• E - M5 Mark II: why LR6 can't work with the full 4:3 raw image for photos taken with a different aspect ratio?

  When you import raw, Olympus E - M1 or E - M10 images taken in different proportions to the native 4:3 sensor MFT format, LR will display the chosen as culture overlay to the full image captured by the sensor. This is very useful because in post processing time one can still control the exact position of the frame and change if necessary:

  

  I was very surprised to see that for the new E - M5 Mark 2 is not supported.

  The LR6 raw file exactly matches the image that was chosen during the shooting. 4:3 picture information are full present in the raw of the ORF file, which can be easily seen for example using Olympus Viewer.

  Is there a particular reason why this useful feature has been overlooked for E - M5 Mark II?

  Thank you

  Karsten

  Karsten, the Adobe engineer has just announced that the file you provided is actually the brand I don't have Mark II... or at least that's what shows the model name field in the EXIF data (which is what using LR, and therefore why you can see the complete data of pre cropped out). So, two possibilities:

  1. you have downloaded an older file (little likely, given the date of capture).

  2. your device is a brand I have, not a Mark II.

  3. you had already hacked the file to make it look like a brand, I have so that you could treat it in Lightroom before the release of LR6.

  What do you think?

• How are we supposed to work with the new motion tweens if there is no editor of motion more?

  How are we supposed to work with the new motion tweens if there is no editor of motion more? Without query editor, we can see what kind of key frames are defined and we cannot set acceleration anywhere. Adobe go us back and use the old motion tweens does want now?

  Hi all

  Flash Pro CC 2014 (v 14.0.0.110) is now available for download through the creative application of cloud.

  We have included a whole new motion editor and several other new features with this release of Flash Pro. The new query editor is completely redesigned, intuitive and easy to use while retaining the basic features and backward compatibility with Flash CS6

  To call the query editor, just double-click on your motion tweens on the timeline (or right click and select "Refine the Motion") and the motion Editor opens in the context of the scenario itself. Double click again to collapse once you have made your adjustments.

  Complete list of the new features of Flash Pro CC 2014 is available at these links:

  Overview: https://www.adobe.com/in/products/flash.html

  What's new: https://helpx.adobe.com/flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Videos: https://helpx.adobe.com/in/flash.html

  Thank you

  Mabrouk

• Using ss12 on WIN10 just bought the new camera (7DM 2). The first does not work with my new camera. How can I update / install my brute last version (9.2 or at least 8.7)?

  Read most of the articles on raw on the website but can not find how to download and update my raw ss12 file. Website says 8.7 or later includes Canon 7DM 2. Anyone have any suggestions?

  GL2U wrote:

  Read most of the articles on raw on the website but can not find how to download and update my raw ss12 file. Website says 8.7 or later includes Canon 7DM 2. Anyone have any suggestions?

  If you've read this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  You cannot switch to more than 8.5 ACR PSE12.

  As explained in this faq, if you do not upgrade to the current PSE14, your free choice is to download DNGconverter Adobe. This allows independent software you batch convert a whole folder of your raw files to DNG format raw that your PSE12 can read and modify.

• How can I make adobe Bridge works with the canon rebel t2i camera?

  I have photo shop cs3 and never had a problem with front deck. Now, I bought a new canon rebel t2i and it will not recognize the adobe bridge.  Anyone know how I can do this job?

  you have to work with this camera and Photoshop cs4 atleat

  However, you can download the DNG Converter and convert all your images from the camera to the dng format, and then you will be able to open them in your CS3

  Download dng converter here:

  Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5310

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5309

  Kind regards

  Bartholomew

• RV220W works only with the PPTP server on one VLAN only

  Hello

  I have a RV220W (firmware 1.0.3.5) but I can't seem to work with the PPTP server on one VLAN only.

  My default VLAN is in 192.168.1.1/24.

  I created a VLAN ID 10 in 192.168.50.1/24 inter - vlan routing: disabled and device management: disabled.

  (Menu network > LAN > belonging to a VLAN and multiple VIRTUAL local network subnets).

  Then I configured a PPTP server on the IP 192.168.50.200 to 192.168.50.210 range.

  Finally, I created my user.

  (Menu VPN > IPSEC > VPN users).

  The PPTP tunnel is at work, but on all of my local network and not only the VLAN ID 10.

  Any idea? ...

  This seems to be a limitation of the firmware 1.0.3.5. Firmware 1.0.4.x will support the rules on access inter - VLAN, which I hope, can be used to restrict traffic VLAN by default your VLAN ID 10.

• Graphic/image field that works with the drive

  Acrobat allows you to set up a button to display a graphic/image and allows the buttonImportIcon field of JavaScript method to allow a user to select the icon of the button. This allows you to work with the player, but was taken away for some reason any. Create forms with LiveCycle Designer to an image field that can work with the player, but Acrobat is no longer made. There is no good reason to not allow for this type of functionality.

  I agree!! This feature is needed and necessary! Especially for us Mac users who cannot use LiveCycle!

• This memory will work with the 23-g010 Pavilion?

  I have a HP Pavilion 23-g010 all in one PC of office tomorrow. I have a question about RAM upgrades. I have a HP Pavilion laptop 2010nr g7. I looked at the specs and they look like both use PC3-12800-1600 MHz memory chips. No one knows for sure if the memory of the laptop will work in the Office? I would like to extend that 4 GB in the office by adding 4 GB of the laptop (to give the office 8GB). This would allow me to save money in new purchasting RAM for now.

  Does anyone know if the memory of these two machines are compatible?

  I don't blame you.

  No, if the memory is not compatible, the PC boots or something like that.

  It should not destroy your PC.

  Just make sure that you unplug before working inside the PC.

  According to me, that it will work fine as long as the tensions are the same.

  These two circuits must be of 1, 5V.

  Even if the chip is 1.35v, the worst-case scenario is that the PC does not start.

  Some memory claims DDR3L (low voltage = 1.35v).

• Unable to capture video with the Canon Vixia HV40 HDV - why?

  I am unable to capture video HDV via Firewire to my Cannon Vixia HV40. I am running Windows 7 Professional 64 bit on a computer HP DV6T Quad Edition laptop, using the native Firewire interface. I can capture DV standard definition without problem (when the unit is set to DV mode, Windows detects the device and the guests of action - if you select HDV mode, Windows does not, and the camera does not appear in Device Manager).

  So far, I tried to capture HDV in Sony Vegas, Windows Live Movie Maker, Cyberlink PowerDirector 7 and finally HDVSplit (considered as the common denominator of simpler, the lowest for the capture) without success. NOTE: the camera IS recognized in HDV mode. In all the above applications, I can go back, play and fast forward - there's a link that works at least at this level. When I try to capture HDV, I get different results - no success. HDVSplit starts playback on the camera and stops after 3-4 seconds, indicating that no data has been transferred from the camera. If I turn off scene detection, capture runs indefinitely, but the generated file is never more than 0KB. Director of Windows also appears to capture, but the file is still 70 KB and is not valid. Sony Vegas, same, begins the capture but never see any video. CyberLink Power Director, somehow, HDV recorded once a band - and can always record a live camera HD stream.

  I tried a lot of things:

  1 using the older driver 1394
  2 turn HD/HDV
  3 reinstall the capture software
  4 press the 'PLAY' button first, then enable "record", then the workflow is running.
  5. install the Canon software (despite the fact that it contains all drivers for camcorders) - in fact there is no driver for the Canon Vixia HV40. It is supposed to work with the Windows 7 driver. I tried both (W7 and legacy) with the same result.

  The Canon Vixia HV40 is documented as supported in Windows 7 by Microsoft and Canon - and yet there are many people on the Internet claiming to have this problem (although some people report no problems at all). I am sure that I do not see a 'Pink Elephant'. As this is a forum for Microsoft - I would be happy if I could capture in Windows Live Movie Maker - to keep the inconsistencies of the third part of the road. What should I try next? Is there a 1394 a generic driver that is certified to run on Windows 7?

  I went and hooked the camcorder new just to make sure that I can hardly believe it is now capture HDV. Perfect work. Believe me, I've tried evey solution I could find on the internet and it is the only one that worked for me. I found the solution on this forum and started to find only no sooner. I've only used it with Pinnacle Studio 12 so far... never mind, I just tried HDV Split and it works too. I had also planned to buy a SIIG NN-EC2812-S2 and if it had been less expensive, I did not hesitate. I tried from Best Buy's Dynex Express card, but he had the camera recognition problems and sent. I thought that you get what you pay and was actually looking for the best price on the SIIG when I came across the solution. I wish you good luck.

• Workstation XW4300: xw4300 will not work with the recommended graphics card (Nvidia Quadro FX 3400)

  I installed a graphics card hoping to update my computer.  The Nvidia Quadro FX 3400 was the highest assigned

  graphics card recommended for the workstation xw4300 system HP specifications page.  My system

  has a 460W power supply and I connected the cable 6-pin on the map and the map pins in the PCIe x 16 slot where

  the old card was.

  When I turned on the machine, I don't have even get a bios message or welcome screen.  All black.  But on all 10

  seconds, the power would cycle off and then come back.  HP says that this map is supposed to work with my machine!

  This card appears, making it non-functional.

  Any ideas?

  I ended up going with the Nvidia Quadro FX 1400 card.  He is listed as 75W and the map of 'medium' recommended for this xw4300 system.  I paid 10 dollars for it on eBay and it works great.  Do not use the Quadro FX 3400 map even if it is recommended by HP for this machine.  Food can't support.

  A witch hunt.  Equipment old and new software don't always play nice.  My machine has a new installation of Windows 7 Pro 64 bit on it, and running Windows Experience Index gives me the blue screen of death.  I put a meter on the power during the test problems... No..  It's a kind of driver incompatibility.  Win 7 says that the driver is the last, but he chokes on the

  test the index.  Funny irony is that I ran other tests which include benchmarking 3D rendering and nothing, but the Microsoft Windows Experience Index test stifles this card.  How about you do not run the Microsoft test to improve my Windows experience.  :/  Go figure.

  This card is older hardware, and because of that I don't have hope than Nvidia or Microsoft to make Windows experience test runs correctly with win7 64 OS.  Sounds like HP.

  Here's the kudo: the guy on eBay who I bought the card quickly refunded my money when he learned about the Blue error screen of death in Windows performance index test, so I did a free card.  I'll send her money

  Back to him.  I've never met anyone so accommodating.  These companies could take a lesson from that on what customer service means.  That's how you get regular customers.

• BlackBerry Smartphones "BOLD" speakers do not work with the battery cover on

  Hello world

  I'm a relatively new Blackberry owner.  I have "BOLD" for the last two months and it's been great. One of the things that impressed me at first was the quality of the sound from the internal speakers.  Everything worked well for the first few weeks. In the last fews days, I noticed that I was missing calls because I heard the ring. Then I noticed that I couldn't hear songs when played music library.  Thinking that it was some glitch of system, I took out the battery and it worked for awhile, but then stopped.  Only after that examine more closely did achieve the work of great speakers with the cap of dough, but as soon as I put it back top makes it almost inaudible

  At the moment I have with the lid not clicked in all above.  In this position the speakers sound fantastic, but the rear could in a click at any time and silent sound again.  Obviously not a good long-term fix. I searched these tips and have not found a similar problem.  Right now, I think to order a cover for replacement of Amazon to see if it could be that my current coverage is "folded" or otherwise do something weird to the speakers.

  I was wondering if anyone else has run into this and found a solution.

  Thanks in advance for your help.

  Rusty

  Wow, this is one weird, never heard talk about this problem before. If you have insurance for your phone, go to the store and get a new one, this is what I would do or you can use your warranty with blackberry and get a new one on their part. I know this isn't much help, but why bother with a different battery cover when you can probably get a new phone. If you decide to go with the new battery cover reply back and let us know if the problem is resolved.

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• High resolution quality of the State of stocks, Adobe and work with the previews?

  I used Sutterstock in the past, but being a CC subscriber, I am seriously investigate Adobe Stock.

  Because you don't actually see the image high resolution up to that after purchasing with Adobe Stock I can't say how easily compare its inventory with Sutterstock.

  I downloaded preview AdobeStock_52339199_WM which was, of course, low resolution and it was much smaller in size (preview 1000 x 662 cases real is 4590 x 3040).  Therefore, I really could not do anything with the preview since it's a "postage stamp" even if Larry White was a video how I was suppose to be able to work with the preview in Photoshop and when done, then buy the license.  And once again, in low resolution, I had know idea, with regard to the quality of the finished product, I'd be buying.

  Any help on these questions would be greatly appreciated.

  Hi Ray,

  I understand your concern. However, from now on, you will only be able to download the image in watermark, which is a version low resolution of the image. If you like, you can buy a version the same high resolution.

  Your comments are appreciated.

  ~ David

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?