I installed an external drive seagate, but keep geeting access denied message

Similar Questions

• IPad & Ipod Nao do not installed the drivers. Get the access denied message.

  IPad & Ipod Nao do not installed the drivers. Tried to update the drivers and got the access denied message. With the Ipod Nano "Type - hand-held device" get message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) on location IUMBus enumerator. In addition, 1 Kindle version is not as connected and same message by updating the drivers. I can see the Ipod Nano in ITunes. "Apple Ipod USB Device" and the "USB Mass Storage Device" work correctly.

  Hi Mos,

  Thank you for your update on the issue.

  Basically, UMBus enumerator or enumerator of Bus Mode user enumerates devices on different buses to user mode. Umbus.sys is the universal management Bus Enumerator driver and a 32-bit executable that requires no direct user interface. You may need to check if there is a yellow exclamation on this device driver in Device Manager and update driver if required. Refer to the following steps to do:

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Click view in the menu, and then select Show hidden devices.
  3. In the list of hardware categories, find and expand the System devices and select the UMBus enumerator(with a yellow exclamation point) and then double-click the device name.
  4. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please post back your results for assistance.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• My user is a member of the Administrators group, but I got ACCESS DENIED with some files?

  My user is a member of the Administrators group, but I got ACCESS DENIED with some files?

  I know the meaning of the trace, I did not sense trace in this sentence! Once again, I don't undrestand why a user as an administrator cannot access anythings?

  Administrators can access anything, but they often need to take ownership of a file or folder to open it. By examining the details of the property, the owner can easily say that an administrator has reviewed his file or folder.

• Unable to download a driver for an external drive Seagate - ST3160318AS.

  My PC Device Manager recognizes the newly installed hardware, install a driver but all attempts have failed. No installation CD is provided with this unit. I am inclined to believe the necessary software pre-installed, but the reader will show it, or give it up.
  The diagnostic analysis results indicate that all is well with the drive. It recently bought [yesterday] 'External Drive' sits like a useless piece with her running light 'on' and unusable for the lack of a "Driver".

  THANK YOU EVERYONE IN MY ABOVE DILEMMA - please read on:

  After reading a lot of articles and messages from the Forum on this issue, as well as information provided by the seller, I discovered the main cause of my pain was "Malware" by the name of "RESEARCH of CLARO", who himself had included in my browser and taken control through it's own 'Toolbar '. I also quite false information on the hard drive of my PC through many "blue screens". Now, I understand the import of the term 'Blue Screen of Death'.

  I was unable to uninstall this rogue program that he was not on my list of "Add/Remove Programs". Nor can it be found anywhere on my OS' it Drive in the lists of Documents and settings or Program Files. I stayed at loss as to how to remove the malicious program until I came across a list of my 'Cookies' PC on which were four entries that included "Claro". As soon as these have been removed, my computer is back to character, recognized the Seagate external hard drive and the appropriate screen is appeared on the screen after that was revealed the "dashboard" which allowed for the programming of the backup of 13.3 GB of data on the internal drive which eventually ended without incident.

  So, now, all right and if I never see Claro again it must be too early.

  Thank you, Ray.

  HDS most don't require software and drivers, if USB connected, and then try to update

  youre chipset software/drivers, this includes USB with it... In addition, you are in the hd's

  probably installed ok, you just need to get xp to run with him. To do this, go

  to run, type: diskmgmt.msc

  MSC, locate the hd, R.click on the space next to him (in black), select: create

  a partition, follow the instructions in the wizard. Once her thru, R.click on the hard drive, select: Format

  Follow the Wizard (using the default settings). Once her thru, L.click hard disk, go to

  actions, all, search & select "make active", once through, you are, out msc...

• GarageBand installed in external drive

  Hi all

  I'm running out of disk space on my MacBook Air. But I wanted to install GarageBand inside. The normal procedure is, I move the Garabeband application in the Applications folder, and when I run it first, it tries to download audio files. Problem is that there is not enough storage to all audio files, so the process will fail to half way through. I tried to move the application on an external hard drive and run it from there, but I think he's still trying to download the audio files to my library in the local storage of SSDS. I've read a few articles and did some searching on Google that explains that once you have installed and downloaded files, you can create a symbolic link and move these audio files on an external drive. My problem is that I don't yet have a facility of GarageBand.

  Please can you me the paths of standard files, so I can create symbolic links and I have garage band download the audio files on my external hard drive? Is there another process that would make me run garageBand?

  Thank you all,.

  F

  PS: A question side fast, I downloaded GarageBand for my iPhone and took the app in purchase to unlock everything. I love the app! Is it possible to get more instruments? Several agreements and tonal characteristics or these sequences of AutoPlay?

  GarageBand strives to install in two places - open folder/library at the top level of your system drive.

  Open the "Application Support" folder, there should be a GarageBand file inside.

  And library should contain a folder "Audio" with folders for loops.

  Has GarageBand already created partial files for this?

• my pc does not recognize seagate external drive seagate expansion 2 TB

  can you help me as to why windows recognize my two other external drives, but not this one?  I click on "my computer", but it does not appear? Should I do something?

  Hello

  1 - is the first time that you use the Seagate expansion 2 TB on this computer?
  2. what happens when you connect the Seagate expansion 2 TB to your computer?

  Hardware devices do not work or are not detected in Windows http://support.microsoft.com/mats/hardware_device_problems/

  You can also go through the following link for more information. http://support.Seagate.com/kbimg/Flash/213055/213055_EN.swf

• External drive Seagate 3 t, added to Windows 7 x 64

  Dear brilliant:

  I got a Seagate 3 use 1 terabyte external drive.) backup and 2.) offering an extra room for future projects. He is currently attached to my RESUME, Windows7 x 64 laptop. I have 6 G of Ram and a 650 (theoretical) Gig internal memory. 3T is obviously an exaggeration. However, it could allow do me a bit of his work / in the future, so I want to partition properly.

  This is my problem: I downloaded the recommended software to partition the drive, run the recovery, Seagate etc (Acronis). I also downloaded the manual on how to do these things, and it was filled with words that I had to search and received an education. But I don't quite know the Seagate Assistant is necessary? It seems to interfere with the closing of my system fast and has layers of capacity/complexity that I may not need.

  Anyway, will I be stupid? Or is the MSFT software currently on my machine all that we must back up my extensive files.

  I think (?) I understand the need for the TPG v MBR and would have to get a degree (after some study) nothing to do with the business of BIOS, but it seems that my HP is all set to these historic things. Not just partition the Seagate with Windows? What are the benefits to using Seagate Assistant with the Seagate external hard drive, if any? And what pitfalls could I meet, in both cases.

  It I said my peace. I look forward to great tips of your brilliant, as always...

  Valerie

  Hello

  Thank you for contacting Microsoft Community.
  Since you're using a 3 TB hard drive, I recommend to use the Seagate Assistant and select the type of GPT partition if it is equal to or greater than 2 TB. I personally advice not to create any partiiton as it will reduce the total useful capacity of the hard drive as being will take more space for stamp and other purposes of working OS - and if you want to create partitions, you are welcome.
  Consult the manual of Seagate or contact Seagate support for operations related to the change in the BIOS settings (confirm is it necessary or not).

• I need my Photoshop installed on my drive d: but this one installed on the C: drive how I can move it or is it possible to just uninstall then download and re - install?

  How can I move my Photoshop app on a new drive?

  I found a partial solution. I advanced and installed the creative cloud on the desktop (this red and white icon). Then I opened that upward. In the upper right corner, there is a little thing that looks like a gear. If you click on it and select 'Preferences' from the menu drop-down, it is a place to specify the location of the applications. It would be better if there was a way to install the Creative Drive C cloud also. Perhaps in the future Adobe that they will restore the ability to choose install drive.

• Adobe Application manager not install after many attempts, removing a last, but keep saying the same message.

  Following the instructions, running the application, but nothing happens and repeat the same message that I need to install the new Adobe Application Manager to fix the problem! frustrating!

  Do you use Windows or Mac computer?

  Mac:

  https://forums.Adobe.com/thread/1858724

• I try to install Captivate 8, trial version, but I get the following message appears: missing part archive file of Adobe Captivate 8 (64-bit)

  The entire message says:

  The file archive part of Adobe Captivate 8 (64-bit) is missing.  You need all parts in the same folder in order to extract Adobe Captivate 8 (64-bit).  You can download all the parts.

  What Miss me?  When I downloaded the file Captivate_8_x64_LS21, he said that it would be an extension of the .7z, but have downloaded as a .exe instead.

  Hello

  You receive the error because the two files (.7z and .exe) of Captivate 8 not downloaded in the same place.

  Please find the procedure for downloading and installing Captivate 8 (64-bit): -.

  Say the mention of the link below in any Internet Explorer open Web browser

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=Captivate

  Sign in using your Adobe id and your password, then you will be redirected to download the Captivate 8 Web Page.

  Do not click download. Kindly leave this window open as it is.

  Now copy and paste the reference to the link below in the new window of the same Web browser in which you opened the link above.

  http://trials3.Adobe.com/AdobeProducts/CPTV/8/Win64/Captivate_8_x64_LS21.7z

  Then Save the file.

  Do the same for the mention of the link below and save the file .exe so.

  http://trials3.adobe.com/AdobeProducts/CPTV/8/Win64/Captivate_8_x64_LS21.exe

  Make sure the two files (.7z and .exe) save/download in the same folder/location.

  NOTE: Wait for the two files at the end of download and then run the .exe file.

  Once you run the .exe, it will begin to extract the .7z file and provide Captivate 8 folder on your desktop that contains setup.exe. Run the setup.exe to install 8 Captivate.

  Kind regards
  Ajit

• I bought creative photography cloud plan and just switch to a mac computer. Photoshop and Bridge installed / ran VERY well. Lightroom keeps giving me error messages. I REALLY need to get back to editing. Please help if you can! TIA.

  

  Hi danellep

  Please refer to this Thread can not create the required folder

  Let us know if this helps

  Concerning

  Assani

• Cannot install the update of security KB979402 for win2k ("Access denied" error)... help?

  for awhile now, I have not been able to install "Security Update for Windows Media Player 9 for Windows 2000 (KB979402)", through windows update. I always failed, and here are the steps I took:

  (1) tried to use windows update. the program launches, recognizes a necessary update, downloads the file and fails to install, leaving this error message:

  "the following updates were not installed:

  "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  (2) reinstalled windows update agent according to the instructions here:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/c1d64ba5-AAA1-4EAE-AD04-d7e85418199e/

  I can't tell if windows update agent has been reinstalled successfully, but the problem persists.

  (3) tried to use http://www.update.microsoft.com/ where the file downloads but won't install.

  (4) manually downloaded "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  tried to install, a message "error installation KB979402, Access is denied."

  5) tried to "force installation" by entering this in run:
  C:\WUAGENT\Windows2000-windowsmedia-KB979402-x86-enu.exe /wuforce

  who did get a weird window listed some "availible orders"... end, passing through update.microsoft.com again proves the update has not yet been installed. I'm now ideas. Help?

  Are you running Win2K SP4?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~

  How to reset the Windows Update components?
  [Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit) only not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CD drive is not accessible. Access denied

  Hello

  The company that I started to work has created a Group Policy object that denies users from using removable devices such as cd/dvd players. They also have a group who has access to them, it worked most of the time, but I have problems with a single user. He is a member of the group that is allowed access to readers and removable storage however when he tries to open the files on a dvd, he receives an error:

  "D:\ is not accessible.

  Denied access to D:\ "(I think that this is the error that he sent me)

  I can remote in his work station and if I uninstall the reader of cd in Device Manager, reboot, reinstall, reboot, then it gives the same error, but if I uninstall the drive and reinstall without rebooting, the user can access the drive without errors. On the side, after a reboot it starts to make the same mistake. This seems like a problem with the users in AD account, as it is the only one that has this problem, but my manager does not re-create the user, is there another difficulty I can try?

  Hello KristopherH,

  Communities Microsoft's consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Because your system is in a domain environment, it would be better to post in TechNet ITPro for.
  Click on here for a link to repost your question in the Windows Server group policy forum.
  They will be able to advise on your question.

  Thank you

  Marilyn