I lose my Internet on my XP computer when the printer is connected to wireless.

Similar Questions

• My 3070 and says he can print t! Same IP address on the computer and the printer. What can I do? CC = is

  My 3070 and said that he can´t print! Same IP address on the computer and the printer. What can I do?

  Hello

  Try to download and run the utility of diagnosis of printing located here. Let us know the results.

  Good luck!

• HP Deskjet 3050: Hp Deskjet 3050 how scan from computer to the printer?

  Since I can't print

  I was wondering how I could scan as to place the paper and scan from the computer?

  Isn't this possible?

  Thanks for the reply

  Sabrina33 wrote:
  ... I was wondering how I could scan as to place the paper and scan from the computer? ...

  Hello

  No, you cannot scan from computer to the printer. You have to put original on the glass and you can use the HP scanner on computer software to scan and save a document/photo scanned on computer.

  My question: do you have installed the software and driver on your computer yet? You should do this first.

  Kind regards.

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Unable to connect an epson printer all in one to this computer, even if the printer is connected to other computers on my home network

  I get an error when the installation disc connects who says that my computer is not compatible with the program, however, I have another computer running the same operating system on the local network

  Hello

  What is the printer model number?

  In the error message, the driver is not compatible with the computer.

  I suggest you contact the manufacturer support for drivers that are compatible to run on Windows XP computer.

  Epson support

  http://www.Epson.co.UK/support

  As a solution I suggest you read the following article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Hit to the broad area when the server is connected to the internet

  We have a new server running windows standard server 2008R2. When the server is connected to the internet, the computers on the domain are faced with offshore and they receive the error message saying "Unable to connect to the database". How we solve this problem?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• Computer recognizes the printer, but does not install

  Original title: printer / driver problem

  My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can follow this link completely and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

  Original title: computer viruses.

  If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

  Hello

  to be Safe side scan always media files are on before you reinstall your data

  using drives flash etc is a well known to transfer viruses, etc.

• HP officejet6700 no connection of any computer to the printer

  I bought the printer at the beginning of Feb. 2014 everything was working fine until yesterday, all of a sudden I get the message that I can't print or scan, and it's the same for all the computers in our House. All computers and the printer are connected through our wireless router.  I run the doctor print and scan, but it did not help. And I can not connect to hpconnected more it gives me just a mistake.

  Hi lydemar,

  From what you described, this looks like a problem with the wireless connection. I have found a document that you can use to troubleshoot with these symptoms. "Printer is off-line" Message appears on the computer and the printer does not print.

  Although you may not see a message 'offline' this document will guide you through the steps required to solve the problem.

  I hope this helps.

• Can't connect the computer to the printer wireless to work

  My HP 1102W works fine computer fron 1 (Win7). He has already worked on computer 2 (Vista Home Prem 64) but for some unknown reason, collapsed connect to it.

  I tried to reinstall, and during the installation, I get an error message "cannot find printer on the network.

  I can access my router since this computer so my network to the router link is good.

  The blue light on the printer is on while the printer is connected to the network.

  The printer works perfectly if I connect with a USB cable.

  Help, please

  Robert

  Printer not found when installing wireless network in Windows, try here

  http://support.HP.com/us-en/document/c02731427

• dleecom.exe has been removed and know my computer and the printer can not communcate between them, what I can do

  in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine

  Flight23,

  Run first remove print jobs to remove all blocked the queue print jobs.

  Unplug your printer,

  Start, Panel, programs and features, your printer, uninstall.

  Restart your computer.

  Make sure that the printer has been deleted. Driver Manual printer removal

  With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  Is this even possible and server display does not store this information?

  Best regards, Najtssob

  This information is stored in the registry of the virtual office. For more information, see this page: use the VMware View Client information.

• CQ57-229WM portable computer does not connect to the internet. LAN doesn't wake up when the cable is connected.

  With the help of a mini switch to connect all the computers in my home. Painted the room and unplugged the switch of the surge protector. Never feel the wired connection on the laptop won't work. It does not even show the LAN in the Device Manager. My WIRELESS card is there, but not the eithernet. Tried reloading driver computer and online. Performed a system restore and system recovery. Spent 2 hours with the help of HP, but was unable to come up with a solution. Internet connection still works with other computers. Someone at - it ideas?

  Hello:

  Unfortunately, HP does not have manuals containing the BIOS for their notebooks to consumer based settings.

  So I suggest only looking for these parameters if they are available anywhere in one of your menus of the BIOS.

  1 LAN power saving Mode. Make sure it is set to off if you use the local network with your laptop NOT connected to an electrical outlet.

  2 LAN/WLAN switching. Set to off to view your map network cable permanently. When this setting is enabled, your wireless adapter turns off automatically when you connect a LAN cable and visa versa.

  If your laptop does not have one of these settings and your NETWORK card has disappeared, then more than likely he suffered some type of hardware failure.

  Paul

• Desktop connects to the local wifi only, when the netbook to connect to internet

  Hello. My netbook and phone connect to wireless internet, no problem with my wifi network. And until recently my desktop computer connected ok too, using a usb adapter. However, I now have a problem. my pc connects to the wireless network, but only locally. Can anyone help please? There must be a setting that I or someone has changed?

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you temporarily disable the antivirus software or firewall and check if it helps:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: turn off Windows Firewall/antivirus can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 2: reset the default router and check if this solves the problem:

  Next to the electric power plug, there is a pinhole reset button. Remove all the cables from your router except the power cord. Press reset button with a PIN for 10 seconds. Wait 10 seconds then unplug the router. Router will be at default values, reinstall using the software that came with the router. You may need to reinstall the software of NIC as well. Then write your password on a piece of tape and stick it to your router.

  Method 3: Try the steps in the link and see if it helps:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Reference: Wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4: Try the steps from the link and see if it makes a difference:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041