I installed Photoshop. But it was a misstake. He has been lying to install ID and have only. I want to uninstall the Photoshop. Can I do it myself?

I installed Photoshop. But it was a misstake. He has been lying to install ID and have only. I want to uninstall the Photoshop. Can I do it myself?

Hello

You can uninstall Photoshop by reference not to the following link

Uninstall or remove Adobe Creative Cloud applications

Tags: Adobe

Similar Questions

  • I tried to reset my master password and I was told it has been reset, but nothing was told that it has been reset, which is not good at all.

    I followed the instructions in the HELP section, reset the password. Tried to use the email once again, I was told it is the failure of the connection. I tried two passwords I thought that would work; None of them have. So now, I don't know what is the new master password. I don't even know if I can RECEIVE emails. If someone answers it, you can send the answer to two addresses? Mine is [email protected]. The other, in which case I can not mail there, is [email protected]. Any help would be greatly appreciated. Thank you.

    John Varley

    This is the second thread that you have started using 2 different user names. There is no need for this.
    Please continue your discussion in your original thread.
    At least read the answer and do not keep start redundant discussions.
    Here is your original thread.https://support.mozilla.org/en-US/questions/1044480

  • Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

    Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

    It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

    Thank you

    Corey

  • error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

    I cannot open photoshop, I get the error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem?  Thank you!

    Hi malloryf,

    Greetings!

    Please reset the Photoshop preferences and try again.

    Here's a similar thread: Re: preferences was not valid.

    Concerning

    Jitendra

  • I currently have Photoshop elements 13 installed on my MacBook Pro. Should I uninstall the present before as I have download creative cloud?

    I currently have Photoshop elements 13 installed on my MacBook Pro. Should I uninstall the present before as I have download creative cloud?

    Hello

    You can install creative cloud without uninstallation of Photoshop elements. There will be no problem.

    Kind regards

    Hervé Khare

  • I was a member of the creative cloud and got a new computer. I tried to remove the creative cloud from my old computer, but it seems that my subscription has been canceled instead. Is there a way I can restart my membership?

    I was a member of the creative cloud and got a new computer. I tried to remove the creative cloud from my old computer, but it seems that my subscription has been canceled instead. Is there a way I can restart my membership?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    Reinstall OS X from scratch and add more RAM.

    Ways to help make a slow Mac faster

    17 reasons why your Mac runs slower than expected

    Slow performance of Mac? This Article addresses!

    Difficulty of slow start in OS X | MacFixIt - CNET Reviews

    6 easy tips to speed up OS X Yosemite on your Mac.

    Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

    Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Things you can do to solve the slow Downs

    If your computer seems to run slower, here are some things you can do:

    Start with tours: OS X maintenance - MacAttorney;

    The X Lab: the X-frequently asked questions.

    " Safe mac" Mac Performance Guide;

    " Safe mac" the myth of the dirty Mac;

    Maintenance fast Mac Help.

    Start in Safe Mode , and then repair your hard disk and permissions:

    Fix the hard disk and permissions before Lion

    Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

    Repair the hard drive - Lion-Lion/mountain/Mavericks

    HD recovery start:

    Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

    When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

    Restart your computer normally and see if it helped at all. Then do little maintenance:

    For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

    Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

    Suggestions for OS X maintenance

    OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

    OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

    Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

    Useful links about malware Protection

    "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

    Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

    The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

    Difficulty a few pop ups browser that supported Safari

    Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

    Quit Safari

    Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

    Relaunch Safari

    If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

    It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

    An excellent link to read is Tom Reed Mac Guide of malicious programs.

    Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

    Check out these articles from Apple:

    Mac OS X Snow Leopard and malware detection

    OS X Lion-Protect your Mac against malicious software

    OS X Lion mountain - protect your Mac against malicious software

    OS X Mavericks-Protect your Mac against malicious software

    On the quarantine of file under OS X

    If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

    The user Joe Bailey comes this equally useful advice:

    The facts are:

    1. There is no anti-malware software can detect 100% of malware out there.

    2. There is no anti-malware that can detect all targeting the Mac.

    3. the best way to prevent breaches the most is for you as the user is aware that

    the most successful malware attacks rely on sophisticated social engineering

    techniques preying on human greed, * and fear.

    4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

    your computer is designed to trick you into installing their malware thinking it's a

    protection against malware.

    5. some of the anti-malware market products are worse than malware

    go where they are supposed to protect you.

    6. be careful where you go on the internet.

    7. don't download anything from sites, you know are safe.

    8 avoid links that you receive in email, always be wary, even if you get something

    you think a friend is, but that you did not expect.

    9. If there is any question in your mind, then assume that it is malware.

    Troubleshooting Applications

    I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

    If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

    Basic backup

    For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

    1. a panel of Time Machine preferences as part of the system of preferences;

    2. a request for Time Machine, located in the Applications folder. It's

    used to manage backups and restore backups. Time Machine

    requires a backup drive that is at least twice the capacity of the

    drive being backed up.

    You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

    1 Carbon Copy clone

    2. get backup

    3 already seen

    4 superDuper!

    5. Synk Pro

    6. Tri-Backup

    Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

    Referenced software can be found at MacUpdate .

    Additional tips

    Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

    Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

    Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

    Check for applications that may be hogging the CPU:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

  • My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  Now what?

    My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  He said that the license has expired.  But this isn't the case.  Now what?

    uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and then install correctly (do not migrate, use timemachine etc.) using the installation files.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

    Partitioning of a Windows 7 computer

    On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

    TIA,

    Steve

    Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

    Installing dual Boot with Windows 7 and XP
    (Read each method in this article and that fits your needs)
    http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

    EasyBCD allows to appear more user-friendly boot menu:
    http://NeoSmart.NET/DL.php?id=1

    J W Stuart: http://www.pagestart.com

  • Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for the navigation panel. There are no on which left aside, as the way in which it has been triggered open with the icon. how he was placed

    1 Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for my own mobile navigation panel. He's left no aside, the way it has been triggered open with the icon; how he was placed to bump at the gap when selected via the icon; how it was considered first of all just a big green square; How the link boxes were made to be spaced as if they were... Can you direct me how to create it?

    2. also in trouble with the specification of fonts. There are times that I can choose a font from the list, I chose the additional fonts available and sometimes, when it just won't let me choose one, even if it is already used on the site or page.

    On a steep curve here, but any new information provide from my recent contact with Adobe has been extremely useful. My site is www.curricula101.com. It is much better than what it was when I called first a few days ago. Sales pages work fine now, thanks to your contribution.

    3. on the navigation path revised: a current question is menus horizontal separated for the GMAT and GRE goes everywhere at the top and bottom of the pages. I've specified particular States for text via the Site Properties > content > hyperlink styes on the default style. A bright color is chosen for the active state, but he does not like such (not at all). The other menu (home, Contact, schools etc.) made by the widget Menu runs perfectly until white color shows in the current page instance.

    There are a lot more refinement and content development to do for sales purposes.

    Thank you for your help.

    Best wishes to all at Adobe,

    Elleyne Kase

    Hi Elleyne,

    1. I have an article on the creation of an accordion menu on my site which may help. You can read it using the link below.

    How to create an accordion Menu in Adobe Muse | Creative muse

    2. I don't know too much talk of it. When you say additional fonts do you mean web fonts?

    3. see my reply in the thread below.

    Re: Text links not working properly - active or visited says doesn't work do not at all

    I hope this helps.

    David

    Creative muse

  • I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

    I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

    Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

    Sign out of your account... Uninstall... to run vacuuming...

    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • I reinstalled just CS6 Master and it would be only doewnload 1 GB to 3 gb of updates before refusing to download 2.2 GB left because he could not update the Application Manager. WHY? It has been updated right before that I have re-installed.

    I reinstalled just CS6 Master and it would be only doewnload 1 GB to 3 gb of updates before refusing to download 2.2 GB left because he could not update the Application Manager. WHY? It has been updated right before that I have re-installed.

    In addition, he sends you on the parser that is no longer supported, and it sends you to a page for CS6 that refer to it at the bottom. There was no reference to the Application Manager in the journal of management files, only the extension, restart and the police.

    Finally found the patch on Google search. CC sound and includes versions of CS. ApplicationManager8.0_all.exe

  • I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    ===============================================
    You can resize a picture in WLPG but if you want to change the .dpi you
    need a different application.

    Information about resizing...
    Right-click on one or more selected inches... Choose... "Resize" in the menu.
    Choose a format, access a folder to save in the left click the ' resize and
    Save "button. (I suggest that you save the photos resized in a new folder
    to prevent the replacement (replacement) the originals)

    Take a look at the following link:

    Resizing Photos in Windows Live Photo Gallery
    http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

    In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
    and go... Image / information. Enter the resolution you want in the resolution
    fields and on the left, click change. Then go to... File / save as... and save
    your photo altered with a new name.

    IrfanView
    http://www.software.com/IrfanView
    (Download plugins too)
    http://www.software.com/IrfanView-plugin

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I did a rescue and recovery operation on my lenovo windows vista. I should not have done it, but it has been suggested. Now, I've lost some files including pictureswaone in February 2011. can I get it back?

    I did an operation rescue and recovery on my computer lenovo laptop windows vista now I lost files that have been added since February, 2011. photo for most. the rest were not important. I do not use my computer for business, just to download my pictures from the digital camera, games, connect to the who's who. and so on. is there a way to recover my files? I shouldn't have had to do a r and r, but it has been suggested by a "retarded"! now, I'm sorry, that I listened to. can someone help me?

    It of a longshot, but try this: http://www.filehippo.com/download_recuva/

  • How to get my serial number for Acrobat DC std to install? I have only the number of contract!

    How to get my serial number for Acrobat DC std to install? I have only the number of contract!

    Hello

    You can find serial number here sign in French - Adobe ID . Please make sure you sign in with your Adobe under which you purchased Adobe Acrobat DC Standard ID.

    See this KB doc for help: find the serial number of your product Adobe quickly

    Let us know if you need help.

    Kind regards

    Meenakshi

Maybe you are looking for