I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

Similar Questions

• Failed to install an optional update due to configuration errors. Errors are now fixed, but cannot find the update to make another attempt.

  I installed Skype and I'm using a webcam Logitech C210. Sound works fine but the person that I want to connect with shows a blank computer screen. I checked the settings on my end and everything seems to work fine, including a short video of me at the bottom right of my screen.

  Microsoft sent an optional update called "Logitech-Communication, hardware device, Streaming Media and Broadcast-Webcam 210". However when I tried to install it failed.
  With the help of Microsoft Help, the problem with the update appeared to be several errors in configuration that have been set.
  However, I was not able to find the answer key updated to try to install it and hopefully the video problem knows my contact.
  My question is basically, how do I find the optional update.
  Thank you.
  
   

  Hello

  You should always get the hardware updates directly from the hardware manufacturer. in this case, Logitech.

  http://www.Logitech.com/support

  See you soon.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  I get the first screen where you have the choice to configure windows or press 'r' for recovery console.

  After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it.  Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on.  If I choose "C:" he then told me that there is already a system opperating on the partition...

  Hello

  Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
  ' http://support.microsoft.com/kb/316425 '.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  Hi lausworld,

  Please see the troubleshooting link below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• My mx6920 gateway upgraded to windows 7 now headphone works but no delegation cannot find the audio device

  I recently updated my mx6920 gateway for windows 7 and now, for some reason any laptop speakers will not work. The headphone jack works though. I tried to install the Audio drivers high definition on the RealTek site and was unsuccessful because windows has taught me that the driver is not the right one for the type of windows. Even when using the compatibility feature, does the same thing that I tried to use the Sigmatel drivers from the site of the bridge. These drivers ended up with the same problem. I checked Device Manager and it indicates that the audio device works. Who should ask me why do I hear audio from the headphone jack, but not the laptop speakers.

  any help you could give me would be greatly appreciated

  Thank you

  Hello

  We can refer to this article and check if that helps.

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3155

  You can also contact Support technique Gateway here: http://us.gateway.com/gw/en/US/content/contactus

  Thank you.

• HP Photosmart C6300: Photomsart C6300 HP cannot open the Bluetooth Menu and cannot install CD as ive got no CD player

  So I wanted to install my wireless printer and connected to the internet just fine. However, aparantly, you must install it via the CD that is given but my laptop is not a CD ROM drive so I can't do that. Is anyway to install it without using the CD?

  Second, I tried to set up via Bluetooth and I go to settings and scroll down to the "Bluetooth Menu" and when I click OK, it opens all open all the other menus, for example, tools, Netowork, etc..

  What continues? :/

  I do not have any connected USB or Ethernet cables because I read somewhere that it may not allow you to open the Bluetooth Menu.

  Hello

  For the second question: it requires HP USB Bluetooth adapter, you bought this part mentioned on his page:

  http://support.HP.com/us-en/document/c01490922

  And for the first question, if please download the suite of folloqing and install on your computer:

  http://ftp.HP.com/pub/softlib/software13/COL30126/MP-109713-3/PS_AIO_04_C6300_Net_Full_Win_WW_140_408-5.exe

  Kind regards.

• Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

  Hello

  I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
  I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

  I am aware of
  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
  The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

  I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
  Clearing keys does not work too.

  I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
  What can I do?

  Edit: will put some pictures of the uefi

  You posted the screenshots of the configuration of Toshiba utility.
  The boot mode must be changed in the BIOS settings.

  To access the BIOS of the laptop must be turned off.
  Then put the unit BUTTON and press F2 to enter the BIOS.

  In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• On Windows XP, I can't install Service pack 3. Keep saying cannot find the specified file and install shut-off valves

  I have re-uploaded service Pack3, about 3 times, each time in the middle of the installation, it gives a message with no error saying number cannot find specified file and stop the installation, I tried to do this with the firewall disabled, and even with the antivirus disabled. I can't use some programs because they require service pack 3. Please help me get installed so I can use the programs I already paid for.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Download Service Pack 3 (SP3) from the Microsoft Download Center if you have any problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  (http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4)

  Important These service packs apply only to 32-bit versions of Windows XP.

• Windows cannot access the specified device, path or file. You have no permisions them appropriate to access the element.

  XP tells me high when I opened a shortcut of the exe from my office. (PC-1)
  The shortcut points to an exe file that is located on another pc xp on my peer-to-peer network. (PC-2)
  Other PCs on the same network work very well do the same thing. In my research on it, I think it has something to do with me changing the name of PC - 1, after that I created the shortcut. (the shortcut works prior name change) Recreate the shortcut is not do me everything right.
  Unfortunately I do not have restore points to return and I have no restore for this PC no more disks.

  Help! What can I do?

  Hi yellow Jeeper,

  Would you happen to use Internet Explorer 7?

  Please take a look at this article about your mistake with a possible correction, applications of network share Installation generates an error: 'Windows cannot access the specified device, file, or path'.

  I hope this helps!

• User of Mac OS 10.6. New HP P1102w cannot get the wireless working. Impressions via usb ok

  Printer cannot find the network. I installed the updates of the printer, still nothing. There is no 'control panel' on this printer that I can find. Someone please help.

  Could send you more information on your wireless network? Information such as the type of router and what type of network security you are using would be useful.

  If your itinerary is compatible WPS, you can follow these instructions for setting up on wifi:

  NOTE: this method requires a WPS compatible wireless router to connect to the product.

• I just installed my new lifeCam VX 6000, the video is perfect, but cannot get the microphone to work. people can see me but can't hear me in Skype. Help, please!

  I just started using the LIFECAM VX 6000 and it's great for video, but I can't micro e to work with my video calls in Skype.

  I did the thing of parameters of hole, etc. and no luck so far.

  Any suggestions?

  Hi LauraYQ,

  Method 1:

  I would say that microphone set as default, you follow the instructions below:

  1. Click Start and click on Control Panel.

  2. click on sound, then a new window will open.

  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.

  4. now check if the Microphone is listed there and right-click on it and choose activate.

  5. Select the Microphone, and then click "Set as default".

  Method 2:

  If the previous step fails I suggest also you follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  I hope this helps.