I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

Similar Questions

• Creative cloud is defective. You try to start the trial of photographers.

  You try to start the trial of photographers. I have PS CS6 and Lightroom installed 6. When I download LR CC and try to open, it opens old LR6. Try to open PS CC and he said: the files are damaged or missing, try reinstalling. I tried several times. I tried to uninstall creative cloud, but he says apps on my computer in need! And you can also read my 7 day trial began.

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• You try to start the process J000 has expired. Please advice

  Dear team,
  
  I get lines in my .ora alert log file, and users report that they were not able to connect the database for three hours,
  
  
  
  
  Completed: alter database backup controlfile to trace
  Wed Jul 18 20:06:22 2012
  Beginning log switch checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Wed Jul 18 20:06:22 2012
  Arc1: Evaluating archive log 2 thread 1 sequence 17288
  Arc1: Begins to archive log 2 thread 1 sequence 17288
  Creating destination LOG_ARCHIVE_DEST_1 archives: ' / ora_drplive/arch/drplive/1_17288.arc'
  Wed Jul 18 20:06:22 2012
  Thread 1 Advanced to record the sequence 17289
  Currently Journal # 3 seq # 17289 mem # 0: /ora_drplive/log/drplive/redo03.log
  Currently Journal # 3 seq # 17289 mem # 1: /ora_drplive/logmirror/drplive/redo03.log
  Wed Jul 18 20:06:22 2012
  Arc1: Archiving newspaper wire 2 1 sequence complete 17288
  Wed Jul 18 20:37:15 2012
  Filled checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Thu Jul 19 04:36:08 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:38:15 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:40:21 2012
  
  
  
  
  I checked some view as
  
  
  SQL > select * from v$ resource_limit;
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
  ------------------------------ ------------------- --------------- ---------- ----------
  process of 49 50 50 50
  51 59 60 60 sessions
  10 20 810 810 enqueue_locks
  10 75 8000 UNLIMITED enqueue_resources
  ges_procs 0 0 0 0
  ges_ress 0 0 0 UNLIMITED
  ges_locks 0 0 0 UNLIMITED
  ges_cache_ress 0 0 0 UNLIMITED
  ges_reg_msgs 0 0 0 UNLIMITED
  ges_big_msgs 0 0 0 UNLIMITED
  ges_rsv_msgs 0 0 0 0
  
  
  SQL > show parameter JOB_QUEUE_PROCESSES
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  JOB_QUEUE_PROCESSES integer 10
  
  
  
  Please sometimes what to check, how to solve this problem, because it comes every night, full backup also arrive and script to archive clean also run during the night.

  YM says:
  Uh,.
  I'm sorry Osama I don't see your answer. Excuse me...

  No problem.

• I get the "Year Error Occurred" message when you try to start the YouTube app on my new Bravia

  Hello

  My KDL50W800C has an internet connection but when I try to start the YouTube app, I get the message 'year Error Occurred. " Not to be confused with a network error has occurred. It says no network.

  Help is greatly appreciated.

  Can't tell from your model number, but if it is an Android TV, try to erase the data on the app:

  Home > settings > Apps > system apps. Search YouTube from the list, select it, select erase data and confirm.

  Restart (just to clear any other issue) - now power press Remote button and try again the YouTube app.

• Errors when you try to start the listener HTTP (Oracle Developer Suite 10 g)

  Good day everyone,
  
  I'm doing some development on certain forms in Oracle Forms Developer 10 g and I have problems creating a local development environment. When I try to run a form in Oracle Forms Developer 10g, I get an error message telling me that my HTTP listener cannot be found. When I try to run my HTTP listener, I get two error messages:
  
  The server initialization error: error reading system i/o
  Fatal error: outgoing server
  
  Could someone help me with the configuration of my local development environment? I need the environment so I can use debugging tools in Oracle Forms Developer 10 g (currently I deploy the form in the development environment and trouble shooting problems I have).

  Take a look at forms: how to configure Forms Builder to run forms locally. After you set up your system, then you will need start the OC4J instance before you can run your form.

  Craig...

  Published by: Silvere on April 17, 2012 12:16

• I went to downloads of Firefox Sync to Sync onto my second computer and it says that the author withdrew from the add-on for 3.5/3.6. Now what should I do?

  I went to sync using Firefox and clicked on "part 2: connect to your other computer...» ». The first step is to click the 'Firefox Sync download page' I did. It took me to the Extensions/firefox Sync for Firefox 3.5/3.6. The message says that the author has removed this add-on.

  How can I add my second computer now?

  Thank you
  Jack

  Install Firefox 9.0.1 if you want to use Firefox Sync, which is integrated into versions of Firefox 4 +.

• Error 5 when you try to start the Windows Installer service

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  My windows installer does not work so I went to go and start it I just got "error 5 access denied". Then I went to start another service to see if it was my computer or if it was just Windows Installer and it worked. I tried to go here (http://support.microsoft.com/kb/943996) and everything he does, but he did nothing. I tried to run hard but he gave me "80072F8F" error code and I didn't spend time fixing something that might fix something.

  I tried to go to regedit.exe and did all what is written on http://support.microsoft.com/kb/943996, but nothing worked!
  Help, please!
  I run Windows7 64-bit Home Premium edition

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• You try to start the process manager in a new installation

  Version 11.2.1.0.3
  Platform: RHEL 5.4
  
  To configure the Manager process in a machine (which will be a target server), I downloaded GG delivery Setup.
  The installable unpacked to the desired location. Then I created a basis for the manager parameter file and tried to start the process manager. But the process manager is not coming.
  
  That's what I've done so now after installing GG (by installation, I hear the shearing and Untarring)
  
  1 set the env for the database variables
  
  2. created settings for the Manager as shown below.
  

  $ ./ggsci
  
  Oracle GoldenGate Command Interpreter for Oracle
  Version 11.2.1.0.3 14400833 OGGCORE_11.2.1.0.3_PLATFORMS_120823.1258_FBO
  Linux, x64, 64bit (optimized), Oracle 11g on Aug 23 2012 20:20:21
  
  Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
  
  
  
  GGSCI (stryker179) 1> info mgr
  
  Manager is DOWN!
  
  GGSCI (stryker179) 4> view param mgr
  
  port 7809
  purgeoldextracts /u04/ggData/dirdat/MS/*, usecheckpoints
  dynamicportlist 7840-7849
  
  
  GGSCI (stryker179) 2> start mgr
  
  Manager started.
  
  
  GGSCI (stryker179) 3> info mgr
  
  Manager is DOWN!

  I have not created any gguser at the DB level. But this is not a sine qua non for process manager. Right?
  
  
  -Regarding the logging of errors of GG
  
  Wish I could check some logs to see what is causing this problem?
  
  Where are the logs (.rpt files) stored? I believe that we must manually create a directory called dirrpt.
  The new facility, the dirrpt directory was created for, not. Only the following directories were found after the installation (détarer)
  

  $ ls -alrdFt * | grep /
  drwxr-x--- 7 oracle oinstall      4096 Aug 24 07:06 UserExitExamples/
  drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 cfg/
  drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 dirprm/
  drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 dirjar/

  Hello

  1. do you run CREATE subfolders in GGSCI prompt?

  It will create all the folders required such as dirprm, dirrpt, dirdef, dirsql, dirdat... etc.

  DB user level is not necessary for the process of the Boot Manager, but you must create the Bishop under the dirprm folder settings file, to do this you need to run,

  GGSCI > EDIT PARAMS MGR

  in this reference to file the PORT number, it will be generally 7809 ex, PORT 7809,

  Then start the mgr in GGSCI

  GGSCI > MGR START

  Yet once if you get the MESSAGE MANAGER, view the details in the ggserr.log file that is available in the GG base directory where you unpacked the binary files.

  I hope this will help you
  Annamalai.

• Upgrades to 8 and restarted Firefox but when you try to start the message get FF this restart is required to complete installation; same message if I try to re - install or uninstall and seq. wrote this using Google Chrome.

  Upgrade to 8 FF (of 3.6) seem to go smoothly, as did restart on Acer desktop running Windows 7 Home Premium. But I get "reboot needed to complete the installation of FF" whenever I try to start and seq. tried uninstalling FF using the uninstall from the control panel and uninstall in my Mozilla folder - get the same message "Restart required". Tried to reinstall FF - same message. In short, totally unusable FF - and I'm starting to like Google Chrome.

  Please see:

    http://kb.mozillazine.org/Software_Update (Software Update not working properly)
  

  Delete the files:

  C:\Users\ < user > \AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates (Firefox %LOCALAPPDATA%\Mozilla\Firefox\Mozilla)

  (Above is a windows installation - an installation Mac stores its files in /Applications/Firefox.app)
  
  To open one of these folders in OS x, Ctrl-click and select to display the contents of the package. )

  Download a new copy of Firefox for the installation.

  Uninstall your current version of Firefox before installing, but do not remove your profile data when you uninstall Firefox (do not select delete data of a personal nature) or you will lose your bookmarks and other data in the profile folder. Remove the Firefox program folder as well.

  Do a clean reinstall as an administrator. See:

  http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  For more information on your profile folder, see profile management and:

    http://kb.mozillazine.org/Profile_folder_-_Firefox
    http://kb.mozillazine.org/Profile_backup
  

  Please let us know how you fare.

  revised to indicate the difference in path on Windows

• 0xd0000022:0xd0000022 error code when you try to start the software Liscensing service

  I installed Vista Home Premium on my system there is no problem. Activated and it worked very well. A few days ago arrested updates installation error 0 x 80070426. According to Microsoft Answers, I tried to restart the service 'Software Liscensing' for some reason any that he had stopped. When the service tries to start, I get error code 0xd0000022:0xd0000022 and the service is not started. Help, please. I have a copy genuine Windows Vista Home Premium and the original product key.

  Please repost your request in Forum Windows Vista Validation issues .  Thank you!

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

• Error: 6 when you try to start the PS CS5.1 after reset of the HD

  The error message also tells me to reinstall the application.

  I downloaded the software from Adobe.com

  At the opening of the dmg I get a regular disk for Adobe Photoshop CS5\ image

  Trying to go ahead and click on the setup I get this message

  

  any help, please?

  Moving to download, installation, setting up

• Error 6 - the handle is invalid when you try to start the services.

  Error 6 - the handle is invalid

  HII
  I really need help
  If you sat down me - it would be great.
  in my organzition - 5 different computers - all THE of THEM with the HELP of Win Xp Sp3
   
  started having error - error 6 - the handle is invalid
  When we want to start very imporatnt services
  print spooler
  the Windows Installer
  EXC
  When we try to start these service - we get the error - thT THE HANDLE IS INVALID - ERROR 6
  and the service - was able to start

  10 x in advance

  Thank you very much
  We have made the controls more
  is it was the fault of the Anti Virus
  We always face the problem - but we know who is to blame
  We use the endpoint of Symantec Enterprise solution
  When we disabled anti virus service - other services began to operate properly

  We contacted Symantec support to see if they have a solution to the problem
  really 10 X