I installed Windows XP Home Edition. Can not find the wireless network drive

I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

I was just wondering how can I get rid of this?

Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

Put on your router and wait for the normal light distribution. Then turn on all devices.

I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

Your router's wireless network is secure? Ideally with WPA2 encryption?

Tricky

Tags: Windows

Similar Questions

  • can not find the wireless network

    Hello

    I hope someone can help. Today, I got a new installed wireless router. Until now my main and most recent computer can connect to the internet fine (so I know this isn't a network problem), but my old computer does not find the network when scherching of available networks, it may pick up other networks and communicate with them simply not my own. It is the first time that I am trying to connect to this wireless computer.

    The computer is a HP pavilion t770.uk Windows xp sp3.

    You need to replace the network adapter. The current NIC is older than the specification of N, so it can not communicate with this Protocol.

    You can try to configure your router and the new pc to use b, if they allow.

  • HP Pavilion g6-1310ea: can not find the ethernet controller driver

    I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

    Hello:

    I can't even to the driver page.

    Here are the drivers you must however...

    Ethernet controller: download and install the 2nd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

    PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

    SMBus Controller: This is not on the driver page even if it worked...

    I zipped and attached to the driver that you are interested in below.

    Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

    Go to Device Manager and click the controller smbus who need the pilot.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.

    Then restart the PC.

  • Windows XP Home Edition do not recognize the validation key

    I'm abroad and currently helping an exchange student colleagues with his laptop before riddled of virus. To know that she was about 6 years without a reinstallation of the machine running, I went ahead and did. Since then, I was unable to activate their copy of Windows XP Home Edition (receive the incorrect product key error) despite the verification on his Toshiba Satellite A105-S361 code. What would be my next step to get this posted thing?

    License types must match.  Chances are that the license code on the Toshiba is an OEM license key.  It validates that if Windows XP has been installed from an OEM Windows XP Edition Setup disk family.  If you tried to install Windows by using an XP retail installation disk, types of licenses will not match, and you will get an error similar to the one you describe.  At this point, if you do not have a Toshiba Windows Installer disk or if there is not a recovery partition still on the hard drive (accessible by pressing a button as soon as the monitor is active), you will need to contact Toshiba for more help/support.

    HTH,
    JW

  • Vista Home Premium can not find applications and networks.

    Vista Home Premium (manuf. installed) can not find applications (application to go to define associations in control panels?), does not recognize my wireless network and available restore points are only for dates after the problem has occurred.  If I buy a Home Premium DVD and do a clean install should I expect to get a working computer?

    Hello

    You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
    totally your data off the drive of backup, and you need to reinstall your programs. If you do not
    Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
    Then you can make a complete new installation - just select the format options that erases the entire disc (this
    Clears all data as well).

    Some system manufacturers use Partitions recovery and other methods to allow you to go back to a
    completely new facility. So check with your system manufacturer to see what options you must do
    - and it's certainly doable - just a question of the process the manufacturer of the system set in place to
    you.

    What are the system recovery options in Windows Vista?
    http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

    This tells you how to access the System Recovery Options and/or Vista disk (some manufacturer have other methods)
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    -----------------------------------------------------------------

    How to perform a repair for Vista Installation (this keeps your data if the backup off the)
    Player is safe)
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    This tells you how to access the System Recovery Options and/or Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
    http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

    How to do a Custom Installation of Vista - this is a clean install should, however, save your data
    http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

    Upgrade to another edition of Windows Vista - this should keep the programs and data
    http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

    Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
    http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • HP MIni 210-2145 DX: clean install of Windows 7, now I can't find the wireless drivers that work.

    I have a HP mini 210-2145 DX.  I recently had to do a clean install of Windows Ultimate edition.  Now, I can get a wireless connection because I can't find the right drivers on the HP site.  I tried 12 + drivers that I downloaded.  They all seem to be for 32 bits, and it's 64-bit.

    Can someone please help me find the right wireless drivers to install?  Thank you.

    Try this different file and see if it works automatically and installs the driver.

    File name: sp57965.exe

    There was also support for the hardware ID you have posted.

    I have no problem downloading the file, or by using 7 - zip to extract the exe file downloaded to a folder that you can browse from the network controller to install the drivers.

    Unfortunately, I can't help you with the problem if the new file does not work.

  • Wireless laptop can not find the wireless Officejet 6700 printer

    My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

    If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

  • Printer HP Officejet 6100 (h611a) can not find the WiFi network

    My printer HP Officejet 6100 has recently lost its eprint connection and would not reconnect.  I asked for help and told

    try to use an IP address manually.  I tried this according to the instructions provided to me for the manual IP address, subnet mask and so on.  I selected apply.

    The restarted printer and now the printer cannot be found or will not connect to my

    wireless network.

    I tried to power on the printer, the modem and the router so that it would reset but the printer would not still find or connect to the wireless network.  The little blue light on the printer for wireless connection just continues to blink.

    Because it connects to the wireless network I can not go back in the server web part to cancel the IP address manually and other changes.

    Is there a way I can reset this?  Or get my printer to connect to the wireless network.

    Steve

    Hi scthom,

    Welcome to the Forums of HP Support! I see your HP Officejet 6100 has recently lost its connection ePrint, and now, you are not able to get connected to your wireless home network. I would like you to follow the steps below:

    Please start here: convert from a connected printer USB wireless

    You are now connected to your wireless network? Please let me know the results, I'll watch for your reply.

    Thank you

  • I can't find the wireless network

    When I open him "set up a connection or network" and go to "connect to the Internet. It shows this:

    I can not find wireless... someone can help?

    Hello

    Open the start menu, then click on to connect to... and then when the window opens, click on the name of your network and click on connect. Type your WPA2 security code if necessary.

  • Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

    Hello

    This is my setup
    Computer: Satellite Pro 4600 model ps460e 02hyt en
    Operating system: Windows XP SP3
    Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

    My problem:
    The operating system has been improved in win 98se to windows XP SP3.
    The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
    Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

    Please I wait your help

    Thank you

    [email protected]

    I imagine that it will be compatible with SP2 well. You can test it please and post the result?

  • Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card

    Hi all!

    I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...

    There are so many different drives, I tried, but no one has changed the situation...
    Anyone has any advice?

    Thanks in advance,

    ciroopi

    Well, I found the solution to the problem! :)

    so, I write these verses down for anyone who might know the same problems:

    as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
    as he [I jumped no useful installation programs]

    I advice restart you each time you install a component, in order to have under control the whole Exchange.

    1 Windows XP Service Pack2 (RTM) - of course ;) -.
    [...]
    DirectX V9.0c 5 (SP2)
    Windows Media Player 10 V10.00.00.4036 6
    [...]
    10 Microsoft .NET Framework V1.1.4322 (SR1)
    11 Sun Java 2 Runtime Environment V1.6.0
    12 Intel ICH8M Chipset utility V8.2.0.1014
    13 Intel VGA driver 6.14.10.4833 965GM

    Note that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
    You may have read in the installation dialog box.

    Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.

    at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.

    14 Realtek ALC268 Audio Driver V5.10.0.5433

    for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.

    then restart.

    for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].

    Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
    It should reinstall the kbfix and install the new drivers.

    Reset.

    After the reboot, nothing happens, but...

    .. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
    If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".

    After that, XP automatically detects ALL audio devices and install the correct drivers.
    In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.

    So, hope this helps!

    See you soon,.

    Francesco

  • Low volume after installing several different drivers. Can not find the original driver to reverse the effects

    Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

    Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

    Any advice would really be welcome

    Hi @kendrat0,

    Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

    If I understand correctly the audio quality is lower than expected and need a solution.

    (Correct me if I'm wrong, and I thank you for the details)

    Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

    I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

    Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

    Perform a hard reset

    * Reset the BIOS default

    * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

    * Update the BIOS

    * Reset your computer

    Perform a recovery of the HP system

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

    If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
    If you like my assistance, please click on the thumbs up icon.
    The two icons are below this post.

    Kind regards

  • Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a

    I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet.  However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a.  If I click on devices and printers, it shows my device from the computer as requiring troubleshooting.  When I click on troubleshooting it signals that "Driver for Photosmart Prem 310 is not installed.  Install the latest version of the driver.  When I applied the fix, it indicates that the driver is not found.

    I tried to download the latest driver on the website of HP in various ways, finally to uninstall all HP software displayed in the Panel and then removing all the HP files remaining on my laptop.  I then ran PC Tools Registry Mechanic, disabled my anti-virus, restarted the computer software and reinstalled the complete C310a software on the HP site.  It ended without any problem, and after adding the printer to my list of printer, it is printed on a perfect test page.  However, Device Manager always reports the C310a driver is missing, but it cannot find a copy when it finds one.

    How can I convince the device manager that everything is going well (apparently)?

    apeace, I recommend you do as you did, uninstall the printer under programs and features but also by ensuring that this printer he is removed from the Manager of peripherals and devices and printers. Then after restarting the computer and by disabling the firewall, download the drivers and software for full adjustment and install them.

    You can also run this utility and see if that solves the problem automatically!

    http://goo.GL/u3jDE

    Let me know!

  • Photosmart 8250 works on Windows 7 comp., but can not find the box tool

    Hello

    I have a Photosmart 8250 installed on a Windows 7 computer.  The printer works well and I know now that the HP Solution Center is no longer available for Win 7 so no Toolbox is available here.   However, HPs link called "What Happened HP Solution Center in Windows 7" it is supposed to be a workaround which indicates the Toolbox should available in the Presentation/Services tab in properties or preferences, etc.

    My problem is that on my set up when I go into the properties or preferences, I can't tab called features, Services or Toolbox.

    Any body got any ideas how I can get the features or Toolbox appears in Windows 7.  Any ideas would be appreciated.

    Thanks in advance.

    grw385

    Hi @grw385

    It is there no Solution Center or the Toolbox for your printer under Windows 7. What happened to the Toolbox in Windows 7 HP?

    Installation of the printer software in Windows 7 for a USB cable connection Introduction

    The link above may be useful.

  • can not get the wireless network... saying "windows could not find a certificate to log in to a network.

    Hello

    I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

    Thank you

    Hello

    I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

    Thank you

    Thanks for posting. Follow the instructions below carefully.

    1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
    2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
    3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
    4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.

Maybe you are looking for