I just need to know how to 'close' of firefox.

Similar Questions

• I need to know how much it will cost for a fan and the battrie

  namely that iam a studtent to the iam school was by using one of the notebooks hp because my father was asking someone in the store of the computer on which would be the best for me at school and they said that the hp pavilion g6 it worked well im good summer use for butts a year in year environment I think. When I went to my place a friend when I turn, it says the fan it works well so I got difficulty and something else in it they said I had a guarantee as it was the difficulty and then after that on the second year I used in 6 months I have need of a fan replacement agine and I know not its own all is good condishion after shoot 2 days later I need to say a battrie replayment so now he leaves me with what I'm doing and now I don't have how much it will cost to fix it and iam not rich and it will take some time to pay off I was woundering is there a way to pay he took just a cheap littile but I need to be a bug in top shap and I want to know how much it would cost to add a new GPU which is a littile better and my GPU is great, but I want just a new one I had a VISION of A6 AMD place help

  Ed... Sorry for the comment about your grammar and punctuation. You erased that upward. In any case, we need your exact model number. There are a lot of G6. Look at the bottom of the laptop or in the battery compartment for a number like G6-xxxxaa, where the x are numbers and the letters a. This will allow me to know the exact references you need. Chances are that they are available on eBay Australia. Then we just need to know how we're going to get your new fan installed.

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• I just bought a new computor. I got Lightroom 5.7 on the old computor and need to know how to download the program on my new computor. Thanks for any help you can provide.

  I just bought a new computor. I got Lightroom 5.7 on the old computor and need to know how to download the program on my new computor. Thanks for any help you can provide.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Hello. I just know that the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new clients. I need to know how to insert a new customer (square), and it is already in alphabetical order on the page.

  Hello.

  I just know that the muse and I need guests alphabetical organization. The problem is that you will always get new clients. I need to know how to insert a new customer (square), and it is already in alphabetical order on the page. The site will be as in the link below, and each customer will have a window of these: http://www.connary.com/. I look back.

  A hug, Murilo.

  I believe you are referring to the rectangles of tile as visitors on the page? not exactly customer database?

  You can add rectangle with different effects with rollover State of mouse and about adding new, you must do this manually in design mode.

  Thank you

  Sanjit

• Outlook express sending problem - I need to know how to remove a message that is too large to send

  I need to know how to delete a message that is too big to send and full of images out of my outlook express, whenever I open outlook it trys to send this mail and legs up to my computer...

  Hi Shawnalmus,

  Try to open outlook express offline or without connection to the network. You will be able to open the Outbox folder and delete the file.

  If you have only a stuckup email in the Outbox, close outlook express and rename the Outbox.dbx file in envoi.old. To do:

  Click on start search-> all files-> Outbox.dbx, usually its in C:\Documents and Settings\Settings\Application Data\Identities\{Identity number}\Microsoft\Outlook Express.

  I hope this helps.

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• I need to know how stop the automatic updates, secondly how do I substitute him "you can't run this program on this pc?

  First of all, I need to know how to stop the automatic updates, second how to replace him "you can't run this program on this pc?  I SWEAR THAT IF HE SAID THAT HE AGAIN THAT I WILL BREAK IT INTO PIECES. Then I'll go buy an android tablet.  Surface, hate hate 8

  Yes running of programs that are not on the store is not possible. It is not a parameter or artificial, it's just that the RT line uses what is called an ARM chipset, also known as RISC (Reduced Instruction Set Chip).  Literally, he cannot read the compiled code of complete programs.  Same reason you can't run Adobe Photoshop on an iPhone, just CPU cannot decode the program.  But on the good side of things, it cannot launch virus either, so he made the first version of Windows that cannot get 'gunked up' over time. It works like an iPad and have a continuous and consistent performance for a lifetime. I'm sad that they abandoned it so fast, I know a lot of people who could use this service.

  Anyway, you can skip the connection at startup.  There is in fact in two ways.  Unless you do a lot of "full stops", I recommend enter Power Options and setting by turning off the "password required when you wake up sleep."  Which will remove the requirement for password of sleep/wake, but if the device never complete a boot will always be a password.  This is a good compromise for safety and security, so if the device is lost or stolen, it eventually crashes when the battery is dead.

  But if you want to delete this, you should be able to do it by running the command NETPLWIZ, as described here: https://www.youtube.com/watch?v=sOYmY-6Wd3Y

• Hi I need to know how to expand the curves adjustment Panel. For example, the curves that I need to enlarge the graphic part, so I could show on a screen at the school. Thanks, Phil

  Hi I need to know how to expand the curves adjustment Panel. For example, I need to enlarge the graphic part so that I can view on a screen at the school and work from this Panel to expand. Thanks, Phil

  You can not. At least, not directly Ben Photoshop. For example, this can be done in Gimp and Photoline, and I had hoped that developers of Photoshop team would have done this allowance now. But no, we're still stuck with a tiny curved panel, which is a real shame, because in other applications, the user can be more precise with the curves.

  If you don't need to show close-ups during class time, use Zoomit in Windows, or turn on the Magnifier in the accessibility on a Mac option.

  https://TechNet.Microsoft.com/en-us/Sysinternals/Zoomit.aspx

• The previous user didn't verify his account. I don't know how to close the session?

  The previous user didn't verify his account. I don't know how to close the session?

  CC just asked me to check it out but it is NOT my account and I do not know whose ID is.

  And now I can not connect with my account. Help, please.

  BTW, there is NOT "Préférences."... "in the setting button.

  Windows:

  Step 1)

  Exit the desktop Adobe Creative Cloud application.

  End Adobe partner all the processes like creative cloud, CoreSync, AAMUpdater, Armsvc... etc. of the Task Manager.

  Step 2)

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe > OOBE. Open the OOBE folder and delete the file opm.db .

  Once you had deleted Opm.db file, run Adobe Creative Cloud application and check.

  Mac:

  Step 1)

  Exit the desktop Adobe Creative Cloud application.

  End Adobe partner all the processes like creative cloud, CoreSync, AAMUpdater, Armsvc... etc of Activity Monitor.

  Location: Applications > utilities > activity monitor.

  
  

  Step 2)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and delete the file opm.db .

  Once you had deleted Opm.db file, run Adobe Creative Cloud application and check.

• I need to know how to read my DVDs on quick time with an extension xvid.avi

  I need to know how to read my DVDs on quick time with an extension xvid.avi

  You have not because QuickTime Player does not support the xvid .avi formats or dvi. You can download the free VLC media player and she plays very well this .avi.

• need to know how to cancel the free trial subscription Starz

  I have an iPhone 6 and need to know how to cancel the free trial subscription Starz.  Help, please

  Follow the instructions in this article to support > view, change or cancel your subscription - Apple Support

• I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

  I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
  In the ideal, of group policy or some ways to disable all the computers on the network

  Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates
  
  Above article refers to-> http://sourceforge.net/projects/firefoxadm/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  Read this noting the last two paragraphs:

  For Apple ID - Apple Support two-factor authentication

  You can try to add on your suggested such password or disable the service and then connect.

• I need to know how to reset my printer

  I need to know how to reset my printer to its factory settings, it is a hp deskjet 3630 series all-in-one

  Hey @Joshua3, welcome to the Forums of HP! The only reset I know of this printer is complete when the printer is in an error state. If you want to perform this reset, you can use the instructions below in the user manual:

  Reset the printer.

  1. turn off the printer.

  2. unplug the power cord.

  3. wait a minute and then reconnect the power cord.

  4. turn on the printer

  May I ask why you need reset instructions. You may be looking to reset the network?

  To restore the default settings network settings

  ● Press the wireless button and the Cancel button in the control panel of the printer at the same time and then hold down for three seconds.

  You can find this and more here: series of all-in-one HP DeskJet 3630 User Guide

  Please let me know if this resolves your request by marking your post as solved (click on Accept as button Solution below). If there is anything else I can help you, let me know.