I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

Similar Questions

• My serial number that has been given does not work for the installation of the program of the premier adobe elements.  What should I do?

  The serial number that gave me to install Adobe Premier elements 14 does not work.  How can I get a serial number of work in order to proceed with the installation of a program that I already paid for.  I can't get anyone on the phone with Adobe to help me.

  Error "serial number is not valid for this product". Creative Suite

  Select a topic and then I STILL NEED HELP to start the first elements online chat

  -http://helpx.adobe.com/contact.html?step=PRE

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.

• I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now my Photoshop does not start and gives me a messa

  I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @

  You must click on this link 150:30 blue and start with message 11.

  Don't forget to leave a space after sudo python before submitting the script.

  Remember that you will not see your password when you enter it when calling to make.

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• After that restart of firefox does not start. is running in the Task Manager, but won't pop up. Reset safe mode and uninstall/reinstall won't help. OK so no reset.

  Win7 Pro. has worked ok firefox. but lately with 25 and 26 now, firefox does not start. I see that firefox is running in the Task Manager. but it will not just appear.
  If I still download and install it, it runs, but every time I restarted the system, it just does not work yet.
  Reset try:, safe mode, uninstall & reinstall, new/clean profile none of these work.

  
  

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

• RH2015, when using CBT to publish a subset of a research project is still the content that has been marked to not publish.

  Hi all

  I'm curious as to whether it is "By Design" or something I do...?   I have a project that is a thorough Administrator's guide.  I used the conditional tags build to block most of the administrator and Support information (server names, data graphics APIs etc.) to create a guide to the user of the application: the GUI and behavior of the app is covered with information from the back-end.

  I can publish this project to its own set of folders (Pathed \\server\share\RH_Projects\UserGuideas opposed to \\server\share\RH_Projects\AdminGuide...) when I publish and put conditional compilation and it seems to work.  The table of contents are correct and the additional information and topics do not arise in the project.  However, if I get a name of the API or a name server it pulls up the subjects that have been tagged to NOT be included in the compilation.  I see the UserGuide records research topics that I didn't when building are always moved to the output folder and wonder if there is a way to exclude these subjects for publication in the book of records?

  It seems that the problem was due to the fact that I imported a .docx file.  A theme contains a list historical revisions, graphic and table and he also had a copy of the Doc TOC.  It's questions. As the title of the document table of contents and table contents illustrations announces of and links to the content "excluded", to avoid breaking links to these topics, they have been added to the output files, but do not show up in the table of contents.  However they would be in the research because they were in the output files.

  But that didn't fix it 100%... (grrr...)

  Additional inspection (and more hair removed), I found that I had created a mapping file until I put on the information of conditional markup compilation.  Even after deletion (of the document) Table of contents and the aforementioned tables, some of the information which was to exclude was always put in the output files, was discoverable by search.  Once, I edited the map file and labeled or deleted sections links to the topics of "undesirable". I was able to get a clean build.

  So he did what I wanted now.

  NOTE: I had not created an Index or a Glossary for this project yet, but I'm sure they would have needed to be cleaned as well if I had taken the time to create them.

• R51 has black screen - does not start

  This question has been taken before, but I think I may have a unique situation.

  My R51 worked perfectly and was maintained during the 8 years that he was with me. I wanted to update my RAM and downloaded the update to the BIOS and chipset drivers updates.

  After that the tension I pulled the old 256 MB RAM sets under the keyboard and the bottom of the machine. Then I inserted the only 2 GB of RAM into its slot under the keyboard and reassembled it.

  Black screen / no start

  Went out the 2 GB replaced sets of 256 MB and it worked fine for a few hours that I looked for reasons why the 2 GB would not work.

  ' Sudenly the screen goes black and the closed system.

  It will supply (battery light / light green status), but the screen is black and it does not start. The fan is running and the battery costs.

  I tried hitting F12 and F8 but nothing.

  Then, I stored it down and pulled the chip near the connector of the screen and replaced by a spare part I had in hand... still nothing.

  From the CPU and replaced by another I had on hand - nothing new.

  I put all the oringinal gear back in place and tried to put pressure on the Board of Directors for the boot but still nothing.

  Help, please! I'm not very tech savvy but as you can see I'm not afraid to try.

  Thank you

  Thanks George!

  I was able to get the other 51 R spare parts and does the job!

  Send this message to him now.

  I want to send my thanks to all on this forum. It was the first time ever, I cracked the case on a laptop. Thanks to posts in these forums, I had confidence and information to see the job through.

  I have more no fear an attempt to repairs on the Thinkpad.

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• 10 Windows install does not start

  I went to upgrade to Windows 10, when the downloaded GWX-pse_ggl, I went to run it, and nothing happens. It does not say anything comes this window "Are you sure you want to run this program?", I say yes, and... Nothing. I did not dig a lot, and Yes, I tried as admin. I don't have the patience to solve Windows problems, not to mention the problems with Windows Windows.

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Reports of Oracle 11 g Universal install does not start

  Hello

  I try to install reports Oracle 11 g R2 (11.1.2.0.0) on a Win 7 64 bit desktop. I followed all the instructions for the installation begins with the installation of java jdk 7_45. The WLS server has been installed without any problem also (WLS1036_generic.jar for 64-bit). When I go in the folder of disk 1 of Oracle reports install files and click on Setup.exe, a command window opens with the following message:

  Claiming Universal Oracle install...

  Check the swap space: must be greater than 500 MB. Real 4962 MB passed

  Monitor: must be configured to display at least 256 colors greater than 256. 4294967296 real past

  Preparations for the launch of Oracle Universal Installer from C:\Windows\Temp\OraInstall112013-11-15_08-29-42AM. Please wait...

  The command window gets stuck here and no installation window is launched. Others followed the same process, but had an installation window open. Everyone knows about this issue or to know what measures to take in order to remedy?

  Thank you!

  Oracle Forms and reports 11.1.2.0.0 is not supported with Java JDK 7 according to the matrix certification Oracle Support: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls

  It's specific to a reason why you use version 11.1.2.0.0 more precisely? If you're looking for the latest version of reports and forms Oracle 11 GR 2 (if you are working with forms, reports, or both), exists in version 11.1.2.1.0, which is the latest version available and contains the latest patches to the patch. You can find the download at the Oracle's Web site: http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html

  You can use JDK with forms/States 11.1.2.1.0 7u45 because it is supported by Oracle Support certification matrix for 11.1.2.1.0: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls

  In addition, you can always use WebLogic 10.3.6 as it is supported with forms and 11.1.2.1.0 States.

  NOTE: When you start the setup.exe to install forms and reports 11 GR 2, I highly recommend right-click on setup.exe, then select "Run as Administrator". You must have administrator privileges to install the software.

  Thank you

  Scott (PITS)

• TE2300 XP install does not start?

  Hello world

  I'm trying to reinstall XP on a TE2300 (PT230A-00297) for a friend and met problems to make the installation of Win XP to start disc.

  I put a new HARD drive in there and the BIOS boot sequence is set correctly, but the system does not always start from the DVD drive, it seems to ignore that and moves directly to the LAN boot that is next on the list, to be on the HARD drive which is of course not formatted at this stage.

  I have an older HARD drive which is on the point of death, who already has XP on it and when it is installed in the machine everything works well and allowed me to confirm that the DVD player works correctly.

  Ideas, why the system does not boot to the CD/DVD?

  Any ideas how I can start an installation if I can't boot from the CD/DVD?

  Thank you kindly!
  Geoff

  It will be interesting to have more info on this new HARD drive.
  When you start your laptop try press the C key. This will force the optical disc drive to start as first boot device.

• My games installed does not start!

  Hello! I'm a fan of hidden object game and these types of games are as a source of food for me! I bought several plates to games in the past and that they still work very well, but all the new have! I get a message saying "blah blah blah has stopped working" on all new games installed hod. I did a check complete the drive, clean disk, I have no idea what's happened, someone said maybe a file association has been changed or something! I did a restore and it doesn't work anymore! These programs are not very large size that my pc should have no problem opening the app and go! BUT IT THE FACT! Help, please! IM cracking up missing my HOD games!

  Hello Jools75,

  Thank you for choosing Microsoft answers forum for windows vista.

  Tell us where you download games from as well as the names of the games?

  Are you overclocking your system?

  I suggest you follow the instructions below to run a SFC scan:
   
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow
  4. you should see messages on the screen the following:
  From the analysis of the system. This process will take time.
  Start of the phase of verification of the scanning system.
  % Of verification complete.
  5. once the analysis is complete, you will receive an on-screen message that resembles one of the following conditions:
  not found any breach of integrity
  corruption found repaired but it
  found corruption that he couldn't fix
  6 Please answer with the completion message you received.
   
  Kind regards

  Savan - Microsoft technical support.

• Download a trial of Photoshop Elements Mac - download/install does not start

  I tried to download Adobe PhotoShop elements 11 trial on my iMac 27 (osx Mountain Lion). All was well with the requirement of "Download Assistant", but the installation of effective enforcement is not started.

  Are there problems with the operating system? This program looks amazing, but, as a recent PC fugitive, I would try it.

  Suggestions please.

  Try to download PES 11 using the Direct download link and install.

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm