I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card
How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
I formatted my CF card already.
< re-titled by host >
If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.
In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.
Tags: Mac OS & System Software
Similar Questions
-
Have not analyzed the photos for a long time. When I did it before, I clicked on the icon for HP Deskjet and then was able to choose "Scan Doc or Photo". This option is no longer. Need help.
If you use windows 7, start menu open then choose "all programs" and find "windows fax and scan" and open > then go to the lower left choose scan and then in the main menu, choose "new scan".
or you can watch this videoscan a document or photo with windows fax and scan
"If your scanner is not connected or you have a problem with the driver is the message"
No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer, and then try again.
For more information about adding or troubleshooting scanners, see Help and Support
" -
I lost MY IPHONE NOTES on my computer after downloading itunes and remove the old DOWNLOAD that was corrupt. I'm going to search my NOTES in my file icloud I have prevoiusly had saved on my computer and he missed. Where at - it go? Can someone help me please?
Joy
Since both iCloud & iTunes are apple products, you need to communicate with them.
-
* Original title: Steve M.
I have My Documents on my Windows 7 desktop. When I click the icon, an icon My Documents Shortcut.link then appears next to the My Documents icon. When I right click on the shortcut icon, my screen started flickering and I mus do a Ctl/Alt/Delete to return to display system and monitor to normal.
I tried to remove the My Documents icon, but who only 'pretending' in the file recycle. Of course, I don't want to totally delete the My Documents!
Any advice will be appreciated.
Thank you.
Although it is strange that the location of your documents is
C:\Users\Steve\Doc
Instead of
C:\Users\Steve\Documents
This result shows that the "My Documents" icon on your desktop is a shortcut and not the actual file with your documents. The icon on your desktop has a blue arrow, like this:
If you delete this icon, you should get a message like this:
As long as the 'shortcut' word is in the message "Are you sure", everything you delete is a shortcut and not your actual files... so go ahead and delete it. You can then create a new shortcut or just use the 'Documents' shortcut located on the start menu:
-
I want to disable frequent sites that appear when I right click on the shortcut of Firefox in the start bar. I mean this: http://postimg.org/image/869kxbg1r/
Thank you!Hello AlinDW3, please try this: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named browser.taskbar.lists.frequent.enabled. Double-click it and change its value to false.
-
A click on the shortcut to Chrome, was directed to a different Web site. Went to the McCaffee help, now headed to Google, but could not connect. Not a techie, advice? On a laptop with a Router 2 son. Thank you
original title: unable to connect to Google ChromeHello
What operating system is installed on the computer?
You can contact the support of Google Chrome for better assistance.
http://support.Google.com/chrome/?hl=en
Hope this information helps. -
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
The program is called DinoCapture and is a digital camera for microscopic work. It is stored in C:\Program Files (x 86) \Dino. When I click on the shortcut it does not have the necessary screen but displays a run-time error 75. I ran FixCleaner and also use Norton 360, which contains a firewall. I would be grateful any adivice. Thank you.
Hello
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it
It is not compatible with vista, you can try running it in a previous operating system mode
This does not work for all programs
read the information below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If a program is particularly important to you, there is this way of trying
but it's expensive, because you must have a previous operating system license to install
This method also works in vista Home premium, BUT is not supported by microsoft
-
Task Scheduler with a click - once the shortcut.
Windows XP I used to have a scheduled task that would begin its click - once the shortcut program. It would update the program if necessary, and run.
Windows 7 with the new Task Scheduler, I can't figure out how to make this happen. My program/Script is the path to the program\Program.appref - ms. (this running in a cmd window works fine).
When he tries to run, he sends errors following back:
Task Scheduler failed to start 'C:\Windows\system32\dfshim.dll' action pending '{155bc786-43ff-4a0f-a7b7-523a07bff2a8}' work "\Test. Additional data: error value: 2147942593.
Task Scheduler could not start instance "{155bc786-43ff-4a0f-a7b7-523a07bff2a8}" "\Test" task for the user 'XXXXX '. Additional data: error value: 2147942593.
Thanks for any help.
Brent
Hello
Take a look at this document for steps in the Troubleshooting Task Scheduler.
http://TechNet.Microsoft.com/en-us/library/cc721846.aspx
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lightroom crashes.
I uninstalled Lightroom, re-installed, but everything remains the same. After clicking on the play button, the video window is black. I can only kill Lightroom in the Task Manager.
I use Windows 7.
Thank you for helping me.
OK guys, I have a solution. Press escape [ESC] to close the video window. Yes I know... It took less than hour of my time to understand this. If Adobe please, no matter how lucky you could focus on the provision of a useful product, not to invent unnecessary mess that have zero impact on your username? And Holy shit, employ a specialist UX, this is catastrophic!
-
What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?
The images could be anything - check the links Panel.
What you see (and copy) is just the screen preview, not the actual image data.
-
Dear Sirs,
Nice day
I just downloaded photoshop cc 2015 and I bought it... when I try to open the icon starts to jump and then it disappears and I can't go through the application.
Please help me as soon as possible
Kind regards
You see the splash Screen When you open Photoshop CC 2015. It looks like this
Otherwise, try the steps mentioned below
- With all the Adobe apps closed off creative Application of cloud and sign sign check connect and disconnect activate Cloud Creative applications
- Try to reset the Photoshop preferences (we assume that you are using a MAC computer)
Hold down Command-Option-shift keys at Photoshop startup, and then click Yes on the Prompt.Refer using Photoshop | Preferences
Let us know if this helps
~ Assani
-
I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text
«To display all of the content of this document, you need a later version the viewer PDF.» You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html for further support, go to www.adobe.com/support/products/acrreader.html"
Needless to day, I installed the latest version. I even reinstalled using the link in the message, but nothing helped. Whenever I click on the link to go forward, I get the same message. Question: (i) is it my PC/software (Vista), (ii) is the site where I'm trying to submit the form, or (iii) is it the software acrobat reader. Note that I used successfully the last version to fill out and sign forms.
It is none of them. It's Chrome, which is ignoring Adobe Reader and showing the message.
Solution: just save the document (with the message) to your desktop. Then open it in Adobe Reader. The 'real' should then display.
-
I love the old version of Firefox, because I REFUSE to use my computer without Kaspersky. I have it? > Kaspersky is MORE important for me than Firefox (G.Chrome is my backup)
Now I have KIS 2016 and I love its hexagonal icon, showing attempts it is blocking (it is set to block). Firefox 3 times now DELETED this icon, but shows that the Protection of Kaspersky is always an active add-in. I had to uninstall KIS 2016 3 times to return to this icon. When I click on the gear to select the background choice 'Reset all the Add-ons to update manually', nothing happens. No check mark shows, in Options / Advanced, I chose never "check updates". I'm tired of wasting my time to re - install KIS 2016 to get back on this icon. About: config I have enabled FALSE app.update.auto, app.update.enable and app.update.silent. What can be done in addition to the removal of Firefox? (I'm NOT going to install latest Firefox because it is incompatible with KIS).
You are using a version of Firefox that is very old, please upgrade to the latest version of Firefox updated to the latest version. Kapersky drops support for older versions of Firefox, so if you do not update you may encounter problems in the strange, not to mention many security bugs in older versions of Firefox.
Then, make sure that you use the latest version of Kapersky and then use controls, buttons and Toolbars Customize Firefox to add the icon of kapersky on toolbars of Firefox.
-
When I click on the + sign to open a new tab, all of my most visited sites are empty
When I click on the sign + to open a new tab all my most visited sites are the blank page. I know that there is a parameter in the config which is set to false, and must change. I don't remember who it is, can you help me?
- In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
- Click on I'll be careful, I promise!, to continue on the subject: config page.
Search for the string "browser.newtabpage.enabled" and set the value to 'true '.
Solved?
Maybe you are looking for
-
iPhone does not remember network wifi from 10.0.2 upgrade
Hi, I have an iphone with OS 10.0.2 5s (A 14, 456). Given that I have updated to version 10 my phone does not remember the hidden network (hidden ssid, security wpa2, no proxy, without filter mac or anything special) at work. The AP is a Cisco Airone
-
I searched my computer and can't find the file for the alert detector. I have remove in the parameters of confidentiality, but as soon as I log in it's back! makes me crazy. It does not show in my firewall at all. What now?
-
Is there anywhere a technical manual for the NB100?
Is there anywhere a technical manual for the NB100? I want to replace my internal hard drive with a bigger and Dona´t want to destroy anything, so a manual for how best to open the NB100 would be good :-) Cola
-
can I switch from xp to windows 10?
received a laptop unused former bought 4-5 years ago. the product key will not work and the Word locked. trying to move from xp to windows 10 said... but I can do? If so, how? can not buy any software package so that it should cost no money. Thank yo
-
E4200 descendant speed limited to 6 Mbps
I posted this in the forum of wired, because it is the wire speed is limited, but it seems that there is so more expertise E4200 here, here, it's once again: I have a fiber service Hotwire and the plan is supposed to provide 20 Mbps downlink speeds.