I installed Modify headers with Mozilla, but can I add Android emulators?

Similar Questions

• I am trying to install Star Wars Republic Commando, but can't because I wonder who could not initialize (0xc0000135). What should I do?

  I am trying to install Star Wars Republic Commando, but can't because I wonder who could not initialize (0xc0000135). What should I do? I am running Windows XP Home Edition.

  http://www.GameSpot.com/PC/action/starwarsrepubliccommando/answers.html?QID=242323 Colin Barnhorst Windows 7 Ulimate x 64 on DIY with 6 GB of ram.

• Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom.

  Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom. Uninstalled all adobe, including Creative Cloud CC products.

  Followed the instructions on the forum using the soft Cleaner CC for OSX. Have rebooted several times and even tried using disk utility to repair any permission probs. Still no luck.

  The problem started to arrive from the upgrade the previous version of Lightroom to version more up-to-date. Im hoping someone can help me with ideas. Thanks heaps.

  Ended up solving the problem, not finding answers. Delete the following file

  com.adobe.acc.AdobeCreativeCloud.plist

• If you buy a mini iPad 2 with only WiFi - can you add later cell?

  If you buy a mini iPad 2 with only WiFi - can you add later cell?

  No, they are different models.

• I often trust my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall updates recent Mozilla up to what this module works with Mozilla, but I'm stuck? Thank you!

  It's probably very easy to understand this and to uninstall the updates to date, but, well, I am slightly tech-illiterate! I use my Norton Toolbar a lot for the sites I visit frequently, and this no compatibility issue is the same reason I stick with Mozilla on Chrome, but now I can not even use my Norton with Mozilla information. Thank you.

  http://community.Norton.com/T5/Norton-Internet-security-Norton/Norton-toolbar-not-compatible-with-FF-4-0-1/TD-p/442788

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• I had windows 7 x 64 enterprise installed on my HARD drive. now the company win 7 has expired, and I have to install win vista with sp1, but got a 0 x 80070017,.

  I can't format my HARD drive, but during a test partition, _X, who was only 26 MB in size of about was some sort created and vista tried to install instead of the main partition, partition (_: X) was created several times not by me, as I was using full disc for my installation. What's wrong?  fries, HARD drive, or win vista DVD fried, or win vista with sp1 wont install on a hard drive that had win 7 on it before formatting HDD and clean install that? Help? also, I got an error code 0 x 80070017.

  Hello

  1. When this error occurs during the installation?

  2. you have the Vista installation disc or the service pack disc?

  Method 1:

  I suggest you try the steps in the following article from Microsoft to install Windows Vista on your computer and check if it helps.

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  For more information, see the following Microsoft article to know the system requirements to install Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Method 2:

  I would also refer to a similar thread with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6749eaaf-6a40-4ED3-b5e2-8cb134cd1e39

  Hope the information is useful.

• I have Acrobat 8 Professional Upgrade and install on the new computer, but can not find the original software.  What should I do?

  I have a new PC and want to install Acrobat on it but cannot find a version upgrade.  I can't find the original software.  Since I already paid for Acrobat, I would like to reinstall on my new PC and upgrade to the latest version.  I don't want the Cloud version and am ok if the latest version of office is not the latest version of cloud.  How can I do this?

  Hello

  Where you purchased this product, if Adobe would then request make you to "adobe.com/getsupport. Connect using the credentials, and then select the option 'always need help contact us' & login to chat.

  The chat expert will help you with tools & look in your account

  Kind regards

  Christian

• ESXi 5.0 U1 could be installed on a SATA drive, but can't the SATA RAID

  This is the case:
  My physical server includes the Intel series E5-2600, Intel C600 (A for SATA) chipsets.
  In the VMware ESXi 5.0 Update 1 Release Notes, I find his support for chipsets Intel C600 and E5-2600.
  So I want to confirm if ESXi 5.0 U1 could be installed in my machine.
  In my test, ESXi 5.0 U1 can be installed with a SATA, but not SATA RAID drive. (Installed by CD)
  What's wrong?
  Waiting for your help.
  Thank you!

  Another feature that is missing in ESXi is caching block... So if you buy a hardware RAID card choose one with a battery to use the cache policy writing and write I/O faster.

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• As of today, why can't log on to the New York Times with Firefox, but can do with Internet Explorer?

  I called the New York Times, and they said that they had several people with the same complaint. I did not have this problem before today. Normally, I recognized when I go on the site and do not have to connect at all. Today, I was not recognized and when I tried to connect, it says that there is an unspecified error and wouldn't let me open a session.

  See also http://blog.mozilla.org/security/2012/11/01/preloading-hsts/

• I am trying to establish a wireless connection to my printer with my two laptops. I have succeeded with one but can't seem to get the other one connected.

  That connected easily enough.  I'm sure that I'm following the same steps I did with the other laptop, but when I get to the prompt "print test page", nothing happens.

  Hello

  Do both laptop using WIndows XP?

  See the links below and check if it helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_direct_printer.mspx?mfr=true

  http://www.Microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

• temporary free access to InDesign CC - I am registered with Adobe but can't figure out how to get to download them InDesign - can anyone help?

  Hi, I registered for the free trial of Adobe Cloud in an attempt to Indesign CC - but I get no further than "register new products" in my profile. I'm a complete Newbie - please help!  Thank you.

  Hi solawista,

  The link below you will find download instructions.

  Using creative cloud | Install, update, or uninstall applications

  If you face any sort of error, see the link below.

  Download cloud creative to troubleshoot and install questions

  Thank you

  Atul Saini

• Why my calendar clear when I installed the beta version and why can't add events?

  I downloaded and installed the latest beta version of Thunderbird and when I did, my full schedule of events and appointments disappeared and I cannot add anything to the calendar.

  I do not like this beta and restore the previous version which worked very well.

  Each version of Thunderbird has a matching version of lightning. The calendar is empty because you have not upgraded lightning when you uploaded the beta version of Thunderbird.

  Lightning versions are here. Get the software to match and your events will load up.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/versions/

• My Slimline s5-1020 is not HDMI. I just bought a HDTV with HDMI. Can I add a low profile video card?

  I found a fanless, so, apparently, that it wouldn't overheat. Also, I want a video card that is 32-bit or 64-bit? Thank you.

  Also, the presence or absence of a fan on the card should not be a factor on the HDMI.  Unless you're a player PC enthusiast or need to do a lot of intensive graphic type things, you should be ok with the card without a fan.  Keep in mind that you want to have adequate ventilation around the PC to make sure that the chassis fan can circulate more fresh outside air inside the chassis.