I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

original title: DNS server does not

Hi Dwright,

1. have you made changes on the computer recently?
2. not the problem only occurs when you watch netflix on Blu - Ray player?

Method 1
I suggest you try the steps from the following link to fix the server DNS does not problem.
a. click on start and then Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. Select obtain DNS server automatically an address and press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.

Method 2
Try resetting Winsock2 from the following link:

How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)

Method 3
Reset TCP\IP.
How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)

Additional information:
Windows wireless and wired network connection problems

Tags: Windows

Similar Questions

  • Blu Ray player and HP MediaSmart DVD problem

    I recently bought a hp with a hp w2408h m9515y desktop computer.  This computer came equipped with a Blu Ray player and when I tried to play a movie for the first time on hp mediasmart dvd I got the message 'content is protected', "the content is not allowed to play in the current display mode.  I also tried to play blu ray on windows media player and windows media center and had no chance.  I spoke with hp and geek technical support team of the best buy also with no luck.  If anyone has any advice I would appreciate it, of course.  Thank you

    Finally, after about 3 hours with tech support at hp, we have solved the problem.  We had to reset the computer to factory settings and it worked.  Erny, thank you for your help, I appreciate it.

  • Unable to connect to the internet. Computer says Server DNS does not

    I have a Dell Studio with Windows 7 Pro. I turned on my computer and I see that my without wire is connected, but I can't access the Internet. I checked to see the problem and I get a message saying that my DSN does not. I am connected to the Internet via the wireless thur my phone and I have no problem, it's only the thur my laptop. What can I do about it? I tried to restore the computer to a point when it was last working properly and it worked for a few hours, but as soon as I closed and logged on to the computer, I had the same problem. What can I do? Thanks in advance.

    PS I'm not very good at technology stuff, simplification of the way to solve would be so great!

    You have McAfee?  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

    - - - - - - - - - - - - -

    If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

  • MS VirtualLab Lync Server 2010 does not. error code 1. tested from multiple PCs. What is the problem?

    While trying to start wirtual lab I received the following error:
    There was an error in the environment of virtual laboratory of construction. Try again or contact support support if the problem persists. Error code: 1. status: failed
    I tried to run the laboratories of different pc and got the same error each time.
    Please specify what is the problem?
    Yesterday, I used these labs without all the problems.
    I added the site in the zone of confidence. also all of the custom software add-ons necessary have been installed.
    Thanks in advance.

    Hi AndriiKyianov,

    Thanks for posting your question in the Microsoft answers Forum. Your question about Lync Server 2010 it will be better answered by experts in the Lync Server Forums. Please repost your question here.

  • Blu - Ray player installation problem: lack of VBScript

    Hi people!

    After you download driver bluray such as recommended by the notifier of Toshiba, I have trouble to install.
    After that I ran Setup, I get 2 windows with the following notifications:

    1, first: can not find the VBScript script engine for script... TC3052100B.temp\preinstBDV.vbs

    (where TC3052100B.temp referds to the driver bluray itself if I undersand correctly)

    2 and after the closure of the window above, the following text is displayed:
    Can not find the VBScript script engine for script... TC3052100B.temp\BDPlayerSetup_Patch.vbs

    Already, I deleted the old driver and isn't any restore point...

    All operations will run smoothly...

    But how to handle this situation?
    And I want that my hard drive to function...

    Thank you much in advance,

    > After download bluray driver such as recommended by the notifier of Toshiba, I have trouble to install.

    Toshiba notifier? You mean Toshiba Tempro software
    I don't know what model of laptop you have and if your laptop is equipped with a Toshiba Bluray player but I guess you get this error because your computer laptop isn't capable blu - ray player and the Blu - ray Toshiba player isn t preinstalled.

    The point why you this notification is simple: there are different laptops with different hardware configurations. But the Toshiba tempro does not recognize if your laptop needs this software. TEMPRO shows you the drivers/tools/utilities that brought to the whole laptop series and have been uploaded to the Toshiba driver page.

  • I have problems with my DNS does not. It happens every day.

    I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

    original title: DNS is not responding


    1. what operating system is installed on the computer?
    2. were there any changes (hardware or software) to the computer before the show?

    Method 1: Perform the steps mentioned below and see if the problem persists.
    a: click on the button "Start".
    b. in the search box, type "invite."
    c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    d. at the command prompt, type ipconfig/flushdns.
    Method 2: Click on the link below and see if the problem occurs.
    Method 3: Click on the link below and see if the problem resolves.

    Hope this information helps.
  • Siri having problems with the connection.


    I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

    I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

    I have the right connection with Internet with WIFI and 4G data stream.

    I did reset network settinjg, but I don't see any improvement.

    Please indicate what I can do and if it's a common problem with the iphone 6.

    Thank you!


    After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

    I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

    Good luck to all of you who have the same problems with their iPhone of hares!


  • Recurring Server primary DNS does not.

    My PC (Windows 7 x 86) problems of connection to the internet. It connects for a few hours, but sometimes it disconnects for a few hours due to a problem with the communication with the server DNS - principal.

    I already tried the commands below in cmd:

    netsh int ipv4 reset reset.txt

    netsh int ipv6 reset reset.txt



    ipconfig / renew


    I connect to internet after these, but a few seconds the ping (ping becomes the request timed out.

    I tried already several such as Google and OpenDNS DNS servers and yet, nothing helps, same case my ipv4 and ipv6 DNS can also be programmed to automatically get.

    TL; DR

    Do you have all the commands and even changed DNS. Works for a few seconds but disconnects after a few seconds anyway.


    My other devices are connected to the internet; my PC is connected through

    Cable Ethernet Intel 82579v gigabit network connection, but it uses the most recent driver, with no hardware problem. Also, my ISP said it currently has no problem with the connections.

    Help, please. : c

    Thank you!

    I have connected via the - separate router - and disabled-router inside of my modem everything on time.

    It worked C:

    Since then, and I hope that my PC won't be disconnecting over and over again.

  • Sierra Siri, «I have some problems with the connection...» »


    I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

    Any ideas?

    Thank you


    It's a network problem.

    Check the proxy settings that blocks maybe, or a firewall.

    System Preferences > network > Advanced (for your current connection) > Proxies

    Something there?

  • Siri does not (problems with the connection)


    I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

    No idea how solve the problem?

    I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.



    Hey, thochstrasser. Thank you for using communities of Apple Support.

    It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

    1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

    2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

    3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

    4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

    Have a great weekend!

  • Problem WiFi - no internet / DNS does not work


    I installed Windows 7 64-bit on my T500, and I have problems connecting to wireless networks.

    Everything works fine with cable networks, but when I connect to a wireless network (any network wireless) DNS does not work.

    I can ping and connect to websites using intellectual property, but he refuses to resolve domain names. I checked that the correct DNS servers are beeing used.

    I installed all the drivers provided by the update of the Lenovos system + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but right now I'm more sure what drivers are beta and whats release.

    Software & drivers installed:

    The version of connections access 5.42 build 6JC725WW

    11 b/g/m Realtek Wireless LAN Mini-PCI Express Adapter II (version 2007.2.1103.2009 driver)

    Microsoft Virtual WiFi Miniport Adapter (version 6.1.7600.16385 driver

    Anyone know what this could be?

    Thank you


    I finally found a solution. Looks like there is a compatibility issue with my VPN software and wireless drivers. (even if without using VPN). To disable 'Filter light shrew soft' for wireless Internet works fine - but there again I won't be able to use VPN over wireless who is a problem for me as well.

  • Windows update keeps reminding me with the same updates

    Windows update keeps reminding me with the same updates

    See the article after some troubleshooting for your question:

    http://support.Microsoft.com/kb/910339/en-us >

    Please let us know if it did or did not help to solve your problem.

    UTC/GMT is 22:22 Monday, may 28, 2012

  • I'm having trouble with the serial number

    I'm having trouble with the serial number

    If you are hearing 3 or an earlier version, the activation server was arrested.  Take a look at this page, Download Adobe Acrobat 7 and Adobe Creative Suite 2 products for instructions on how to download another copy of AA3.01 and use a generic serial number.  (For the purpose of the present hearing 3 counts as CS2 even though he was not part of the Creative Suite then.)

    However, if you are using a later version of the hearing (CS5.5 until the current 2015 CC) while the others are right... you will need to contact customer support Adobe because only they have the serial number details.

  • Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I can back into my email account. Is there a way to permanently solve this problem? Thank you.

    Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".
  • I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

    I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

    Hello mpm068,

    Thank you for using communities of Apple Support.

    Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

    1. Choose the Apple menu > shut down.

    2. After your Mac stops, wait 10 seconds, then press the power button.

    3. As soon as you hear the startup tone, hold down the SHIFT key.

      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    To exit safe mode, restart your Mac, but no press during the startup.

    OS X El Capitan: start in safe mode

    Take care.

Maybe you are looking for