I just got a message saying that my imac has obtained a bank worm virus
I just got a message saying that my imac has been infected by a bank worm virus. Is it a hoax? Should I do something? A complete analysis of the system is recommended. Should I do with it?
P
SCAM, nothing more
Close safari and if she force quit
restart safari with the SHIFT key is pressed
Avoid this site is a scam.
Tags: Mac OS & System Software
Similar Questions
-
REFERENCE DELL CORP. JUST SEND A DELL TECHNICIAN TO MY HOME TO INSTALL A NEW HARD DRIVE AND REINSTALL MY WINDOWS 7 HOME PREMIUM ON MY LAPTOP. A DISABILITY I CAN'T USE WINDOWS 8 OR 10. DELL TECHNOLOGY SET UP MY PC TO INSTALL WIN 7 UPDATES. IT HAS WORKED FINE UNTIL TODAY WHEN I SAW A NEW MESSAGE IN WINDOWS UPDATES, THE MESSAGE SAYS... WINDOWS 10 HAS JUST BEEN INSTALLED ON YOUR PC, RESTART YOUR PC FOR WINDOWS 10 CAN BEGIN? I NEVER AGREED TO HAVE WIN 10 BEING DOWNLOADED ON MY LAPTOP, BECAUSE OF A DISABILITY, I AM NOT ABLE TO USE WIN 8 OR 10 WINDOWS, I DON'T WANT TO NOT SEEM RUDE, BUT ANY SOCIETY THERE REALLY POWER TO CHANGE A STAFF OF LAPTOP? THIS SEEMS TO GO AGAINST WHAT THE RULES ADA AND RULE OF LAW, I THOUGHT THAT THE AMERICAN WITH THE DISABILITY ACT WAS A LAW AT THE NATIONAL LEVEL, I DON'T WANT OR NEED ANY KIND OF HASSLES. I JUST WANT TO BE ABLE TO USE MY LAPTOP WITH WINDOWS 7. DOES ANYONE KNOW HOW TO EMAIL OR 'CHAT WITH MICROSOFT' OR DOES ANYONE KNOW HOW I CAN STOP WINDOWS 10 MARKET, BECAUSE WHEN I TURN OFF MY PC, WHICH IS SUPPOSED TO START WINDOWS 10! THANKS for ANY HELP at ALL :) maryann10144
You received answers for this question here...
-
I got a message saying that my iCloud storage is almost full. However, I tried to delete data in iCloud and I can't. I get a message saying to try again later. When I try it later, I get the same message. Is - this forcing just to buy extra storage space, or am I being too cynical? Any suggestions?
Take a look at this article, it can help you manage your iCloud - Apple Support storage space
-
I just got an email saying that I bought 3 movie rentals with a value of £116,15 via the iTunes store. I've done this! Someone else?
This is a phishing attempt. Do not respond. Shall not disclose any personal or financial information. You can use the address below to the suspicious message as an attachment to the Apple. [email protected]
The link below has information to identify fraudulent emails.
-
Help! I installed yesterday the music notes with approximately 900 MB of free space on my iPhone 8 gb 5 c. When I tried to record a song of the trial, I got a message saying that I had no space on my phone. ITunes says I have 2.7 GB on the other! Anyone else had this?
I did a full restore and got 2.9 GB of free space, but in an hour (without using phone at all) I was at 0 MB of free space. Phone is unusable!
Anyone who has had this and what I can do about it?
Since your not sure what the 'others' are I would recommend you to restore your iPhone. I know that you will lose all your data, but not restore from a backup of iCloud so start as a new phone. You can back up your choice and if necessary to write all your contacts on a sheet of paper and then add hide them. Depending on the severity, you want that storage
-
I got a message saying that an update is available. But I have a popup saying "Oops!" You need a data connection. But later I get a notification saying my update its available, so I'm updating. Now, I'm white icons in the bar notification and a phone that still wants to update but cannot because of the notification "no available data connection. Am I going nuts?
-
I got a message saying that the RPC server is unavailable. My print spooler seems OK and my Dependencies tab it shows not itdepends on CPP, but I can't use my printer and I can't download the software because the driver is missing. I can't download the driver for some reason any. My printer is a lexmark X 1190.
Hi donnasmum,
1. When you receive the error message?
2. did you of recent changes on the computer?
3 when was the last time it was working fine?
4. do you have security software installed on the computer?
Method 1
According to the Lexmark solution, you will need to restart the service on the computer print spooler.
Error: "the RPC server is unavailable."
Method 2
If fails it to step above then check out the link below and run the fixit tool available.
Problems printing and printing errors
-
Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?
original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I bought adobe acrobat, but every time I try to open it I get a message saying that the trial has expired.
Acrobat successfully downloaded. no problem. but it does not open. don't give me the error message that trial has expired and I want to buy it. I already bought so... I'm stuck. I tried closing everything down and start again (twice) always the same error. tried to re - download. no help. any ideas?
It gives you an option to connect or upgrade this software under license. If yes click identify you / license of this software to go further and turn it on. If it's a perpetual license activate by entering your serial key and connecting and if it is a subscription then just sign in with your Adobe it will activate a said.
-
Whenever I'll sign in my e-mail, I get an error message saying that my account has been blocked temporarily. I changed my password, and I always get the same messages. I can't send email because it asks me to verify my account. When I do, I always get the same message. What can I do else? Help!
Hi Tom,
Are you referring to Windows Live Mail? If so, I would say that to visit the Windows Live Solution Center that is not a problem we can help solve the answers: -
I get a message saying that the installation has detected that a reboot of the machine may be pending and recommend I have quit the installer and restart my machine. I did 4 times and tried to install again and again but keep the same message. Help, please!
Hi Keleahaiko,
Please click on IGNORE and continue with the installation, let us know if this helps.
-
The progress bar is almost all the way to the end and then stops while the wheel keeps spinning. Finally, the bars of growth ends and about 30 seconds later, I get a message saying that the synchronization has failed. Everyone knows about this problem? Is this something I do? Is there a problem of "traffic jam" to the cloud now?
Links for synchronization of files that can help... all the links I have, since I don't know your specific problem
FAQ - https://forums.adobe.com/thread/1937790
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/help/sync-settings.html
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-Size limits https://forums.adobe.com/thread/1488242
-sync and send a link http://forums.adobe.com/thread/1427516?tstart=0
-Record ghost https://forums.adobe.com/thread/1490445 problem
-an overview of https://assets.adobe.com/files assets
-File sharing https://forums.adobe.com/thread/1838790
-
I got a message saying that caslexec has stopped working
I have a message saying that caslexec has stopped working, I don't know what it is and don't know how to fix it
Hi charlesbuckby,-What version of the operating system are you using?-When exactly you get this error message? It is at the start of the computer or at the launch of a particular application?CASLExec is part of the HP support assistant, try to use HP update to see if there is a new version available, if there is support assisitant install it.For more information, see: -
Whenever I try to install firefox on my laptop, I get a message saying that the installation was interrupted. I use windows 7.
Try the full installer...
-
I have problems with Windows7 Home Premium and WWII CFS joystick operation. I get a message from gibberish, saying that the controller has been changed. I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file. Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either. Any suggestion would be appreciated.
Thank you
Hi Bob,
You can consult the following links of wire and check if it helps.
Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?
With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium
Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Maybe you are looking for
-
Apple, you've done a lot of updates it's cool thanks. You can create a way to recover the deleted text messages? We can to voicemail, but it would be nice to recover text messages or the ability to save. also, please add a few more accents for Siri?
-
I need drive recovery for Satellite U400-10N
Hi fans of Toshiba Please I need the recovery cd for my labtop. The model is Satellite U400-10N Quickly please
-
iBooks crashes immediately on startup
After a clean install of OS X 10.11.3 El Capitan, I can no longer start iBooks as it crashes immediately: Process: iBooks [2980] Path: /Applications/iBooks.app/Contents/MacOS/iBooks Identifier: com.apple.iBoo
-
the battery lasts less with lollipop
I knew that my motorcycle g 1st gen battery drains initially compared the kitkat. also with the lollipop, I sometimes feel the blocking of phones... is this common?
-
Unable to flash last Bios, help
Hi, I went into the support of pilot and found a bios updated 'BIOS_Acer_P01. A2L_A_A 'for my windows 7 x 64 X4620G veriton (my currrent's BIOS_Acer_P01. A4). I downloaded the Bios file and try to Flash but error pop up. If anyone can help please, th