I improved my Time Capsule 7.7.7 firmware and now I get a message that the "internal drive must be repaired.

Similar Questions

• I restarted my computer 5 times and I always get a popup that says: "your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? »

  Firefox does not open, but keeps asking me to restart even after I rebooted several times

  I have exactly the problem. Partly because my computer does not allow me to delete the Mozilla Firefox program folder.

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Hi, how can I find my serial number. Information transferred by time capsule of MAC, unfortunately ex recording was fake email, no entry for the adobe ID

  Hi, how can I find my serial number. Information transferred by time capsule of MAC, unfortunately ex recording was fake email, no entry for the adobe ID

  I sent you the details required in private message.

  Please use link below to download Lightroom 6:

  Download Photoshop Lightroom

  Let me know if it helps.

  ~ UL

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Every time I open Skype and try to read a message that it says Skype has encountered a problem. What can I do to stop this?

  Every time I open Skype and try to read a message that it says Skype has encountered a problem. What can I do to stop this?  Please answer as soon as possible.

  Uninstall the current version of Skype, and then reinstall the new beta version of Skype 5.7. See if it helps.

  Download Skype 5.7 Beta for Windows:

  http://www.Skype.com/go/getskype-beta-full/

  If not solve this problem, then

  Please reset a Skype:

  1. make sure that "Show the hidden files and folders" is turned on.

  Click Start, click Run Type "control folders" and click OK. On the display tab, make sure that the hidden files and folders is selected

  2. exit Skype: from the system tray > right click on Skype icon and click "exit Skype.

  3. click on start > run Type: rename file %APPDATA%\microsoft\windows\sendto "Skype" to "Old_Skype".

  4 re - run Skype

  Check if the problem persists.

• I get a message says "the site is unavailable at this time" with the error code [0 x 80070424].

  Original title: error code [0 x 80070424]

  My security alerts continues to tell me that the automatic updates are disabled. I check in the Security Center, and they are in position "on", but it won't download updates. When I go to the Microsoft website to update directly, I get a message says "the site is unavailable at this time" with the error code [0 x 80070424]. Microsoft doesn't even have it classified as a potential error code. I checked the status of the Fund Manager and it is set to "Auto" and it is started, but does not resolve the issue.

  Hello

  You did changes to the computer before this problem?

  Try the troubleshooting provided in the article below steps and check if it helps.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002

• I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  What version of IE are you using?

  The current version is IE8 - http://www.microsoft.com/nz/windows/internet-explorer/default.aspx

  IE9 (is still in beta).

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How do we change closing time of a screen, that I am working on automatic or reading? It closes and I can get it by pressing the key, but it's boring. Thank you

  How do we change closing time of a screen, that I am working on automatic or reading? It closes and I can get it by pressing the key, but it's boring. Thank you

  Hi TommieZook, I see that this is your first post here.  Welcome to our community!

  As for your question, there are few parameters that you might need to check.  #1 is the most likely:

  1. Power settings for your screen
     Press + W to find settings, and then type power to find and open Power Options.  On the left, click "choose when turn off the display" and set the timer accordingly.
  2. Sleep for your PC settings
     On the same page of the Power Options, click 'choose when the computer sleeps' to set the timer as well.
  3. Screen saver
     Windows 8 is not the screensaver on initially, but you can see these settings too.  For easy access, go to the desktop and right click, then choose Customize.  Choose screensaver downstairs and make sure that the setting of the timer is to your liking.

• I just went to run photoshop and I got an error message that my license has expired.  I bought this program (although there is a long time), is supposed to expire?

  I just went to run photoshop and I got an error message that my license has expired.  I bought this program (although there is a long time), but is supposed to expire?

  Hi sharonp3923897,

  The license does not expire. You may be able to correct the problem by following the troubleshooting steps in the following document: error "licensing for this product has expired". CS4, CS5.

  If you continue to receive an error message, please post a response to this discussion. Let us know your operating system and the version of Photoshop you use so that we can better help you.

  Best,

  Del

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• Access the 4th generation Time Capsule data remotely in Mac and PC

  Hi all

  I intend to log in case Apple support, but my Service and Support coverage is already expired > _ <.

  Apple PC does not support mobile devices like IOS or android, so in this top, I'll focus on Mac and PC.

  Appreciate if you guys could give me advice on how to set it up properly.

  Material and Configuration:

  -ASUS RT-AC5300

  Firmware version: last 3.0.0.4.380_3341 - g25420f5

  IP: 192.168.1.1

  -Configured Port forwarding, Port 548 to 192.168.1.85 in ASUS router

  -Time Capsule from Apple 4th generation (Firmware version: 7.6.7 last)

  IP: 192.168.1.85

  -Cable for direct LAN connection between TC Apple and ASUS router

  I can access my Apple TC LAN for PC and Mac (for PC, installed the Base Station Agent from the airport, for Mac, I access it via the Finder with credentials for password)

  Tried several times to set the TC to be able to access remotely to both Mac and PC platform, also read many articles, no luck.

  Grateful if someone here can guide me on how to configure it so that it works correctly.

  Screenshots below for Apple TC settings:

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/base%20Station.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/Internet.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/wireless.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/network.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/disks.PNG

  Thank you very much!

  Kind regards

  Terence

  In your Mac, in the finder, use Go, connect to the server.

  Type of AFP://yourpublicIP

  Download your public IP address of the router asus news... remote WAN you should use DDNS... iCloud is useless... disable in the TC... It does not work behind another router for most people.

  But you must use the public IP address or DDNS address... It is available in the Asus firmware. Best is to buy a static public IP address from your ISP... This is the only reliable method... is worth a bit of money on a dynamic IP.

  This is unnecessary for Windows computer... Access SMB is usually blocked by ISP and Windows does not support AFP.

  Please post your pictures directly here... It's so much easier, then, for us to see.

  

• I wish that my up... time capsule will photos supported this and I can't go back to use the photos?

  Hello!

  I have a Macbook 2006 A1182. I need to back up photos of her and my iphone 5 as storage is very complete. Is the time capsule the best system?

  Thank you! Nina

  If you want to save space of storage you're phone, import your images from Photos.

  If you want to save storage space on your main computer drive, invest in car inanexternal and keep the tire Photos library on this drive. Remember boot disk before running the Photos.

  Time Machineis a backup system, not a storage system. You should always have a backup of your main drive and external drives. Time Machine with another drive external hard makes it very easy to have everything backed up.

• Airport Time Capsule 3 to port usb2 and usb3

  Is the usb to Time Capsule on the new Time Capsule 3 to port a port USB2 and USB3?

  A USB 2.0 port.

  (141391)