I just got a new modem att wireless, now my phone cannot connect to the printer as it used to...

Similar Questions

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• I just got a new laptop how can I move my creative cloud to the new?

  I just got a new laptop I want to spend my creative cloud account to the new, how do I do that?

  You will be able to activate the CC on two computers.

  If you want to disable the subscription from the old computer, then you just need to disconnect from Creative Cloud Desktop App

  Connect and disconnect activate Cloud Creative applications

  To install on the new computer products see link below

  Download and install Adobe Creative Cloud apps

• I just got a new laptop windows 8 and I am trying to install the version of photoshop elements I bou

  I just got a new laptop windows 8 and I try to install the version of photoshop elements, I bought at Costco on this issue, and it will not accept the serial number on the package.

  Hi Jglowney,

  Please let me know what error you get when you use the serial number to activate.

  You can check: http://helpx.adobe.com/x-productkb/global/error-serial-number-invalid-try.html

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I just got a new Acer monitor - but now I have no sound, because there is nowhere where to plug in the connection - what I do

  I have a new monitor, which has no connection to speakers - speakers integrated supposedly.  But I have no sound - what should I do?

  What type of connection the monitor use (between the monitor and CPU)? Have you checked the folder sounds and Audio devices in Control Panel to make sure that the sound is turned on?

  Your best bet is probably to contact Acer technical support (FAQ or maybe forums) to help with this problem.

• How to re - configure a Linksys E1200 wireless router after that I got a new Modem

  I just got a new modem.  My E1200 Linksys wireless router no longer works.  Technical support said it should be redefined to work with the router.  How do I do that?  Thank you

  Hi, feibelal ! You don't need to have an active Internet connection on your Mac to be able to access the user interface of the router E1200. The steps in the link provided by Thaddeus_A should do your router works.

  Kind regards

  Ethel_10700

  Linksys technical support

• Unable to connect to the printer wireless HP D110

  Bought a new printer D110 last week.  Turned on, it has detected my wireless router Actiontec (Verizon FIOS) with signal max, and I logged it, using my WPA key.  It appears that he successfully connected and returned a hard copy report indicating that he has passed all the tests, at the address IP 192.168.1.4, which is within my reach.

  However, when I told the installer to use wireless rather than in USB mode and entered the IP address assigned to the printer, she returned with a message that it cannot connect to the printer.

  I disabled all firewall and antivirus software and repeat this step again and again, same result.  It's on a laptop Toshiba Satellite brand new under Windows 7 Home Premium.  The laptop has had zero problems wireless in and of itself.

  I repeated the installation on a 8 years old Sony Vaio laptop running Windows XP Home Edition with all the latest service packs and updates.  Same result, failure.

  I checked the software admin to the router, checked that it has detected the printer and assigned to this address.  However, neither the router nor either laptop can ping the printer successfully.  Laptops can ping each other, and the router pings successfully.

  I went to USB mode and connected the printer to the new laptop.  Works very well.

  I'm guessing there's a permissions/firewall problem going on here.  I don't use MAC filtering.  I opened the port 427 incoming UDP activity.  No change.  Any help appreciated.  Thank you.

  You can try to run WIndows Update again and again to make sure that your system is the last and largest.

  Also, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• My computer says that the battery is "plugged not charging" I just got a new. Any ideas how I can solve this problem?

  My computer says ' plugged not supported "I just got a new battery... How can I fix?

  Hello

  You should really be asking in the forums for your version of Windows. Click on the
  Appropriate forum in the Menu bar under the Logo of answers on the upper left on
  This or any page.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------------------------------------------------------------------------------------

  Are you sure that the battery is compatible with your system?

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  =================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• I got a HP LaserJet P1006. They won't let me install. I just got a new pc. and I was installing in the new pc.

  I got a HP LaserJet P1006. They won't let me install. I just got a new pc. and I was installing in the new pc... It of getting so far and keep coming back me and I do and then click Next. Then her ' tell me to go back...

  Hello

  What is you get the exact error message?

  You have the required drivers for the printer?

  If you have problems installing a printer, or if you have added a printer but are unable to use it, you need to maybe install or update the printer driver so that it is compatible with the version of Windows you are using.

  Some drivers that come with Windows, are available through Windows Update, or are registered on your computer through the hardware installation process and are ready to install. In other cases, you will need to install the drivers using a CD or DVD provided by the manufacturer of the printer. To install these drivers, follow the steps to use the Printers folder. If the driver you need is not already stored on your computer or if you do not have a CD or DVD, try to search the website of the manufacturer of the printer to see if you can download and install from there.

  I recommend you go through the manual supplied with the printer first. The manual includes the steps that will lead you through the installation process.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01179194&tmp_task=setupCategory&LC=en&DLC=en&cc=us&product=3435684&lang=en

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.

   

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Let us know if this helps

  Concerning
  Anthony.

• I just got a new Windows 7 computer. How I completely restart the entire computer and lose all files, applications, etc., that never came with the computer first?

  * Original title: restart the computer

  I just got a new Windows 7 computer, and it has many applications in this shift makes the apps that I really need. How can I completely restart the computer world and lose all files, applications, etc., that came with the computer first

  If these are apps you added and want more, you can use the functionality of your computer factory restore. Unfortunately, this erases the disk and leave you with a double précis of his State when you turned on for the first time.  Then, you would have to do all the updates of Windows and then install all the programs you want.

  Otherwise, use programs uninstaller (from Control Panel) for each application that you do NOT want to uninstall.

• just got a new computer with Windows 7 Professional - there are no games on it - I would like to download the game Freecell which is normally part of Windows - can anyone help?

  just got a new computer with Windows 7 Professional - there are no games on it - I would like to download the game Freecell which is normally part of Windows - can anyone help?

  [Moved from comments]

  Hello. To activate the other native components of Windows, go to start > Control Panel > programs. In "programs and features", you will see "turn Windows features. Go ahead and go to 'games '. Expand it '+' and check out the games you want. Checking the box next to 'games' will add all.

• I bought Photoshop previously, which was an installation CD, but I just got a new computer, which is not a hard drive. How can I reinstall the program?

  I bought Photoshop a couple of years, which was installed by the CD. However, I just got a new computer, which is not a disk drive, so I can't reinstall the program. Is there a way I could download it with the serial number, so I can still have the program on my computer?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have 6 LR on my desktop and notebooks (as the license allows). Just got a new laptop computer and uninstalled the old laptop, but now I get the error that I have to disable a computer before I can activate on my new machine. How can I disable an instanc

  I have 6 LR on my desktop and notebooks (as the license allows). Just got a new laptop computer and uninstalled the old laptop, but now I get the error that I have to disable a computer before I can activate on my new machine. How can I disable an instance that has already been uninstalled? Thank you!

  You are now logged for all activations.

  You can activate (sign) on 2 installations simultaneously.

  Let me know if you still have a problem.