I just can't get my Airport time capsule on the internet.

I bought an airport Time Capsule and a MacBook Air, have set up their, I access my files inside the airport TC, but I can't access the Web, away from home.

What should I do?

It is necessary to have a Mac at home connected to access?

Setup using Airport utility it does not appear to me the ability to access over WAN. How can I do?

I already configured the back to my mac option.

Can someone help me?

Please take a look at the following airport user tip for, at least, three methods to access your Time Capsule from a remote location.

Tags: Wireless

Similar Questions

  • How can I connect my Airport time capsule to the nbn optus

    I just got the NBN Optus connected and time capsule doesn't seem to work, can anyone advice on how to connect. I connected to a modem (Sagem Fast 38640op) with cable but the mac does not expect a return to the top

    You should do a full factory reset on the TC...

    Repeat the installation... and it should work correctly in bridge and create a wireless network.

    The Sagemcom really poor wireless but you can leave it on... use it for your network wireless of comments.

    This is my normal configuration guide... but there are a few specific pieces to network problems with the operating system later as Yosemite or El Capo.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually.

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

    Let us know how you go.

  • Airport Time Capsule 2013 loses Internet connection

    Hello! Help, please! Bought a new airport Time Capsule 2013, hung, everything works well, but it several times a day, disconnect from the Internet. Saves only the reboot. It is very annoying ((the provider said it sees it's requests on a regular basis but does not correct. Apparently she must ask for options and more them do not ask, and she periodically asks for new, but do not correctly. It is for the USA, and I am in Ukraine. I have a wedding? (((((

    Apple routers can be very problematic on some connections... You use PPPOE with any kind of modem? Apple routers have proved to be unreliable with this setup for some people. In particular the fiber connections simply do not work very well.

    For you help, we need to know what kind of internet that you have and the modem... brand and model may not mean a lot but the actual type, is it a pure modem or a router? Or do you not need a router at all. If it is an installation of fiber you plug straight ethernet of ONTARIO at the time Capsule?

    The demands of love.

  • How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

    How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

    There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

    I don't understand what you're asking...

    If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

  • Purchased airport Time Capsule in the USA and the cord specifies 125V. I can hook it up to 220 V?

    Bought time Capsule airport in the United States

    power cord said 125v

    Can I use it on 220 V?

    K Dolega

    Yes, Time Capsule will work on 100-240 v and 50-60 Hz automatically.  So, you may need an adapter to plug the power cord into the wall outlet, but you don't need a voltage converter.

    Some channels of wireless 5 GHz no longer used in the United States are not legal in other parts of the world, so it may be wise to use the lower 5 GHz channels numbered to avoid any problems.

  • How can I get my computer to connect to the internet evey time that I boot it up without having to reset the network card?

    Whenever I start my computer I have to reset the network adapter or get new settings of IP so he can connect to the internet. When that I starts it connects to a LAN only.  I have cable internet. My modem works fine. I have Windows Vista and Internet Explorer 8.

    Hello

    See the following link, it worked for me. I'm sure that it will work for you as well.

    http://www.Vistax64.com/Vista-General/151727-connect-Internet-startup.html

  • Airport Time Capsule drops Wifi/Internet with 7.7.3

    I started having a lot of problems with my internet connection.   I have TWC with my own Motorola Modem connected to a running 7.7.3 TC firmware (about 14 months or two).    The internet continues to lose connectivity.   The lights on the modem are beautiful and the TC has constantly green.   But in the Airport utility, the modem (internet) is yellow.   My hard CAT5 connection from my computer has no internet.   All devices as the Apple TV4, iPhone and iPad are all connected wireless because I can connect to the computer for the movies on the hard drive of my computer... But no real internet connection.

    I called 6 times in the last week and it was recommended that I replace the modem... What I did.  Alas, no more than 24 hours later the same issue again.  TWC seems to think something is wrong with he TC... Is - this right, its connected to my devices, but not the modem for the internet?   I read something on the DNS servers and away provided TWC DSN servers.  Long time without activity and the TC loses the connection?

    Does anyone have any help here?   Everything about my new ATV4?

    Thank you

    I have TWC with my own Motorola Modem

    This modem do you have? What did you replace by? Need a real model number.

    The new TC there a lot of problems with some Motorola modems... but it is not easily reproducible. The fact that it ran ok for 14 and suddenly started having problems is also common... It seems they fall more often if this is the first day, and then after a year or two.

    I read something on the DNS servers and away provided TWC DSN servers.

    You can try using Google's DNS servers in the TC and see if that changes anything... or in the client and see if that fixes things... Any kind of test worth it... results negative are valid search... they offer a key to what is NOT the problem.

    Everything about my new ATV4?

    Again, it is simple trial and error... Give up ATV4 for a trial period. Simple as pie.

    Reset the TC factory and redo the installation.

    I recommend the following.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually.

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

    Let us know how you go.

  • Why can I add an airport Time Capsule not in the list of products under 'my profile to support?

    Apple allows to record your TCs Airport?

    The serial number has been entered correctly, and on all of my accounts of ID, I get the same error message appears. (see screenshot above)


    I am doing the impossible?

    Kind regards

    Apple do not consider the most convenient airport and more than one device... There is no direct applecare for it it's just like a keyboard or a mouse.

  • How can I move my old TIme Capsule at the new Time Capsule backup files?

    For five years, I use a 2 TB TC. It is also the main router wired into my local network.

    Have the new TC even router feautures?

    If I buy the new TC I would like to transfer the backup files stored in the current TC. Is this possible? How?

    Thank you very much for your support.

    Beppe53

    1. Yes.

    2. click here and follow the instructions.

    (144542)

  • Can I use Apple TV with airport Time Capsule 3 to 4

    Can I use Apple Airport Time Capsule 3 to with Apple TV 4 as available storage to stream my movies, etc.? I tried external hard drives but Apple TV will not read them.

    Not directly, it would have to be pointing at iTunes and listened to using home sharing

  • Airport Time Capsule HD access

    I have an AC of 802.11 airport Time Capsule 3 to, PartNumber: ME182LL/A, and I want to save my MacBook Air by Time Capsule app.

    In addition, I use it as an external hard drive, moving some files to the airport Time Capsule using the Finder.

    I use physical conection from my MacBook to the trough of Time Capsule a RJ45-USB converter.

    But I am extremelly experiencing a lot of time to access my files using the Finder.

    Do you have an idea how I can fix this connection?

    Do you have an idea how I can fix this connection?

    I guess that your Mac has a Thunderbolt port.

    Use a Thunderbolt for the Ethernet card.  It's up to 10 times faster than the USB adapter. Your actual speed will be 4 to 5 times faster than USB.

    Maid in Gigabit Ethernet Adapter - Apple

  • How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

    My time capsule airport works to my iMac and my Sony laptop win7.

    I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

    Help?

    Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

    Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

    However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

    Step 1. Check your network configuration.

    To check the settings of network configuration for the correct IP address information, you can do the following:

    • In the command prompt window, type ipconfig/alland then press ENTER.
    • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
    • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

    Step 2. Try to repair the connection.
    Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

    • Click Start, click Control Panel, and then double-click network connections.
    • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.
  • How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

    Hello

    How can implement you not with Time Capsule and AirPort their simulation on the iMac?

    I don't know what you're asking.

    AirPort Extreme is a wireless router.

    A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

    An iMac is a Mac computer.

    An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

  • Time machine can finish no backup on airport time capsule

    Time machine can finish no backup on airport time capsule.

    explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

    The network failed to halfway through the backup.

    To resolve this problem, we need to know your complete network type.

    This modem do you have? Brand and model please.

    Who is your ISP? It is important for the IPv6 configuration.

    What model is the TC?

    What the configuration of TC in the network?

    How old is the MBP? If you have an ethernet port that you use it instead of wireless?

    Is this a first backup? Or were you works well for awhile and it's broken now?

  • Time Machine (on Mac) does not detect the airport Time Capsule

    Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

    Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

    When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

    Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

    I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

    Any suggestions?

    Sierra has been problematic with the TC.

    1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

    2. make sure that you can actually write to disk of TC.

    Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

    Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

    3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

    4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

Maybe you are looking for

  • HP Pavilion Slimline s5623w: issue extra HD

    I want to add a hard disk in my wifes computer. I want to install SSD to manage the operating system and leave the mechanical drive as a storage unit. Is this possible with this computer?  If it's possible, can I any additional cableing. Thank you.

  • Toshiba 39L4333DG CloudTV: I do not understand! Guide needed

    Hello I've just set up my new TV, I think it's great (besides being too slow), but I do not understand how to use the CloudTV. My TV came with NO manuals: it included only a quick installation guide and a brief description of cloud TV.I was able to d

  • Cannot install BT STACK for VISTA

    Hello I just formatted my Satellite A200 1 MB (PSAE0E)I downloaded BLUETOOTH STCK of stack official BT page Toshiba for VISTA, but when I tried to install it, he showed me the following message: "The operating system is not sufficient for the executi

  • WCF with BasicHttpBinding

    Hello I want to use BasichttpBinding instead of WsHttpBinding, I need allow transferMode = "Streamed". so I changed from WsHttpBinding and BasichttpBinding place instead and mtom enbaled too. now, I am faced with a new problem. When I create the prox

  • Change the SUPERVISOR password in configuration of the ODI

    HelloI configured an agent in ODI 12 c with the help of a guide in the link below:http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_12c/odi12c_agent/odi12c_agent.html#overviewNow when J'execute./agent.sh-name = OracleDIAgent1-PORT