I kept receiving error Code 057 A 'Windows Update_dt000' update.

I used the update automatic and even followed a solution of the community to this day still not able to load the update.

Can someone help, please?

Hello

(1) what is the description the updates that are failed?

(2) what are the troubleshooting steps you tried to solve the problem?

I suggest to follow the steps provided and check if it helps.

Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

Method 2: If the issue persists, try to put your computer in a Clean Boot State, then try to install the updates

By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

 

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

Method 3: Manually try to install updates from the Microsoft Download Center.

a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

d. When you are prompted, click open to install the update.

For your reference: You cannot install some programs or updates. http://support.Microsoft.com/kb/822798/

Hope this information is useful.

Tags: Windows

Similar Questions

  • Receive error code 8007040 when windows update is attempted

    Hear the automatic update and the last time an update was attempted received the message cannot be updated and when tried to update race received the error 8007040. This persisted for the last two days and every time I try an update receive 8007040 error code. What can I do to fix this?

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    http://support.Microsoft.com/kb/931712
    "Explains the SFC / Scannow.

    A repair install is the usual solution of SFC/scannow does not work.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    1. run "msconfig" and disable all startup items. Under 'Services', hide all Microsoft services and then disable the others.

    2 restart the computer, and then disconnect it from the network and disable the antivirus/spyware software.

    3. Insert the Windows Vista DVD in the drive.

    4. in the settings window, click "install now".

    5. click on "go online to get the latest updates for installation (recommended).

    6. type the CD key if you are prompted to do so.

    7. click on 'Yes' to accept the Microsoft software license agreement.

    8. in the screen "which type of installation do you want?", click on "Upgrade".

    9. when the installation is complete, restart your computer and try again
    to install the updates.

    NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

    Uninstall SP1

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

    TaurArian [MVP] 2005-2010 - Update Services

  • Error code 80070002 in Windows 7 updates

    K I install the Win 7 updates optional - ex language packs, but they all fail and come up with the "error Code 80070002.

    I deleted temporary files in "Windows - C:\Windows\SoftwareDistribution - downloads & DataStore, some files in the data store could not be removed (DataStore.edb & record logs).»

    What can I do to solve this problem, because it leads me into the wall!

    Specifically , that "temporary files in Windows - Software Distribution" are you referring to?

    80070002 ERROR_FILE_NOT_FOUND
    The system cannot find the specified file.

    Since we do not know what has been removed from C:\Windows\SoftwareDistribution, suggest first reset you update components by running the Fixit here: How to reset the Windows Update components?
    The cleaner method is to download and save the Fixit.
    Then Configure the system for a clean boot .

    Make sure that the native Windows 7 firewall is enabled because the system must be connected to the internet when the Fixit is run.
    Once the system has been started in the pure State, run the saved Fixit, MicrosoftFixit50202.msi and choose aggressive mode. The Fixit will clean the subfolder of Software Distribution, among other operations.
    And the latest version of Windows Update is also installed.
    When the Fixit is complete, restart the system , if you are invited to or not.

    See if the system is able to update now. IF it is possible, then cancel the clean boot procedure and see if it can still be updated.

    If the same error occurs, download, Save , and then run
    Update system (or CheckSUR) analysis tool while remaining in the clean boot state.

    MowGreen Services consumer safety update

  • Photosmart 6520e: error code 8004200b on Windows 10 update failure

    I use a laptop Pavilion DV7 64 bit which my Photosmart 6520e is working. I was on Windows 7 but that you have upgraded to Windows 10 in the last 2 months.

    Updates Windows told me that attempts to install an update to printer ALALA keep failure. The message I get is "HP - Imaging - printing - HP Photosmart 6520 Series - Null error 08024200 × b" cannot install the update.

    So far, I have a solution to this Microsoft after trying various suggestions such as Windows update troubleshooting startup and clean.

    Someone at - it additional ideas, or is it because there is no suitable for my 5 year old laptop Windows 10 graphic driver?

    Gordon

    By disabling automatic updates, you can test the HP the rewritten Microsoft drivers b4.

  • Error code 57 on Windows Vista update

    I used update of Windows Vista to install "needed updates", but he stopped with a big stop sign RED with an 'X' in it and said:

    ERROR
    SOME UPDATES HAVE NOT BEEN INSTALLED.
    FAILED: 1 UPDATE
    CODE 57: WINDOWS HAS ENCOUNTERED AN UNKNOWN ERROR

    It's typical and tedious to Microsoft.  I am flooded with requests to update my computer to IE8, but when I try to download and run IE8 (with or without the special pack MSN) I got error message saying:

    INTERNET EXPLORER 8 CANNOT BE INSTALLED ON YOUR COMPUTER
    IT YOU ARE MISSING SOME UPDATES. PLEASE UPDATE AND TRY AGAIN

    And of course I can't update so I can't IE8 - DAMN these situations of Catch 22 that Microsoft continually puts me in.  I think they must have scientists working on the theory of how long it takes someone to become completely crazy frustration so that they could make a statistical presentation of the scientific community as a breakthrough on stress or something LOL.

    What I need is someone to tell me what him Hey to do this so that I can get out of this endless loop, download the update reprisé (I think that it is Service Pack 1 - real service... not!) and be able to get FINALLY IE8 on my computer.

    You would think after having spent HUNDREDS OF dollars on a new and improved Windows OS it could be at least a semblance of quality but you know what, Microsoft does not even allow one free phone call - well I wouldn't stand behind this kind of work if I created such a poor quality product that every 2 seconds should be updated and then for some reason he can't.

    But * sigh * we are all indebted to Goliath and I am not David so I can't kill the giant, I'll have to try to work with em and see if I get a help at all.

    Oh, LORD, I pray that I get help within 48 hours of sending this (08/01/2010).

    Hi BobVictory,

    The only way was to take the advice of others here, and then we had to also remove all the data, we wanted to record on a secure hard drive, write and find all programs, reformat the whole, perform all updates of Windows, reseating all programs (MS Office, 3DO, Adobe, etc...) and recover data from the hard drive secure.

    I still run Windows Vista Ultimate Pro and not passed to Windows 7, but I just saw that Windows 8 is out, so what's the point? I'll probably wait for Windows 9 or 10 before the upgrade, because they seem to change every year and now my Vista running great, until I update each. Hope you find the same resolution for your computer.

    :-)

  • The Service pack update not receive error code 643. I tried to uninstall and reinstall NET Framework 4 by windows site

    I tried two times to update windows.

    I kept getting error code 643

    I have windows Vista Home 32-bit Premimum.

    I went on the windows site and followed the instructions to the letter establishing the NET Framework 4 and the reatrting my computer and trying to download the service pack again.

    NO progress

    Always error code 643

    Other solutions?

    Thank you

    Vista SP2 is installed?

  • He cannot get set Windows Update to download. Receive error code 80072EFE?

    Original title: Carol

    He cannot get set Windows Update to download. Receive error code 80072EFE.

    https://support.Microsoft.com/en-AU/KB/818018/en-AU how to troubleshoot problems connecting to Windows Update or Microsoft Update

    Do not trust article on the fixit.

  • get error code 80072efe when windows tries to update

    I keep gettig error code 80072efe when windows tries to update can't seem to know what means this code anyone can help

    Hello

    When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive this error code.

    I suggest that you follow these steps/methods of the article below and check if the problem persists.

    http://support.Microsoft.com/kb/836941

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Cannot install the security update. Received error Code 0 x 643. What is it? What should I do?

    Attempted to install

    Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353).

    Not successful installation: received error code 0 x 643.  What is the problem?  Where can I find information to solve this problem?

    Thank you.

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    Use the foregoing as guides to solve the problem.

    If necessary:

    Click on the following link to download the .NET Framework cleanup tool:

    You can use this to check what versions are actually installed on your computer:

    The user guide for the .NET framework installation check tool
    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  • Receive the error code 643 trying to install updates KB2539636, KB2468871 and KB2533523.

    Fix error code 643

    Problems installing KB2539636, KB2533523 and KB2468871.  I get the error code 643.  Can someone help me?  Or point me in the right direction, where I can get help?

    Hello

    • You are able to install some other updates?

    I suggest you follow these methods and check if it helps.

    Method 1:

    Have you tried to install this manuallyKB? If this isn't the case, you can try it? You can download here (the good language):

    KB2539636

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27017

    KB2533523

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27014

    KB2468871

    http://www.Microsoft.com/download/en/details.aspx?ID=3556

    .. .x64 -is for 64-bit Windows Vista

    ... .x86 - East of 32-bit Windows Vista

    How to know if Windows vista is 32-bit or 64-bit is here:

    http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

    Method 2

    I suggest to run the fixit from the following link and try the steps.

    You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
    http://support.Microsoft.com/kb/976982

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • updated creative cloud but receive error code: 87 recently upgraded my os to win 10 What are my options uninstall reinstall

    updated creative cloud but receive error code: 87 recently upgraded my os to win 10 What are my options uninstall reinstall

    update by downloading the files directly and then apply them:

    CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

    updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

    updates CC 2015: http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html

    and for error code 87 patches, installation of cloud creative error 87

  • Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

    Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

    As I said, I'm Windows as well as a few links saved, I have ZERO idea what to do with a Mac

    Link for download & install and installation & activation problems can help

    -Cat http://www.adobe.com/support/download-install/supportinfo/

  • I receive error code U44M1i210 when updating of products CC since yesterday

    All my CC products come back to me the same error code when I try to update since Jan. 12. This is the full message for Dreamweaver: "there was an error of installation of this update. Quit and try again later. Error code: U44M1I210
    Release of Dreamweaver CC - December 2013".

    I tried via the individual product, helps, updated... it still does not work.

    I reported via the Online Chat - they told me that I should call the technical support team. I waited 33 minutes and hang up as I get fed up with waiting - please help.

    I found a solution that worked for me. The PC I was trying for the failure of the update kept any solution I tried. Whenever I tried to update, the progress bar should always start at 51%. Telling me that the download has been done and that the problem lied with the actual files or the ability to extract correctly.

    I asssumed these bad files took place somewhere in my user profile on Windows. So, I opened a session under a different name and this time the update started 0% telling me I was getting a new download.

    So far, I did update through the application itself - help menu... ... And through the application of CC desktop updates.

    I still don't know what is bad in itself, but I know that by connecting to another user, I was able to get a clean download and a successful update.

  • Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

    Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

    Have you tried turning off and back on again?

  • Error code: 0x800A0046 while windows update sites access & installation of updates... ?

    Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution of the error code: 0x800A0046".

    To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

    1. Click Start and run, type Dcomcnfg, and then click OK.
    2. Expand Component Services and then expand computers.
    3. Do right click my computer and then click Properties.
    4. Click the COM Security tab
    5. Under access permissions, click on change by default.
    6. Check that the following accounts are listed:

      On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

      The collapse of this Expand table this table
      Account name Permission type Permission
      Gites, administrators or a user who belongs to the Administrators group Local access Allow
      System Local access Allow

      On clients based on Microsoft Windows 2000

      The collapse of this Expand table this table
      Account name Permission type Permission
      Directors Local access Allow
      System Local access Allow
    7. If either of these accounts is missing in the access permission box, follow these steps:
      1. Click Add, click Advanced and then click locations.
      2. In the location box, click the Local_Computer_Name and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK twice.
      5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
      6. Repeat step 7 for all accounts that you just added, and then click OK.
    Step 2: Check the DCOM default properties
    1. Click the default properties tab.
    2. Make sure that the following configuration:
      • The Enable Distributed COM on this computer check box is selected.
      • In the default authentication level box, the connection is selected.
      • In the default impersonation level box, the identification is selected.
    3. Make the necessary changes and then click OK.
    4. Restart the computer.

    Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

    1. Click Start, click settings, and then click Control Panel.
    2. Double-click Administrative Tools.
    3. Expand computer management, and then expand local users and groups.
    4. Click users.
    5. In the right pane, double-click the account that you used to log on the computer.
    6. Click on the Member tab of.
    7. Click guests, click on remove and then click OK.

    Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

    1. Click Start, run, type cmd, and then click OK.
    2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
      SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

      Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

    Windows 2000-based clients

    1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
    2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
      C:\Program Files\Windows Resource Kits\Tools
    3. Click Start, run, type cmd, and then click OK.
    4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
    5. Type the following command and press ENTER:
      Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
    Step 5: Check the local security policy

    Notes

    • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
    • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
      810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
    1. Click Start and run, type gpedit.msc, and then click OK.
    2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
    3. Click user rights assignment.
    4. In the right pane, double-click on impersonate a client after authentication.
    5. Verify that the Service accounts and directors are included.
    6. If the Service account or the Administrators account is missing, follow these steps to add the account:
      1. Click on add a user or group, click Advanced, and then click locations.
      2. In the location box, click Local_Computer_Name, and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK three times.
    7. Restart the computer.

    Step 6: Enable the persistence of user data in Microsoft Internet Explorer

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Security tab, and then click Internet.
    4. Click on custom level.
    5. In the settings dialog box, scroll down to the Miscellaneous section.
    6. Under the Userdata persistence, click Activate.
    7. Click OK two times.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

Maybe you are looking for