I just installed Windows XP (Yes, XP) with Acer AL1716 monitor attached, but it installed as defa

Similar Questions

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• HP Pavilion dv4: can I factory reset with an external monitor attached to my laptop?

  I got a laptop HP Pavilion dv4 entertainment PC. It has a cracked screen and I use an external monitor attached. Can I do a factory reset with the attached external monitor? The monitor is an HP w1815 LCD, case ini that matters.

  Thanks for any help on this.

  I would like to add that I can see on both screens only on screen cracked that I can't see the bottom of it due to cracking. As recovery options are visible on the external display, it would be prudent to start the recovery process? I made a few choice, but I am now at the point choose to 'pull the trigger' and click next to start it or hit Cancel.

  Thank you.

  Hi @Auntboris,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I take that you acquired an HP Pavilion DV4 laptop and want to know if you can do a factory reset with an external monitor because of the cracked screen.

  Yes, you can always make a recovery.  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP

  Here is a link to HP laptops - how to restore backup files created during the backup procedure F11 to help restore your files if you selected this option.

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the ""Thumbs Up Icon " below."

• 'Input not supported' with Acer AL2216W monitor

  I use Windows Vista Home Premium with Service Pack 2 in a system with an Intel D946GZIS motherboard and an ACER AL2216W LCD display panel. This system has worked well for over a year, but recently in a battle of two months with a problem of code 10, the screen would occasionally drain and display "Input not supported" in a small floating window. As a first step, start with F8 would allow the system to boot in a 640 x 480 window which would quickly find its native resolution of 1680 x 1050. But now it starts directly from the screen to 640 x 480 to the State banned in normal mode, make possible adjustments to display.

  I can still use this display Mode without failure, but find that Safe Mode display adjustments do not affect the display in normal mode. In addition, a panel of HDTV used as a monitor instead of the Acer works wonderfully in normal mode in 1920 x 1080, but display settings to a lower resolution made with it do not persist when Acer Board is restored. Finally, my system is no longer recognizes the Acer AL2216W, but use a "default monitor.instead." And I can not install the Acer in the Mode panel without failure!

  You can try to uninstall your display driver in Device Manager, then reboot. Check if the monitor is listed under Device Manager. Your monitor should be below or try to reinstall the driver using the procedure on the link in my first answer.

  You can then go to the support site for your computer manufacturer and download the latest display driver specific to your operating system. Look for instructions on how to uninstall previous drivers and install the latest driver.

• Windows XP Professional installation with SP3 OEM CD applied but updates from the Microsoft web site does not-2011

  August 22, 2011 I just do a fresh install of Windows XP Professional formatting the hard drive. I then applied SP3 for an OEM CD, I bought from Microsoft several years (part number X 14-60166-02). Even if it is now at the level of the SP3, the automatic updates from the Microsoft web site will not work. If I bought the latest version of the SP3 CD-ROM, which will be the same as what I have now, or it will integrate all of the fixes that have taken place in recent years? Thanks for any help on this.

  Run SFC/scannow

  File system (CFS) auditor checks that all the XP files are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of the XP system files with System File Checker: SFC/scannow

  http://support.Microsoft.com/kb/310747>

  08/22 / 1104:49: 20:00 UTC

• My iPad 2 Air won't go to my music. When I touch the music icon must just me at my music screen with a helmet wearing girl but no icon to go to my music from there as usual. I've recently updated to iOS 9.

  Music on my iPad 2 Air app doesn't give me the opportunity to go to my music since iOS 9 update. Stay right on the screen with the girl who wears the helmet with the options below, as it used to.

  go to settings > music and stop SHOWING the APPLE MUSIC

• STILL not get Windows 8 to search for a VGA monitor attached to my laptop!

  A few days earlier, someone here recommended I download Windows Vista drivers to fix the problem, but I can't find the access/wire path to reach these downloads. There, can anyone help?

  Hi John,.

  Are you referring to your previous post on this forum?

  If so, you can click on your username will appear in the upper right of this forum to see a list of all threads that you posted here. To avoid confusion, I replied with a few troubleshooting steps in your previous post. Please, try the following steps and get back to us.

  Here is a link to your previous post:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/need-help-solving-XP-to-win-8-migration/8f36c9ac-AC50-47cb-A781-94b52a5e3d3e

• HP 15-r011dx noteboo9: no audio when with the second monitor attached and Extend mode, duplicate or second screen only

  When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode.  I really want to use the second screen for PowerPoint/Presenter and play a video (with sound).  Even if I try to play a video on YouTube, I can't get audio only mode p / screen.  Any help would be greatly appreciated.  Thank you.

  Hello

  Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.

  Kind regards.

• I have a black screen when I install Windows 8 on Multiboot with Windows 7?

  Hello

  I tried, again and again, to install Windows 8 on a custom installation, so that I could Multiboot Windows 7 and 8 together.
  I already have a genuine Windows 7 Ultimate installed, and I purchased Windows 8 PRO download site Australian Microsoft windows, the operating system on my computer (using software that I installed from the windows Web site once I bought it), and burned the Windows 8 PRO ISO on a DVD.
  I did a forum on how to use disk management to create a partition for Windows 8, it's not the problem.
  Once I run the Windows 8 installation DVD in the Boot menu, I entered my product key and the installation continues its way and the computer restarts like twice, but the third restart it comes up with a black screen! I waited 15 minutes, but still nothing around. I also tried different ways to install Windows 8 on a multi boot (as I don't want to lose Windows 7 and all my files - I NEED multiboot), but she always ends up with a black screen with no end!
  Someone please help me, as now Im left without windows!
  Thank you
  -RJ

  Hey

  I found a solution for the problem of black screen!

  Thank you to all the guys who have tried to help me solve this problem. I really appreciate it!

  There seemed to be a problem with my monitor, or my graphics card drivers and windows installation 8.

  The solution has been found on the HP forums, at this link:

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/Installing-Windows-8-upgrade-black-screen-after-Windows-8/TD-p/1974699

  And thanks to cSalman on this forum, he wrote:

  WINDOWS INSTALLATION PROCESS 8 EVEN AFTER THE VACUUM OF THE COMPUTER SCREEN:

  1. In MSCONFIG, uncheck "Load Startup items". Disable everything in the 'Services' tab and then restart the computer.
  2. Install windows 8. After 1 restart, the screen will become empty.
  • Connect another monitor/TV with your laptop / desktop.
  • Your windows process 8 installation display on 2nd monitor/TV, but will remain empty in the 1st monitor.
  • Complete all the installation process of windows 8.
  • Once done, change the settings of the monitor to windows. OR simply close the lid of the laptop and open back

  MY EXPERIENCE:

  • In my case, what happened, I was installing Windows 8 to my Toshiba laptop.
  • I did 2nd TV monitor and installation process begin to show in it, while the laptop screen remains black all the time.
  • After complete installation, my laptop screen stays black and would not be ' t difficulty even with the help of response from Microsoft Support.
  • So they rise to more expert and I suppose me to receive the call from them the next day.
  • Same day that I started to watch a movie with my TV monitor, then I thought allows me to close the lid of the laptop.
  • As I closed the lid of the laptop, TV erased, so I opened the lid laptop back again.
  • As I opened the rear lid, windows 8 has detected the laptop screen and started working

  ------------------------

  And Voila! After disabling all services and startup items in windows 7, then using my TV as my monitor, I was able to complete the installation of Windows 8 and now I'm happy!

  Thanks again,

  RJ

• Refresh Windows 8.1 Pro with Media Center

  Dear all,

  I know that this issue is outdated, but I'm stuck and could not find relevant suggestions to solve the problem. I had a Windows 7 preinstalled on my laptop and when windows 8 pro upgrade offer was announced I was among the first who was immediately upgraded to windows 8 pro and then as a special offer that also gave me the windows media center to activate. I would like to confirm that I have not the mail where in the product key for windows 8.1 Pro 64-bit and windows media center. After the upgrade, except a few hiccups, there is no problem at all. Then when windows 8.1 pro was available on the windows store I've even once upgraded to windows 8.1 pro. After the installation of my new configuration was Windows Pro 8.1 with Media Center.

  But immediately after the upgrade, I realized that the discount into account and recovery option did not work. He always encouraged me that some files are missing and I need to insert the media. But never, I downloaded an image ISO of Windows 8 Pro and don't have I not a windows media 8.1 pro because of the way I had been upgraded to windows 8.1 Pro with Media Center. in any case, I just forgot the question and never bored on this subject seriously.

  But Offlate I realize that my computer has slowed down considerably. I tried the option to delete the Temp, Prefetch compensation files, scan /sfc, defrag etc etc. But nothing seems to work. Suddenly I realize also that when booting I get a blue screen with the message this process is critical error blue screen death. Sometimes, I just get a prompt Commander with press TP message press Ctrl Alt Del and then some message about a problem in external media connected failure... I never took a snapshot of the same thing.

  Now someone can tell me how to do: -.

  b how to refresh windows 8.1 Pro with Media Center without any media. I have only windows 8 Pro and Media Center Key separately.

  (b) If there is no way to update windows 8.1 Pro without media then

  (I) Comment to download media Windows Pro real 8.1 with the key of Windows 8 Pro on the Microsoft site.

  (ii) what happens if I download windows 8 Pro Media and then try to update windows 8.1 Pro? Will it work?

  (iii) if I download Windows 8 Pro and then reinstall on my laptop running windows, Pro 8.1 will he do a clean install? What happens to the Sony Vaio Care which is preinstalled on my PC? It's the Bios that has been updated on my PC? I checked out the site of Sony Vaio and found that it has not released and drivers for Windows Pro 8 or 8.1 of Windows Pro. Sony has released updates for Windows Pro 8 and 8.1 of Windows Pro only. So after a clean installation from which will be drivers for Bios, graphics, Ethernet, Bluetooth drivers driver, Wireless LAN Driver, SATA driver, card reader memory, Vaio Care pilot, Vaio Control Center, Data Rescue, Notebook Utilities, Vaio Update, Vaio Gate, fast Internet access, Vaio Smart Network, pilot ME, etc etc...

  (c) how to fix the blue screen issue?

  (d) what to do if I get the Message to press Ctrl Alt Del again and it won't start... Return to the menu even again and again...

  I'd appreciate if tech assistants would care to guide me to solve the problem. Any attempt to answer in very technical terms without guides step by step is likely to confuse me further... If a request to all the counterparts to stay simple.

  But a simple thought crossed my mind - why Microsoft did complicate the question so... Why couldn't they keep the key product of Windows 8 and windows 8.1 even for anyone to directly download the windows pro 8.1 and refresh the PC.

  anyway thanks in advance... regards

  Hi Isabelle,.

  I understand that you are looking for ways to refresh your computer.

  IF you get a message missing files when executing update, it is recommended to create a bootable disk for Windows 8.1 and launch then refresh.

  Please follow the link below that will guide you to create the installation media for Windows 8.1:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  You have not an ISO for Windows 8.1 with media center, it's Windows 8.1/Windows pro 8.1.

  Once you launch a clean install of Windows, you must reinstall the application on the computer manufacturer website. and to learn more about the availability of drivers, contact the manufacturer of your computer for help.

  Blue screen problem can be caused for multiple reasons such as drivers, hardware...

  See the bottom of the article that will help you with the blue screen on the PC problems:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Message from press Ctrl Alt Del appears mainly due to an external device, try to remove the external devices connected to the computer and then restart it.

  Please contact the telephone support, suggest so that all difficulties can be addressed, see the link below:

  https://support.Microsoft.com/en-us

  Hope this information helps, for assistance please answer.

• I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

  I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

  Yes

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Hey Billo,

  Could you please let me know, if you are able to see an option to "Create a new catalog" on the lower left corner of the window.

  Also, if possible, could you please attach a screenshot of the window that you see.

  Kind regards

  Tanuj

• I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Br

  I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Bren

  Versions of Windows beyond Windows XP are not entirely compatible with Acrobat 6. The first version of Acrobat that is supported by Windows 7 is Acrobat 8.1 (is no longer licensed by Adobe). The latest version of Acrobat: Acrobat Columbia, six versions more recent than Acrobat 6. You need to upgrade to get all the features of Acrobat.

  -Dov