I keep getting this message error 0x800CCC.90 or 92

? Error 0x800CCC.90 or 92?

I keep getting this message on my table.  How should I 'cure', so stop come me?

Thanks for any help out there.  BusyLizzy

Hello

1. do you get this error message when you try to retrieve a mail?
2 did you change your computer, after which the issue started?
3. which e-mail service you use?

Follow these steps and check if they help.

Step 1:

Temporarily disable your antivirus software and check if that helps.

WARNING:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Step 2:

Test the issue in a clean boot State.

Note: Follow step 7 to your computer as usual.

Tags: Windows

Similar Questions

  • Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

    Hello

    Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

    Hi ErikLee,

    Do you have MS Outlook installed on your computer?

    Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
    If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

    Follow the instructions below and check if the problem is resolved.

    1. reboot your computer, and then start Windows Mail.
    2. on the Tools menu, click Options.
    3. in the connection tab, click on edit to open the Internet Properties dialog box.
    4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
    5. click OK again to close the Options dialog box.
    6. exit Windows mail and restart Windows mail.

    If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

    To download Windows Live Mail, visit the following Microsoft Web site:
    http://get.live.com/wlmail/overview

    For more information about Windows Live Mail, see the Microsoft Web site at the following address:
    http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Whenever I try to update Windows I get this message; Error number: 0 x 80244004

    Please tell me how to solve this problem. Whenever I try to update Windows I get this message; [Error number: 0 x 80244004] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    Original title: Please help me solve this problem I can no longer update Windows XP!

    The website has encountered a problem and cannot display the page you are trying to view.

    There is an MS article that lists some measures to this error message. Have a look at it and try the steps in there. It should help:

    http://support.Microsoft.com/kb/883614

  • I took several pictures on a recent trip, and when I highlight, click on send to:, I get this message: error: 0x8cccD040.

    I took several pictures on a recent trip, and when I highlight, click on send to:, I get this message: error: 0x8cccD040.  I thought to go to settings and check for this possibility, but I don't really know how to enter in the settings.  I am not informed on the evolution of info, etc, so do not know what to do here.  I read several reviews, with some saying it could be my protection antiviruss, or my e-mail settings, settings etc but not sure.  My antivirus is McAfee so that needs to be known.

    Jerry Wallace in Charlotte NC

    original title: sending e-mail

    Unfortunately, I do not use or get answers to Windows Live Mail. Please repost this in the forum WLMail.
     
  • Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

    original title: Windows Mail

    Unable to get windows mail to send or receive.  Get this message error code when you try to send:

    Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
    0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
    To find these server addresses, took some time to locate.  After locating and entering, using authentication
    sign username and password, he kept sign asking repeatedly.
    Any help on these questions would be appreciated.
    POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
    To find these server addresses, took some time to locate.

    POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

    Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

    Noel

  • Keep getting this message dell support center has stopped working

    Keep getting this message dell support center has stopped working

    This has nothing to do with Windows Update. That being said...

    Option A: Uninstalling Dell Support Center 2.0 & reboot.

    Option B: See http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&docid=408523&doclang=en&l=en&s=dhs

    Option C: Contact Dell Support.

  • Whenever I boot, I get this message "error loading C:\users\appdata\local\temp\lkwdsz.dl".

    Whenever I boot, I get this message, since I did an antivirus scan and remove infected file. This is the message I get:
    Error loading C:\users\appdata\local\temp\lkwdsz.dl
    Is any way to re - install this file or to recover? I notice my comp run ridiculously slowly when they surf on the web since this file has been deleted.

    I work on Windows Vista 64-bit.

    * original title-. DLL file missing! Help please *.

    Hello

    I suggest that you try the methods mentioned below and check if the problem persists.

    Method 1:

    You can also perform a complete analysis of the system using Microsoft Safety scanner and check if that detects and deletes the virus/malware from your computer.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2:

    Perform a clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note:

    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Try to install a printer, but keep getting the message error "the specified environment is not valid.

    So I try to reinstall a printer on a computer and I get the message that the printer cannot be installed and the environment specified is not valid.  It was working a week ago and now it is not.  The printer has already been uninstalled, so I'm stumped.  Any help would be appreciated.

    Printer is HP Laserjet 1020

    Hi miket219


    I suggest refer you to the below provided the link and download the latest drivers available for Windows XP on the Web site. Check that if the installation of the last driver put up-to-date helps you solve the problem-

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439428&lang=en&cc=UK&prodTypeId=18972&prodSeriesId=439423&TaskID

     

    I hope this helps.

  • After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

    Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

    You are not authorized to view this page
    You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

    Please, try the following:
    Contact the Web site administrator if you believe you should be able to view this directory or page.
    Click the Refresh button to try again with different credentials.

    Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
    Internet Information Services (IIS)

    Technical information (for support personnel)
    Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
    Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

    Thank you for your help.
    Najib

    Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

    If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

    If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

    (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

    (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

    • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
    • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

    -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

  • I have Windows 7 and still get this message: error while unpacking program code 2. Will you please report to author and I can't findKB2533623

    Can someone help me please I have Windows 7 and get th same message and I can't fint that update in my system

    Hello

    • When you receive this error message?
    • What exactly are you trying to install?
    • Did you install KB 2533623 on your computer?

    If you have installed this update on your computer, I suggest that you try to uninstall it and check:

    1. Click on "start > Control Panel > programs and features.
    2. Click on the link "View installed updates" on the left side of the window.
    3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
    4. Select the KB2533623 update and then click on the "Uninstall" button
    5. Once the update has been removed, restart the computer.
  • When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

    Error loading C:\windows\pxtdmap.dll, what should I do?

    Hi Nancy,.

    The error message says anything else? Just, based on

    "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

    The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
    It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  • I get this message error - "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

    So I had [already] CS5 on my computer. I wanted to move to the new first Pro CC. So, until I did research on the passage, I just uninstall old Adobe all files my computer to ask a table open for my new download [first Pro CC].

    I am a beginner with the 30 day free trial, then initiate the payment once the trial is over. I did everything what I had to do to install the latest version of Adobe first Pro CC.

    Whenever I click the first Pro CC icon, it starts to launch upward, and about 5 seconds and it gives me the error "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project"and stops immediately...

    I have a 27-inch iMac [2014] new nice.

    I have enough memory and ram.

    What is causing this error? For more information on this would be greatly appreciated.

    Screen Shot 2015-07-23 at 8.51.30 PM.png

    -Justin

    I have resolvet

    Hi Jose,

    Seems that it crashes when GPU processing.

    Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

    Press OK, you will get a dialog box in which select "remove previews."

    Try these steps and see if it works.

    Kind regards

    Navdeep Pandey

  • I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

    Windows Update
    Error (s) found: code 80070645 windows has encountered an unknown error.
    I had before the shock of two antivirus this proven system restoration started but no help.
    Fix it to charge microsoft, but has not helped any.

    How can we if this problem, so I can install the updates I need?

    Hi Wyattsdaddy,

    Thanks for posting your question.

    Step 1: Check if Windows update-related services are set to automatic and started.

    Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

    Check the above services below:
    (a) Background Intelligent Transfer Service
    (b) cryptographic service
    (c) Windows Update

    Step 2: Rename the Catroot2 folder

    To rename the Catroot2 folder, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
    2. at the command prompt, type the following commands and press ENTER after each line:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

    3 remove all tmp*.cat to the following folder:

    % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

    Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    Step 3: Reregister DLL files that are associated with Cryptographic Services

    To register .dll files that are associated with Cryptographic Services, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

    2. at the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll
    output

    Note: Click OK if prompted.

    Restart the computer.

    Step 4: Empty the software distribution folder

    1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
    2. in the Services (Local) pane, click Automatic updates and then click on stop.
    3. reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

    Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
    5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
    6. in the Services (Local) pane, click Automatic updates, and then click Start.
    7 restart the computer, and then run Windows Update again.

    Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

    Step 5: Disable the security software
    Note: You can enable it later.
    Step 6: Scan Run SFC
    Please follow the steps below to the auditor of the filesystem as the first steps:

    1. Click Start and type cmd in the box start the search.
    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
    http://support.Microsoft.com/kb/949104/

    Step 7: Components to reset Windows Update
    http://support.Microsoft.com/kb/971058

    Let us know if that helps.

    Kind regards
    Clement Kumar.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • why I get this message c:\programefiles,cx86\avg\ava2012\avgcfgxdll

    Why do I keep getting this message and what it means? c:\programe .cx86\avg\avg2012\vagcfgxdll files

    Hello

    1. what operating system is installed on the computer?

    2. when exactly you get this error message?

    3. have you installed AVG Antivirus 2012?

    Please come back with more information, so that we can better help you.

    This seems to be a Virus/Malware issue, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • I keep getting the message "there are no lightscribe devices in this system.

    I keep getting the message "there are no lightscribe devices in this system.

    I tried to open the recommended site for updates, but I get an error messasage.  Can you help me?

    Follow article

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01900020&JumpID=reg_R1002_USEN

Maybe you are looking for