I installed Kaspersky Anti-Virus 2011. But the system does not recognize.

Similar Questions

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

  Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

  Fix missing files:

  Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

  SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

  To resolve the startup problem:

  Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

  In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

• I have an old version of Illustrator (9) and I can't install it on my computer.  The computer does not recognize the drive.  Is there a way to get around this?

  I'm trying to install Illustrator 9 on my PC and the computer will not recognize the disc.  Is there a solution to this?

  You could look to see if there is a download link in the links of kglad in answer 1 # here https://forums.adobe.com/thread/1930162

• 750-103D want: I want to install a 3rd HARD drive but the system will not start

  Desktop motherboard has 5 heads SATA (of which 2 were used for the first DvD and HARD disk in the original Setup) and the box has 3 bays for HARD drive, but there is no additional power from the PSU cable.

  I installed a new SSD as my main and designated record the 1 TB of HARD drive that came with the desktop as my secondary school and office works just great.

  Now I tried to install an another 1.5 TB HARD drive for storage. I used a SATA power cable Y (1 male to 2 females) to extend the existing cable. However, to my great disappointment, the system is unable to start up. I guess that supply POWER 300 watts current is insufficient to start 3 disks to a single supply with extension cable.

  Issues related to the:

  1] sells HP a 500-watt power supply with power cable for SATA 3 HARD drive?

  [2] is a compatible power supply on the market (ie. not HP) who can stand in 750-103D envy? Brand/model and how much?

  Thank you.

  Hello

  Probably, you have misunderstood my response.  Unplug the original HD boot drive.

  Your question is not the power supply lack of insufficient power.  I have observed remains with HP computers with a power supply that would support three HDs off a 300 Watt SATA power cable voltage.

  Perhaps the third HD is formatted incorrectly or is defective.  The other possibility is that your SATA Y cable connection is defective.  You also need good 5V and 12V.  In addition, if you have made any hardware changes to your PC you have not indicated, then it is possible that you may need a bigger power supply.

• I want to install a yeti pro Usb device but the system does not seem to find it

  the yeti pro is a plug-and-play device that self settle, but for one reason or another, it does not do this. In the devices window that there a yellow sign attached to it, apparently not correctly installed,
  I downloaded the driver to install it manually but the pilot application cannot find the device on the PC, even if it is connected (all used ports) and the driver is not configured to install without the connected device
  I willl be happy if any1 can help out me
  Thank you

  Hello

  Glad to know that the problem has been resolved.

  Travel to your other question.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Uninstall process will not go by if there is no file in the program folder files.

  I you suggest to install tuneup utilities again and then you can uninstall programs and features.

  Please let us know the status of the issue.

• To install the new eSATA / SATA to USB 2.0 hard drive in an external enclosure but the computer does not recognize the drive in disk management

  I have an old computer with installed Microsoft Windows XP SP2 and 3.  I bought a new hard drive and also a new external hard drive for her case.  I have correctly installed the hard drive inside the enclosure, and I think that I have installed correctly (in the motherboard SATA port) eSATA port, according to the manufacturer's instructions.  I plugged everything... first eSATA, then power and power switch.  I restarted the computer, and I chose to analyze disks in disk management.  However, the new drive is not recognized.  The SATA port on the motherboard could not work or did I buy the bad, perhaps, hard drive enclosure for my system?  Or something related to the software?  Thank you.

  Hi Donnadream,

  Connect the hard drive to another port and check if that makes a difference

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 2: Download and install the latest drivers from the chipset of the computer or the manufacturer of the motherboard and check

  Step 3: Hard disk can be turned off in the BIOS; You may want to enable

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, it is a hardware problem, contact the manufacturer of the hard drive for a more specialized help

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones Pls help me my 9860 touch hangs when boot nd the system does not recognize the usb port when it freezes on startup

  Recently, my 9860 touch starts not finished... It stops at halfway when startup nd freeze... 2ndly starting my system recognizes usb d port, but when it comes to where it stops booting, the system doesn't see it me collapses more so to reload the software

  Hello Dtobs007

  Welcome to the community

  I recommend you try first method Mode without failure. Article ID: KB17877 How to start a mode BlackBerry smartphone without failure.

  Another thread explains how to fix this problem, for your reference.

  By JSanders. http://supportforums.BlackBerry.com/T5/BlackBerry-torch/BlackBerry-torch-9860/TD-p/2597381

  See you soon and good luck.

• How to uninstall a program, Kaspersky Pure 2.0 when the computer does not recognize it?

  I installed a trial version of Kaspersky Pure 2.0 and cannot uninstall it. This means that I can not download my new Norton security package. I get a message that the file installed is not found.

  Use the Kaspersky removal tool:

  Withdrawal tool for Kaspersky Lab products

  If you are running a 64-bit version of Windows, also check c:\Program Files and C:\Program (x 86).

  Also perform a clean boot:

  • Click Start
  • Type: MSCONFIG.
  • Press enter on your keyboard
  • On the general tab, click Selective startup.
  • Under Selective startup, clear the check box load startup items.
  • Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  • Click OK.
  • When you are prompted, click on restart.
  • After the computer starts, check if the problem is resolved.

• BrowserPlugin works Simulator, but the device does not recognize the mime type

  Hello world

  Use the BrowserPlugin class in JDE samples, I was able to record a personalized with my BlackBerry mime type. When the browser makes a redirect to a specific page with the mimetype, the browser will recognize and use getBrowserContent() to move my application to the foreground, above the BlackBerry browser.

  I have this working on the Simulator, but on the device, I get the message: "unable to display the selected item. You want to save the item? »

  When I click 'No', I get the message: "Unsupported media type: application/x-vnd.rim.xxxtest.

  Like I said before, it works on the Simulator. I supported by the web server mime type, and I created a library project that will run at startup that will record the mime with the device type.

  I've debugged on my real device and confirmed that my library project is actually the launch...

  Someone know why this might work on the Simulator, but not on the device?

  Ah,.

  I'm embarrassed. I had unconsciously assume that when I used Javaloader to load my application to my phone that it would also include the referenced library projects... I was wrong!

  I loaded the library project separately and it works very well.

• the card inserted but the pc does not recognize

  When I insert the SD card into the computer, it will not regonize it and I can't import the image

  Maybe your AutoPlay settings must be changed:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Also... see the following...

  Here's a way to accomplish the task...

  Apparently, you have an external or internal USB media player?

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos of your choice in a folder on your hard drive
  drive.

  Just a select group of photos do a right-click and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.