I'll lose data from the drive of the partition during recovery?

Hi all

If I use the toshiba recovery CD to format my system, I'll lose data from the disks partition as well or just the C:?

Hi Justin

Well, what recovery CD you want to use?
As much as I know several months Toshiba uses a new version of the CD recovery called Reco.
You will find the settings option and there you can choose the option when you want to recover the operating system. I think that the first partition is erased.

The old version of the recovery CD has supported two different options: standard and expert mode. Here it is important to use the expert mode if you want to choose the partition where the OS must be installed

Tags: Toshiba

Similar Questions

  • Move the data from the partitions again tablespace - direct table filled by ETL

    Hello

    We have a large composite table date-range/hash partitioned table (using time partitioning 11.2.0.3 range)

    1 partition for each month and each such partition 4 under separate partitions.

    We want to move some data from most significant storage but also direct table and inserted in all the days as part of the data warehouse and large table want to ensure

    operations below result in errors in the data loading procedure

    Suppose also should not take long to run lines 40 million or more each month.

    Select *.

    Of user_tab_partitions

    Where table_name = 'CUSTOMER_TRANSACTION '.

    And nom_partition like 'SYS % '.

    1. (1) Alter table retailer_transaction and rename partition < nom_partition > CUST_PART_ < YYYYMM >

    1. (2) tablespace create dedicated for the month of the affected partition

    1. ((3) alter table retailer_transaction move tablespace subpartition < sys... > < partition_tablespace > created in 2) above

    ALTER table retailer_transaction change the default attributes for the partition < CUST_PART < YYYYMM > < tablespace in 2 above > tablespace)

    4 global index which would eventually rebuild afterwards due to the transition if movement makes no valid.

    Several local bitmap indexes that belong to partitions.

    Thoughts?

    Thank you

    I agree in a good store of data, everything should be according to the best practices ETL or guideline. I guess it is a FACT table, because it's big enough. A method that I can share (followed in the real world big DW) is "ELP" IE Partition Exchange loading. You can find the basic architecture of the Internet.

    The basic architecture is as

    The source (in your case partitioned) Table--> (unpartitioned) intermediate Table--> Table possible target (partitioned)--> the cleaning activities (and overtime).

    You can use any ETL tool for this (I won't mention any other reasons).

    Later, you can delete the original table and use that new table as your FACT table, your application will be available all the time. There are drawbacks as most uses of double-spaced, other than normal ETL these work will take certain amount of resources so that other ALS etc. In addition, if you load a few current days during these activities you plan / program accordingly.

    Your demo is also fine, but regular ETL may fail because you rename the partitions (some uses of ETL tool partition name, in case you ever ELP) also unusable global indexes can cause failure (you have local too?).

  • Disadvantages of the default tablespace using to store data from the partitioned table?

    Can someone tell me, are there disadvantages, performance problems using default storage in oracle?

    I not create any tablespace during the creation of the database, but all the data partitioned in a tablespace named 'USERS' default... I will continue using the same tablespce...? I'm storing the data in the table where the growth of the table will be great... it can contain millions of records...? It will produce no degradation of performance? Suggest me on this...

    Different storage areas for administration and easier maintenance. In some cases for performance reasons so different disks are representative to the database (fast and not so fast, different levels of raid...)
    For example if you have several diagrams of database for different applications, you may want to separate schema objects to different storage spaces.
    Or, for example, you want to keep in database read-write tablespaces and just only read. Read-write tablespaces with the data files will be on very fast disks, read only the cheaper and perhaps more slowly (not required). Again separate tablespaces makes this very easy thing to do.
    Or you would like to keep separate indexes from tables and keep them in a different tablespace on the different mountpoint (disc). In this case probably better is to use ASM, but it's more than a reason to separate.

    And in your case-, it may be easier to manage if you create a new storage space for these new objects.
    For example:
    1 storage space for small tables
    1 storage space for small index
    1 storage space for large tables
    1 storage space for large index
    and so on. All depends on your particular architecture and database data growth and what you do with these data after a year, two years, three...

  • Retrieve the data from the merged Partition

    Can I recover data from the partition that was merged with primary or C?

    Hi satpalsingh.chouhan,

    Is there any way to recover the data merged into the partition.

    There are many third-party programs that could help you in the task.

    You will need to use your favorite search engine to find such a third-party program that could help you in the task.

    Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • transfer data from the SD card to the Thunb drive

    How to transfer data from a digital map that is blocked to a USB key?

    Bob

    The same way you copy data from any drive to any other player.  Do not let the name of Secure Digital (SD) stupid - there is nothing special about a SD card, storage is the same as a USB is.  Simply copy the files by drag-and - move or by using a command prompt and a utility like ROBOCOPY.

  • This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

    This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

    Hi Alan,

    Thanks for posting in the Microsoft Community.

    I understand you are trying to backup the data on external hard drive since you replace the hard drive.

    I will definitely help you with this.

    Please visit the links; This should help you in files and backup files.

    How to use the backup utility to back up files and folders in Windows XP Home Edition

    http://support.Microsoft.com/kb/320820

    http://support.Microsoft.com/kb/308422

  • Unable to transfer data from the laptop hard drive external/pendrive.

    Dear Experts,

    Unable to transfer data from the laptop hard drive external/pendrive.

    Each time that tried to transfer meesage seems to the authorization of the administration.

    Kindly help me to solve the problem.

    Concerning

    Hello

    Follow these steps and check:

    To take ownership of a folder

    a. click on the USB key you want to learnand then click on Properties.

    b. click on the Security tab, click Advanced and then click on the tab owner.

    c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d. click on the name of the person you want to give to the property.

    e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

    f. click on OK.

  • How can I get the data from the drive of barcodes to forms

    Hi Experts,

    Forms 6i

    I would like to collect data from the barcode scanner.

    No idea if you got it please share.

    Thanks in advance.

    Hello

    I think that his works even as the keyboard.  You type the code manually or you can read it from a scanner.  With the help of the keyboard that you can able to type what anyone on the position of the cursor, in the same way the barcode scanner also works.  Just like a copy and paste the scanner copies the data from the physical device and paste it into your corrent cursor position.  There is no separate program encodings necessary for this work.

  • Transfer of data from IDE drive to SATA Drive

    I have an old HP PC with an IDE hard drive, running windows XP.  I want to transfer data from hard drive to a newer HP Pavilion computer on windows Vista. Need instructions on how to transfer the data and what toos hardware and software are needed.

    Details of the recent PC (target PC) are:

    Type of hard disk: SATA.

    Model - A6160e CTO desktop PC / product nbr - gg754av / serial number MXG73501SZ.

    More old HP Pavilion PC:

    Hard disk type: IDE

    Preponderance of details:-cannot read the label! (about 7-10 years) [old and gray - sound like me!]

    Thank you all

    NY11563

    E-mail: [email protected]

    Hello

    There are limited resources,

    (a) use Data transmission cable, something like one of the following thread:

    http://au.price-selector.com/search?k=easy%20transfer%20cable & cid = 1-3-1-1-3

    (b) another option: buy an IDE HARD drive case and put the old HDD on it, you can transfer data and use it as a HARD drive external.

    Kind regards.

  • Transfer of data from the old and new Mac

    Hi folks, I'm acquires a new iMac, PC (with Retina 4 K display 21.5 inch iMac) to replace my current iMac (21.5 inch, mid 2010). I sold my existing iMac and will have to ship power off before receiving the new unit, ergo, I won't be able to use the method of transfer of my data from the old to the new Mac.

    Accordingly, I am looking help form to advise me how can I do to preserve my existing Mac data so that I can install on the new Mac. In addition, how to delete all my data from the old Mac but preserve the OS X (El Capitan) and relevant applications.

    All of the advice and recommendations will be greatly appreciated

    1. create a Time Machine backup or clone bootable on an external drive, and then migrate your data from it.

    2. you need to remove El Capitan of the old Mac before send you it off and return it to the most recent of its original operating system or 10.6.8.

    (137493)

  • VI do not transfer data from the instrument.

    Hello to all who are interested.  I'm working on an instrument driver for an Agilent D3000A generator of signal (E4432A) trying to get the generator to sweep the amplitude of - 30dBm to-75dBm and then come back in a loop.  The loop is in a structure of the event and is called by a switch on the front panel.  When the switch is selected event triggers and loop information is passed to the VI.  The problem is the 'Sweeping Steps' VI does not use data from the number of points in the sweep and pause at each time and the tracks of the loop as the amplitude is just switching between the min and Max amplitude levels.  But once I have stop the generator program will continue sweeping (only in a sense) but the correct time and the number of points.  When I use the spy "measurement and Automation Explorer" program AND I do not see that the data are transferred in the instrument.  I don't know if the Subvi the execution order is correct and was amazing if someone could take a look and let me know if I have them in one order incorrectly.  Could not find an example of this type of program examples of the driver so there is little help.  I joined the program and the driver of instruments for your comment, then please take a look and send any information you think will help me to get this working properly.  I have also tried to run the single sweep mode sweep and have just the change of direction for the sweep to the other side of the ramp, but I still get the same results.

    The generator has 15th and ONU3 options.

    I, m using LabVIEW 2010 on a Dell Dimension 2400 running Windows XP and service pack Version 5.1.2600 Service Pack 3 Build 2600.
    Please let me know if you need other information.

    Thank you

    Just for the short term, right click on the structure of the event, select Configure the events managed by this case and uncheck the lock front panel.  Also, I don't know if you caught my edit.  I think your problem is your expectation (or lack of).  At your expectations to be slightly more than the number of steps to multiply by the pause time.  You must leave the instrument perform its scanning after all.

  • Recovering data from hard drives of laptop data

    1. laptop computer work with a hard drive to work (I know that this is the case if you insert the disc of the laptop, it works, it loads windows xp, you can use the laptop according to the normal without errors / problems etc.)

    We have a disk external drive kit (again I know works as I use to connect to a multitude of other hard drives via the USB port of a desktop PC) and I have another kit to different hard drive for the first USB SATA hard drive recovery kit and it does the same thing when you try to access the data on the hard drive for laptops

    If I connect the laptop hard drive to my desktop PC it won't appear in my computer even if you right-click my computer--> manage--> disk management

    The drive appears here as not initialized and will fail if you try to initialize the disk indicating there CRC errors and it will not assign a drive letter.

    Is there a quick way to access the data on the disk?

    As much as I know readers are not encrypted as when loading after the bios POST, you get not all blue / violet loading gauges, this is Windows XP SP 3 so do not use bit locker or something like that.

    What should I do to get access to data as quickly as possible without making too many steps or waiting for utils recovering data, etc..

    Also, what do Lenovo for the drives causing headaches as much?

    Am confused with your part external kits...

    In any case, I assume you have a computer laptop lenovo work and office work. You try to connect lenovo's HARD drive in a USB drive kit and extract data from the desktop.

    (1) is the disc encrpted HARD lenovo? Check the Bios and also if lenovo security software are installed.

    (2) the fastest way I'm doing it today is to connect laptops and office to a network. Share the disk, and then extract the data from the laptop or desktop. A second option is remote laptop and retrieves the data.

    (3) another possibility is that your laptop is XP, IE the formatting isn't AHCI (check the bios under sata), it is in compatibility mode. The Office use Vista or Windows 7?

  • USB ports do not work, although I can charge my phone with the computer, it wont let me view my data from the phone.

    I had my computer about a month ago and it was working fine. But then, all ports usb stopped working on me. Although I can charge my phone with the computer, it doesn't let me see my data from the phone. I've tried everything.

    I'm guessing that this problem came from me turning off the computer by disconnecting it instead of turn it off manually.

    Help, please.

    Hello


    1. what happens when you try to connect any USB device to the computer? You receive an error message?
    2. What problem is specific to any USB device or all devices?
    3. what troubleshooting measures have performed up to now?
     
    Do the methods and check if it helps.
     
    Method 1
    Try to use the phone on another computer and check if you are able to access the data. If you have the same problem on another computer then the problem is with your phone. If you are able to access the data, then perform method 2.
     
     
    Method 2
    Reinstall the USB controllers.
    This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
    (a) click Start, then type Device Manager in the start search box, and then click Device Manager.
    (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
    (c) once complete, restart your computer. Your USB controllers will automatically install.
     
     
    Method 3
    Run the fix - it tool and check if that helps.
    Diagnose and automatically fix the Windows USB problems
    http://support.Microsoft.com/mats/Windows_USB_diagnostics
     
    Response with more information to help you.
  • How to transfer data from the 7 Millennium

    How to transfer data from the 7 Millennium

    You will need to manually back up your files by copying and pasting on a device from external storage such as a USB key or external hard drive.

    Then copy them on Windows 7:

  • Is it possible to recreate a link to or to access data from the Delta after the original disk has been changed?

    I did something very stupid, but didn't know what I was doing until it was done. Now I need help.

    I had a server doesn't go down (Windows 2008), no backups. He had two logical drives on two separate VMDK. I decided to mount the drive on a new server and move all data from the old disk (VMDK) to the new computer virtual server. Once done, I realized that the data that I had moved across was 6 months old. Further investigation, I found a car delta for this drive. I reassembled the old VMDK on the old server and carried out a repair. This brought to the top of the old server, but I had moved all the data on the data disk to the new server and so the data on the drive of delta were more visible. My question of course, is "How can I get the data on the disc of delta, which is actually 6 months worth. Does anyone have a miracle solution?

    set the virtual disk cloned on a virtual machine to help. "

    Use an existing virtual machine, change the settings and add/get cloned like an extra virtual drive virtual drive. If I understand your initial post, you have initially with the disc of the parent base.

    André

Maybe you are looking for