I installed VMware ESXi on my Cisco's UCS server but after that I don't get from CIMC.

Similar Questions

• To install Vmware Esxi 4 on PowerEdge 2800

  Hello. I have a PowerEdge 2800. I wanted to install Esxi 4.

  I download the OM_6.5.0_SMTD_A0.iso and the server starts on the DVD. When I choose install Vmware Esxi 4.0, it asks me to insert the CD / DVD with. But when I insert the DVD the Vmware I download refuses to recognize. Please help me solve the problem. I even tried to install windows server 2008, he refuses.

  Tank you.

  I saw the solution.

  I was supposed to download "VMware-VMvisor-install". Dell_Customized.ISO' to 'http://ftp.dell.com/esg%20solutions/ '.

  Tank you.

• Install VMware ESXi 5.5 on IBM x 3650 7979

  Hello

  I want to install VMware ESXI 5.5 on my IBM x 3650 what ESXI 7979 server but I get the following error

  "VMware ESXi requires the Execute Disable / No. Execute CPU of fiction to be activated.

  How can I solve it?

  

  I already found.

  You must enter the BIOS and the ability to set the "Disable bit" CPU = True

  Unfortunately, it seems that this server is not supported.

• Install VMware ESXi - 5.1.0 - Update1 error workstation 10

  Hello

  I want your help guys

  I have laptop Dell i7 with 8 GB of ram

  I need to install VMware-ESXi server

  first I install vmware workstation 10 and then I start the iso file

  but this obvious error

  < validate_host_hw_error: vender vib for hp, but host vmware, Inc. >

  How do I solve the problem

  Looks like you are using a (HP) custom vSphere ESXi installation ISO. Replace with one (not customized) directly from VMWare.

  More information, also found here: nested ESXi & #8211; VALIDATE_HOST_HW ERROR: provider VIB for HP, but host VMware, Inc..

• How to install VMWare ESXi on HP integrity rx Server 6600

  I have a VMware-VMvisor-Installer - 5.1.0.update01 - 1065491.x86_64.iso and I have installed successfully on IBM system x 3650 M3.

  But I can not install the HP integrity rx Server 6600 (hp integrity rx 6600 64-bit server, processor intel Itanium 2 1.6 Ghz core).

  Please teach me how to install VMWare ESXi on HP integrity rx Server 6600

  Thank you.

  Hello

  You cannot use ESX / ESXi on Itanium.

  Take a look at these...

  https://communities.VMware.com/message/1491338

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00773159-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3257036&ac.admitted=1379566669455.876444892.199480143

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• I installed Photoshop and Lightroom CC programs by creative cloud, but after 30 days expired programs. The payment is in discount on my credit card. I can't open these programs because I can't open the program because Adobe application results

  I installed Photoshop and Lightroom CC programs by creative cloud, but after 30 days expired programs. The payment is in discount on my credit card. I can't open these programs because Adobe ask activation or the code number.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• How to install vmware esxi 5.5 on ucs220 M3

  Hi Member,.

  I have this in my lab

  UCS 220 M3 with hardward raid:

  CISCO UCS RAID SAS 2008 M - 8i: PID UCSC-RAID-MZ-C220

  Mezzanine

  4 internal

  NO.

  0, 1, 1E, 10

  4 discs: 1 mini SAS (UCSC-3)

  I'm trying to install VMWARE ESXi5.5 on it, while installation work perfectly fine, but the server could not start from where vmware is installed.

  Any help will be appreciated on how to go about the installation and the creation of a part of the bios initialization.

  Thank you

  When you press F6, you see the RAID controller that is listed as a boot option?

  Can we go to the MMIC BIOS configuration, Advanced tab and check the Option ROM (OPROM) this controller is activated?

  So useful, please note

  -Kenny

• Just installed vmware ESXi 4.0.0.  Also have Workstation 6.5 I have a few questions here...

  Good day, I am new and vmware esxi virtualization in general...

  I installed the server esxi 4.0. and I want to welcome a few virtual machines on this server. I tried the ViCLient and really like it. But this customer is a 60 day trial and it costs $ 1,000 per license, if I understand correctly...

  I also have the Vmware workstation 6.5 software.

  My main goal for this is to be able to import and export on the esxi virtual machines, create snapshots, export these snapshots, etc... I'm not too familiar with Workstation 6.5 so, but so far, it does the job in terms of export and imprting vms from the ESXi. But I would like to be able to browse the data store, create virtual machines on the esxi without having to create them locally AND export to ESXi...

  I would like to be able to create, manage, copy, create and import/export snapshots, to/from the esxi, but I guess you can't do all this using VmWare Workstation? I would buy the Vsphere CLient, but I'm not one who has a hand on the budget of COMPUTING...

  When you access download ESXi you license number appears near the top of the page. Enter this number in the Configuration tab under license vSphere client.

• Install VMware ESXI 5.1: GROUP with no error reported

  Hey everybody,

  We are trying to install VMware on a server which seems full fill all the requirements of the material.

  We have tried both a CD and a USB key (who both successful install VMware on another server)

  and we had this problem:

  A few seconds after that, we started from the Flash DRIVE or the CD, we get a simple screen purple

  with absolutely no message and no error reported. Then, if we expect more, we get a black screen with a few

  green squares arranged randomly all over the screen.

  If someone who had the same problem could help us or if anyone has an idea on how

  to get some kind of error there reports, it would be very apreciated!

  Thx for your time and your consideration buddies.

  Please tell us what the hardware. Also please download and apply the latest firmware available for this material to the web site of the manufacturer. I had the exact same problem with my HP DL360 Gen7 and I applied the last Pack of Proliant HP who has paid the GROUP for me.

• Need help to install Vmware ESXi and ESX 4.1 under VM in VMworkstation 7

  I get an error when trying to install 4.1 ESX and ESXi 4.1 as a VM under VMWorkstation 7.1 running on Windows 7 32 bit AMD Phenom 9500 Quad Core 2.2 ghz with 3gig memory.

  "Any level of support for the microcode for the stepping of the processor of AMD family 10 h B2.

  can some one guide what to do to work around this problem.

  Thank you

  the article below

  http://KB.VMware.com/kb/1013334

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• Cannot install VMware ESXi 4.0 on RAID1

  Hi all,

  I have a Dell optiplex 755 with 2 sata hard drives configured as RAID1 from the BIOS (hardware RAID). Ask VMware for a funny reason when installing, select a hard drive where to put all the files. The problem is that it asks me to choose from 2 hard drives instead of display a hard drive (RAID 1).

  I tried to select at least one of them as well as the installation continued normally, but when I reboot the PC machine don't specify "no operating system found".

  I also remove the RAID and tried the same setup. It worked smoothly until the end and of course even when I rebooted, it worked.

  Can someone give me advice I can do to allow hardware RAID VMware?

  Thank you

  Yes the RAID could be easy to set up - but not all RAID controllers are supported by VMware (so see you two discs instead of one, trying to install ESXi).

  The link I sent you before can be used to determine the hardware supported, etc.

• Problem installing VMWare ESXi on PowerEdge 1950

  Hi - I am trying to install ESXi on a PE1950, with a disk 2 RAID 1, PERC 5i controller config, but when starting ESXi image I get the following error:

  "Could not find a device suppored to write the ESX Server 3i 3.5.0 image '"

  I tried to get this error with little joy.  This server was not pre-ordered with ESXi embedded - that is the problem?

  However elsewhere that I've seen posts where people have installed ESXi on older models of PE successfully.

  Thanks in advance

  Phil

  
  

• When you try to install 6.0.2 a "Run As" prompt appears, but after I select running as my current account (which has administrator privileges and still is able to remove and install other programs [checked]) nothing happens.

  Firefox does not seem to recognize that my account has administrative privileges on my computer. I tried to create another account with administrator privileges and it was also impossible to install Firefox.

  I also had the same problem...

  Right-click the installer and select "run as Administrator"
  It works very well...
  If you have a problem...

• I installed Virtual PC with XP Mode on Windows 7 but I can't access the network from XP Mode.

  Network with virtual xp problem

  I installed virtual xp on Windows 7. but I can't access the virtual xp network. My LAN card manufacturer is realtek but virtual xp Device Manager indicates a intel NIC

  First, know what kind of NIC with your computer:

  1. click on Start > Control Panel > System > Device Manager .
  2. double-click on network adapters .

  Then, adjust the virtual machine:

  1. click on Start > all programs > Windows Virtual PC .
  2. right click Windows XP Mode and click settings .
  3. click on the network .
  4. Select the network card in the computer in the menu 1 adapter on the right side of the window.
  5. click on OK .