I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to

I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to put the "Outbox" folder above the folder "sent". How do I do this ever?

I know that the addon will allow you to rearrange accounts, so you could put 'Local folders' over another e-mail account.
It will also allow you to use files within an account.

So if you have a Pop email account that uses the Global setting of the "Inbox", then it should allow you to move the position of the Outbox within this special account.

But as the 'Outbox' is a 'Local folder' folder, I'm not sure that you can move it out of "Local folders" and reposition it on another account.

The method for moving files is done via the menu bar.
'Tools' > 'manually sort folders ".
Select the folder and use "move up" or "Down" buttons.
Then click on the button "refresh folderpane' to see the new sort order.

Tags: Thunderbird

Similar Questions

  • Surfing the net I want already seen sites to change the color so I don't keep looking on the site even after an interruption

    When they surf the net I get many interruptions, telephone, electronic mail, either, and when I come back to the web feature, I have no idea where I stopped and again display the same sites to the wire. I want these sites to change color once because I know where I started and stopped. Thank you.

    Make sure that you are not Firefox running in permanent private browsing mode.

    To view the history settings and cookies, choose:

    • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
    • Uncheck the box: [] "always use the navigation mode private.

    Also, make sure that you keep the history.

  • OS3 and auto return to look at the face

    Hi all

    until the upgrade, if I was looking at an app, weather for example and then lowered my wrist, the next time I was looking at the watch is automatically back to the face of the watch, not the weather app. Now, this does not work and I can't seem to find the setting to choose this behavior.

    Any ideas?

    See you soon

    Waddo

    Hi Waddo

    On your iPhone, in the application of the watch, go to: My Watch (tab) > General > screen Wake - under the heading 'on screen Wake see the latest App', choose "While in Session".

    If that is already selected, but your watch does not regain the dial of the watch after the use, for example, the weather app, then the following steps can help:

    • Choose a different setting (for example to 8 Minutes of last use), wait a few moments and then change it back to the session.
    • Return the dial of the watch manually (by pressing the digital Crown) of any existing application, open before testing if the change came into force.

    More information:

    https://help.Apple.com/watch/#/apd748b87e2a

  • Thanks for your help. I can look to iCloud by car and see its contents. However I can't iCloud pictures like this to see the content, etc. This is the reason why I wanted to disconnect from iCloud. I had hoped to sign new one

    Thanks for your help.

    I can look to iCloud by car and see its contents.

    However I can't iCloud pictures like this to see the content, etc.

    This is the reason why I wanted to disconnect from iCloud. I had hoped to reconnect and see if I could get then in my photo iCloud content!

    Maybe I have the wrong approach?

    can you tell me if the Photos on my iPad and iCloud photos are one and the same?

    any help appreciated...

    They should be the same.

    To display your iCloud on your iPad photo library you're following the steps below?

    Go to iCloud.com using Safari.

    Keep your finger pressed on the semicircular arrow at the end of the URL bar.

    Press "Ask site desktop."

    Connect to your iCloud account.

    Tap the photos icon.

  • HP Pavilion dv5-1190ej: looking for the original bios version

    After updating the bios that failed, I tried to update the usb drive and bios update completed with the mobile ashuting down.

    Yet it doesn't show anything on the screen after reboot, and no splash screen appears.

    I'm looking for the F.0C version that was before, bad enough there is no backup so that this update was going on.

    Please if anyone can tell me where I can find the original file, to download it would be great. I followed this link http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Computer-freeze-during-BIOS-upda...

    but I need a BIOS is displayed on the screen. the current does not work.

    Thank you very much. Here, I'm desperate.

    Thanks to youtube that I've managed to unbrick my laptop.

    change the names of 3602 to 3603, did the trick.

  • Visit the Sony Blog for a first look at the new Xperia Tablet S

    IFA 2012 is here and Sony SGNL is giving viewers an exclusive first look at the new Xperia Tablet S
    Visit the blog for more information!
    [url = http://blog.sony.com/xperiatablet:1ewwrje0] The Sony Blog [/ url: 1ewwrje0]

    [youtube:1ewwrje0] fI2azyXeync [/ youtube:1ewwrje0]

    If you want to be the first on your block to have one,
    Pre-orders begin today at
    [url = http://store.sony.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10551&storeId=10151&langId=-1&identifier=S_tablet_landing&SR=tab:store:brand_bin:tablets:ss:1cw8mlrw] The Sony Store. [/ url: 1cw8mlrw]

  • Satellite U500 (PSU9ME) - I am looking for the display Windows 7 driver

    I'm looking for the U500 PSU9ME video card driver. My Windows 7 32-bit operating system

    Please help me...

    Hello

    Have you checked the Web from Toshiba site?
    I don't think because there, you can download it: ;)

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    Laptop-online Satellite > Satellite U series > Satellite U500

    Check this box!

  • I have an external display and close my macbook, and still be able to look at the screen and work

    I have an external display and close my macbook, and still be able to look at the screen and work. Currently when I close the screen closed macbook.

    You must ensure that you have an external trackpad and a connected external mouse/trackpad.

    https://support.Apple.com/en-us/HT201834

    http://lmgtfy.com/?q=close+MacBook+lid+while+using+external+monitor

  • When I open the dashboard it closes and opens up safari to a link of farmville. How can I fix it?

    When I open the dashboard it closes and opens up safari to a link of farmville. How can I fix it?  It's been since ages... thought that updates system could possibly set

    iMac 21.5, end of 2012

    This procedure will reset the configuration of your dashboard to the default value.

    Back up all data before proceeding.

    Please triple - click anywhere in the line below on this page to select:

    defaults delete com.apple.dashboard layer-gadgets && killall Dock

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Launch the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

    Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

  • Looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE"

    Hello

    I am looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE".

    With the help of Bing or Google gave the text of this license.

    I am looking for the text of the license, because I have a piece of source code that has the following file header and I would like to know what are the exact conditions for the use of this source code.

    //
    Copyright (c) Microsoft Corporation.  All rights reserved.
    //
    //
    This source code is under the Microsoft Shared Source license
    Version 1.0 for Windows CE.
    For a copy of the license, visit http://go.microsoft.com/fwlink/?LinkId=3223.
    //

    Unfortunately, the link is dead.

    Kind regards
    Mark

    PS: Yes, I know that my question is not a perfect match for this forum but the Microsoft Ribha Customer Service Representative (manager is Lalita) recommend to post my question here.

    The license can be found here:
     
     
     
  • How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

    How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

    Hello

    Troubleshoot camera connection
    http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

    You probably need to recharge the device drivers and camera control software (usually included
    with the drivers and installed at the same time).

    Login as an administrator.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Manually look at the sites of the manufacturer for drivers.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ----------------------------------------------------------------------------

    Check with the Sony Support, their online documentation and drivers (update or reinstall).
    and their forums.

    Sony - Contacts
    http://eSupport.Sony.com/us/Perl/contact-land.pl

    Sony - drivers
    http://eSupport.Sony.com/Perl/select-System.pl

    Sony - Support
    http://eSupport.Sony.com/

    Sony - Forum
    https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Microsoft never takes a look at the error reports I send?... it doesn't seem that you do because nothing is solved and I get the same error reports!

    I've been having problems with my computer, I continue to send error reports, but apparently, no one throws a look at them at the other end, because I keep having the same problems.  Is there really someone in Microsoft who take a look at the reports we submit?  I would really like to know!

    If you see messages like this:

    Please inform Microsoft this problem

    We have created an error report that you can send to help us improve Generic Host Process for Win32 Services.
    We will treat this report as confidential and anonymous.

    Send error report do not send

    I wouldn't count on return all useful 'response' of MS because allegedly they do not have any of your information (so how would then be able to communicate with you?) if they do not have your information, they say they will definitely preserve confidentiality, but maybe one day your contribution will help the best ways to handle errors and respond in a way that actually works to understand.

    If you choose to send things, don't forget to give long enough the process — sometimes several minutes and you will get a message back that may or may not be interesting to read, but they are usually generic "Thank you for your comments" type messages.  Sound familiar?

    If it is a known problem with a solution, you can be lucky and get some tips on how to solve this problem, but I wouldn't count on it and have never actually seen it work out that way, but I could at least give the error notification mechanism a chance and see what he has to say.  You can also find out more about works XP when you are finished.

    Some people feel that potentially sending your system information (and who knows what else) Microsoft is an intrusion into their privacy and choose to disable the function of «»  Who knows what information you send to Microsoft when you click send error report.

    If you want to know how to disable this feature, let us know and I'll tell you how.

    You probably better to solve your problem in the system the old fashioned way... by yourself (and with the help if you need it), I would like to ask a new question in the appropriate forum.

  • Whenever I click on a shortcut, it goes directly to Windows Media Center. Even when I click on the internet or try to look at the files. Help, please!

    The Windows Media Center has things where I can watch vidoes watch pictures and movies and tv watching sport and see my tasks and extra.

    When I look at the title of the property, in general, the file is called: ehshell.exe

    It is by Microsoft Corporation any accident about 2 months ago that just, it started showing the Windows Media Center.

    Help, please!

    Hello

    Run this fixit:

    http://support.Microsoft.com/kb/950505

  • Look at the of my W500

    This may seem obvious, but where can I get the original for my W500 bought in 2008 specifications? I recently had to have my screen replaced and the local repair shop, I went with replaced the screen with a 1280 x 800 max resolution screen - I'm sure I could use 1920 x 1200 with the original. I want to have my ducks in a row when I come back and call them on the lower screen, they've installed. I have the Service and troubleshooting provided with the machine and it says ' resolution: 1920 1200, 1680-by-1050, 1280-by-800. All three resolutions are supposed to be available as an option? Don't pay a premium for a higher resolution? Thanks in advance for any help.

    Hi and welcome to the forum!

    What is the number of products of 7 characters of your W500? It looks like 2668-KHU and can be searched back sticker.

    If the model ends with the CTO, you should make the parts search to discover FRU of the screen manufacturer which accordingly will lead by helping find the maximum resolution of your W500.

    Keep us informed.

  • I ran the tool Microsoft Support Emergency Response and rate by looking at the report. Is there a way I can see him again?

    Led by Comcast, I ran the tool Microsoft Support Emergency Response and failure by looking at the report.  Is there a way I can see him again? Thank you.

    original title: report of ODILE

    http://support.Microsoft.com/kb/2520970

    read this.

Maybe you are looking for

  • First boot of Windows after Windows-10 updated

    Hey, if I run Windows 10 on my MacBook Pro via Boot Camp 2015 retina. A few days ago I installed upgrading big anniversary for Windows 10. Since then, whenever I start my MBP, it always tries to start on Windows first for some reason any. I always ha

  • Option 'Block' clicked by mistake now can't see the Web site. How can I cancel

    Stupid, I know, but I clicked the option "block" on the screen and then accepted. Now cannot view the site and don't know what to do to fix this.

  • Driver Conexant SmartAudio HD (CX20722) problems

    Hello I had some problems in recent weeks with my Conexant HD SmartAudio (CX20722) in my Dell Inspiron 13 7359.  In general, my sound works great after the occurrence of a full stop.  If I restart my computer after that, no sound speakers.  When I op

  • Lack of Midi synthesizer in Windows 7?

    I have connected a keyboard CME M - Key Midi by USB on my laptop ASUS.  I have updated from Vista to Windows 7 when I bought it two months ago.  The keyboard indicates that it works but no sound.  Y at - it software midi synthesizer installed in Wind

  • BlackBerry smartphones «Service not enabled for this handheld»

    Okay, so I try to connect to AIM and MSN/WLM, but I get this message: «Service not enabled for this handheld» I'm honestly not very fluent in the language of the phone and I'm new to BlackBerry. So if anyone can help me it would be really appreciated