I install lightroom 5 trial and I get a cannot change the module when I run for the first time.

Similar Questions

• Satellite L500-19 X starts and loads Win 7 always like the first time

  OK, so I bought a toshiba satellite L500 - 19 X to the United Kingdom in a store called carphone warehouse.
  It came with windows 7 pre-installed.
  I wanted the 32-bit version, so he ran faster, but he had installed 64, but came with a 32-bit restore disc.

  So I went ahead and restored, now, whenever my laptop starts up, it think it's the first time and load the toshiba implemented and stats to do things then restarts.
  He could do this all day until I hit escape and complete the configuration manually.

  No one knows how to stop this or I have to buy a full version of windows 7 and start again in this way?

  Please please answer now! Thanks in advance guys :)

  Thanks for this info!

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

• I installed creative cloud for Lightroom 6 trial and now my computer runs like an old lady of 90 with a market framework. It is clear, he can not cope, and I need to buy a new computer. How can I transfer the case to the computer again that I don't have

  I installed creative cloud for Lightroom 6 trial and now my computer runs like an old lady of 90 with a market framework. It is clear, he can not cope, and I need to buy a new computer. How can I transfer the case to the computer again that I did not yet?

  Please click the link for photography Software Digital | Free download Adobe Photoshop Lightroom CC trial

  .

  I hope this helps.

• When I try to download & install Lightroom CC why I keep get redirected to Lightroom 5 installer instead?

  When I try to download & install Lightroom CC why I keep get redirected to Lightroom 5 installer instead? And why Lightroom appears under "previous versions" in the creative cloud desktop application, but there is no sign of Lightroom CC under apps available?  What is a regional thing? (I'm in Australia).

  It has nothing to do with where you live. You are on a 32-bit system and LR CC is only available in 64-bit, so CC provides the previous version. It is that easy. You can read the system requirements and then act accordingly.

  Mylenium

• my computer is connected to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture on the projector

  I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.

  Hi Bill,

  Thanks for asking this question to Microsoft Community.

  I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.

  What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?

  Here is a link that provides information on connecting to a projector. Go through it and check if it helps.

  Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• When you get a retailer to re - install Vista are you able to burn a copy of Vista as when he was the first new and turned on for the first time?

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hey tiggerer

  NeoSmart is software startup repair not a recovery disk to reinstall vista

  and once you have replaced your hard disk you have lost the ability to do the recovery disk from the recovery partition that may have been defective hard disk

  and it depends on your version of vista as to whether you can now make a backup complete pc using microsoft software

  you need vista business or vista ultimate to backup full pc

  read information from microsoft about it at the link below microsoft

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  If you have not these versions vista expect from lenovo recovery disks be delivered or buy a third party program to do a full backup pc

  one of these programs is the true picture in the link below

  http://www.Acronis.com/

  have a happy holiday season

  Walter, the time zone traveller

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lig

  I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lightroom crashes.

  I uninstalled Lightroom, re-installed, but everything remains the same. After clicking on the play button, the video window is black. I can only kill Lightroom in the Task Manager.

  I use Windows 7.

  Thank you for helping me.

  OK guys, I have a solution. Press escape [ESC] to close the video window. Yes I know... It took less than hour of my time to understand this. If Adobe please, no matter how lucky you could focus on the provision of a useful product, not to invent unnecessary mess that have zero impact on your username? And Holy shit, employ a specialist UX, this is catastrophic!

• Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  Help, please!

  Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  I previously used the crd of memory and it works ok.  It also displays images must be downloaded but just let me download them.  This is the message I received:

  The following files were not imported because they could not be read. (496)

  So what I did is launching a new catalog that then wiped out all the records and traces of my previous photos!

  You talk of out of the frying pan and into the fire!  Can someone help me with this?  I have an important project to present - I'm Freelancer and looking quite the fool.

  E.

  Your old catalog is still there, use the file-> open the recent item

  The error "cannot be read" indicates that the folder where your photos are to be copied in has no WRITE permission. Change your permissions on this folder.

• I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

  I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

  Use one of the links below

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

  I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

  Download the files to install cs4 design premium and install ps to use them,

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.