I just managed to get back to microsoft update.

I just managed to get back to microsoft update and have downloaded 187 number of updates successfully, but on my control panel, add or remove window, they do not appear to have been recorded. Why /.

Hello

You just download them or have you installed them also?

In Add/Remove Programs did check the box "Show" updated (to the top of the window)?

Tricky

Tags: Windows

Similar Questions

  • Impossible to get Defender or microsoft updates

    I started having this problem currently, it has happened twice before.  I'm unable to update windows in addition to the freezing problem.  When I'm in safe mode I do not get the freez problem but the problem presists update.  I tried changing the name of the update file and tried to run the survices but the smoker worked.  I need help

    Thank you

    Hello

    ·         What operating system is installed on the computer?

    In safe mode, you will not be able to download updates.

    Step 1: To find the exact cause of windows update failure, provide the error code you get, when you update fails.

    To do this, follow these steps:

    (a) click on the Start Menu.

    (b) click on all programs.

    (c) when the window opens, click view update history in the upper left corner of the window.

    This gives the full list of recently made updates and also the status of the installation as if the update installed successfully or not.

    (d) in the status column of this window, find the update failed to install, and then click the red X. A new window opens that displays the installation error code.

    (e) Note the error number and post it here.

    Step 2: Try to download updates manually and install at boot.

    Manually download updates fromhttp://www.microsoft.com/downloads/en/default.aspx.

    Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

    Step 3: If you use Windows Vista, reset the windows update components and then try to install the updates.

    If on Windows 7, run the windows update utility.

    The problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When I upgraded to Firefox 9.0.1 I lost many of my bookmark icons. Now the icons are just empty boxes. How can I get back my icons? Thank you!

    When I upgraded to Firefox 9.0.1 I lost many of my bookmark icons. Now the icons are just empty boxes. How can I get back my icons? Thank you!

    Try to recover with this extension:

  • I can't get rid of sweetim, I have to go back to microsoft ie

    I can't get rid of sweetim, I have to go back to microsoft IE, I tried everything.

    upgrade your browser Firefox 8 and check

  • just downloaded firefox 8 and disabled mcafee site Advisor how to get back to version 7

    just downloaded firefox 8 and it disabled the Advisor site on my mcafee security suite. How to get back to version 7 until the site Advisor is compatible with version 8?

    Although I gave up on it for now, if you don't have a lot of extension, you can run it in Version 8, actually if you ran it 7, you're probably doing something else that activate. As their website says you a version number you suggest to reinstall and restart Firefox twice, see

    I have reactivated it as I had turned it off and it works, guess I'll try it for a few days now that I'm on 8.0. While the difference between what I ran on 7.0.1 this is I have reactivated earlier "McAfee Site Advisor" but then the main reason that I have no problems is that I avoid bad extensions.

    I see that it is not marked as compatible with 8.0 but many of my extensions are not anyway. I have

    extensions.checkCompatibility.8.0 set to false

    and my McAfee Site Advisor is 3.4.0

    The extensions that I use are listed hereand I actually have links with the compatibility reports it for each extension, but were not check things there for several months.

  • I need help to get back on facebook! I asked to change my password more than a month and can't always answer their questions of code just so that I can join!

    HELP ME PLEASE!

    I tried to reset my password facebook more than a month and I can't get it fixed. I just want to be able to get back on my account and enjoy. I don't mind giving my phone number to someone who will address this problem seriously. Let me know as soon as possible!


    Hello

    Please contact the Facebook Support.

    Facebook Help Center
    http://www.Facebook.com/help/

    How can I contact Facebook support?
    First, select the subject of your question of "list of topics".
    Then select the appropriate contact form or answer your question in this section.
    http://www.Facebook.com/help/?page=835

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Hi Ive just updated to 2015 CC and all my ins plug attached to the previous version have disappeared.  Someone knows how I get back them please?  Thank you

    Hoi

    Ive just updated to 2015 and all photoshop my ins plug attached to my previous version disappeared. Someone knows how I get back them please?

    Thank you

    Hi alanp

    We recommend that you reinstall your Plugins after downloading the latest manufacturer's Web site.

    View 2015 release of Photoshop CC: FAQ

    Concerning

    ~ Assani

  • When I try to download an extension for my CC Adobe Extension Manager, I get the message that I need the version of photoshop version 13 or more.  I just installed Photoshop cc over the weekend.

    When I try to download an extension for my CC Adobe Extension Manager, I get the message that it requires Photoshop version 13.0 or greater.  I just downloaded photoshop CC this weekend

    PS What version of the extension manager? Make sure that you do not use the CS6.

  • My thunderbird email just lost all the files, I had. I can get back somehow?

    Yesterday, I noticed that no email came through. When I hit get mail it seems it failed or safety was not valid. I tried to substitute, and again, it would fail. Today I came home to see if it worked and it was not. I went to my account and looked at the account settings. I did some research on google and did a 2nd represent the same email. (All using Pop3). Then I had 2 identical accounts, both with all my files. (it's a business e-mail, I have a lot of important info here). It worked so I deleted the other account and then everything disappeared. EVERYTHING! No email or files of any kind and then he told me that I had no access to anything. I had to play around and finally get email in the account, but only from June 10 to the today. My files have disappeared... Is it possible to recover. I have some very important things that I need Monday. How can I get back them?

    Mail is listed under account. Where did you think that the records would be when you deleted the account that they were attached to? People do it because there was a Thunderbird, but which reality help me to understand.

    Have a look here http://kb.mozillazine.org/Recovering_deleted_mail_accounts

  • I lost my files in my outlook express Inbox. How can I get back them?

    I lost my files in my outlook express Inbox. How can I get back them?

    The email you see in sent items. Is - this mail you thought you deleted a long time ago? If so, it almost sounds like you had an old identity.

    File | Identities | Manage identities. Is there more than one list? If Yes, go to the other identity. If not, read on...

    Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

    Why OE insists on compacting folders when I close it? :
    http://www.insideoe.com/FAQs/why.htm#compact

    Why mail disappears:
    http://www.insideoe.com/problems/bugs.htm#mailgone

    About file Corruption:
    http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

    Recovery tools:

    If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

    To restore a folder bak on the message store folder, first find the location of the message store.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

    Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

    Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

    First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

    If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

    If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
     
    If you have not then bak copies of your dbx files in the Recycle Bin:

    DBXpress run in extract disc Mode is the best chance to recover messages:
    http://www.oehelp.com/DBXpress/default.aspx

    And see:
    http://www.oehelp.com/OETips.aspx#4

    A general warning to help avoid this in the future:

    Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

    Bruce Hagen ~ MS - MVP [Mail]

  • How to recover the Satellite L to get back on Vista?

    Hiya,

    My son has recovered a part a little Trojan, it only would not let us go in safe mode or restore. The only thing we could do was to completely clear all & use the disks to reinstall again. Simple normally... but this time it wont run something else that XP now, I tried 5 times to reinstall from backup disks to return to Vista and it freezes just the farthest, I managed to get was the installation of updates, but it froze once again to 25% on the portion of the Net framework update.

    His market on XP at full speed now, but if I try to put Vista slot via the backup of disks it takes about 5 minutes so he can perform an action, slow is not the word.

    I want to just go back to Vista and now completely lost, why used it keep running Vista?

    Anyone any idea?

    Hello

    If I understand your question; you have installed Win XP on the laptop, but you want to install Vista, but Vista freezes and is slow is it good?

    What cell phone do you have?
    As far as I know the books supports the new SATA controller.
    This means that you need the SATA driver to install the Windows operating system.

    You can change the compatible SATA mode in the BIOS. This will allow you to install the Vista and other operating systems Windows without the SATA drivers, BUT this will slow down the performance of the HARD disk!
    This is perhaps the reason for your question

  • Cannot get beyond error 0x8024D007 when trying to get Windows Update or Microsoft Update

    I tried to get the Windows Update and Microsoft Update on a Windows XP computer as well, but I got the error 0x8024D007 with both.  In view of this error message on your site, I did the registry fix and still no change.

    It took me awhile, but I found a solution that worked for me.

    1. Remove Service Pack 3 - if in Control Panel , you do not have an option delete, just Start, run and type: c:\windows\$NtServicePackUninstall$\spuninst\spuninst.exe

    After removing SP3 restart. Now, go to Windows Update and it should load fine. Go ahead and install high priority updates and reboot again.

    2. reinstall Service Pack 3 - it is better to just download the .exe for SP3 file and run it from the machine rather than using Windows Update to download and install. Before you try to run the .exe however, go ahead and avoid the "Access denied" error by typing this command in a command prompt window:

    secedit/configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb/verbose (Pay attention to the spaces)

    Now you can reinstall the SP3 and Windows Update should work again. If you get hooked to the last part of the installation which is "Scene cleanup", make sure that you have given him enough time to finish (a few hours) then simply open the the Task Manager and end of the process. Reboot, and you're good to go.

    * This fix also worked on a Server 2003 that had the same problem. Uninstalled and reinstalled SP2 using the same method. It is now up and running and pulling on the updates.

  • Fonts of computer how to get back the original font?

    Hi I just installed this game yesterday called special forces.

    When I switched on my computer: today, the fonts from my computer changed everything for the font set.

    still, the resolution is 1024 x 768, I wouldn't change a thing. How to get back the original font?

    Help!

    Hello, LynA1103,

    Did you change Windows themes when you installed the game?

    Have you tried a system restore to a date and time before installing the game?

    What is the system restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Right-click on desktop and select Customize

    Select the appearance and color of the window

    Click on the properties of classical appearance open for more color options

    Select the theme under the color scheme

    Click Advanced settings

    Click on the title bar Active

    Select font of choice

    Select the color of the font of choice

    Click Ok, apply, Ok

  • How to get back my 'H', 'J', 'K', 'L' readers?

    I took out my card to Sd memory on the front of my computer and my records have disappeared. Can anyone help me to get back them. Thank you.

    Hello

    Put a card in the reader and see what happens.

    If you can not get the card reader to work, it can be replaced or an external card reader is
    not expensive.

    They go bad sometimes. Try these:

    / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

    -----------------------------------------------------------------------------------------------------------------------

    Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
    Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
    following the UNINSTALL.

    Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
    the category itself - REBOOT. This will refresh the USB driver stack.

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as
    all USB devices that you previously used. Run Options and check the 1st three choices to see if one is
    it. you can remove all instances of the drive and restart again.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

    Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
    drivers.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Hope that helps.

  • How to get back to Windows 7 if windows 10 is not suitable

    I read in your information if 10 Windows does not work to your satisfaction, then reinstall Windows 7. Should not be able to reinstall Windows 7 then please contact your supplier. I contacted Samsung, my ISP on the reinstallation of Windows 7 laptop and they referred me back to Microsoft for a response. Now, I spent to long in a vain and full circle.

    I am almost computer illiterate and do not understand much of the information found in your response & questions. I think that I am not alone in this regard.

    Everything I need to know is what happens if Windows 10 is not to my taste, and I want to go back to Windows 7, I have no problems with at all.

    My wife has Windows 8 on his cell phone and I hate it, it seems have been developed for touchscreen computers which none of us.

    Windows 10 has the same style as Windows 8, if yes, then I won't.

    How long until Windows 7 is deleted, as has already happened with XP that even once, I had no problem with.

    My feelings are that Microsoft is very large company seem to dictate to us what they want to do to increase their profits on the pretext that their last o/s is better than all previous versions, when in most cases, the previous version works OK.

    John,

    Windows 10 will include a feature to "roll back" the previous operating system (Windows 7 or Windows 8/8.1 on your other computer).  I suggest that you wait until after July 29 to search forum to get advice on what by then there will be messages from users who have tried.

    However, you would be taking a great risk of upgrading without taking precautions first, so that you have other ways to restore your computer to their current state.  You need to do all these tasks on your Windows 7 computer and also on your computer Windows 8

    1. Do a 'System recovery disk' Windows 7 / Windows 8 "Disk recovery" unless you have the installation disk
    2. Test the computer can boot from its Windows 7 'System recovery disk' / Windows 8 "Recovery disk" or the Setup disk [they can be tested without doing anything risky - so if you can't find a safe procedure for this elsewhere in the forum then tell & I'll give you appropriate links]
    3. If your manufacturer of PC included a "factory restore" partition, then you need to know how you can transfer on a USB key as the upgrade of Windows 10 will probably * if not destroy it.  Working conditions differ between the PC manufacturers, so you must check in your computer or manuals on PC manufacturers support websites or in their user forums. [* installation of version Preview of Win10 the fact]
    4. Make a picture of 'system' of the main drive on your computer - the drive on which Windows is installed on
    5. Make a backup of files full of your own files, all downloaded files for installing software, all the product keys needed to activate your applications, all the notes of the IDs / passwords etc.

    It's guide in Windows Help for each of these tasks, and there are also useful discussions in these forums on them.  As you can guess, the preparations will take you longer than installing Windows 10.  All these preparations are things you could do routinely anyway [even without waiting to make any update]; I hope so

    I suggest that you look through descriptions of what makes Windows 10.  I did experiment with it for several months and there is nothing to get excited about.  If there is something you can't currently do or Windows 10 better then consider the upgrade.  If this isn't the case, you can stick with what you have.  Windows 7 will continue to be supported with security updates, as it is now and it will continue until January 14, 2020.  Windows 8 will continue to be supported with up-to-date functional & security until January 9, 2018 and then will be supported with security updates until 10 January 2023-related.

    Just for example & nothing more, I decided to upgrade to Windows 10.  I have two computers and there are things that I can't do on the older one because it has Windows XP - because my needs/desires have increased subsequently to adjust to what I can do with Windows 7 [and because it is now too risky to connect WinXP to the internet].  In addition to wanting to be able to do more things with the old computer, my experiences of Win10 thereon [by using the Preview version] convinced me that there are a lot of things that I would find less confusion if I had the same OS on both computers.  That's why I'm going to pay for a new operating system on the Windows XP computer, and why I improve my Win7 computer age to Win10 as well.

    If you find no compelling reason to consider whether there could be a compelling reason in the future.  If you are ever going to upgrade two computers so do it by July 29, 2016, so it costs you nothing.  If there is no compelling reason upgrade then don't.

    All the best,

Maybe you are looking for