I lost all the volume on the Satellite Pro A120

Similar Questions

• Why the Satellite Pro A120 fails to bootload?

  I am trying to unravel Pro A120, a friend he will not run the boot load sequence.

  everything looks OK in the BIOS: recognized HARD (SATA) and CD-ROM (IDE) disk.

  System check is OK.

  I tried to start the CD-ROM and HARD disk by sequencing to boot in the BIOS and you can also select one of them to start using the function key.

  All that happens is that I have a comparable to blinking cursor to a command prompt and wait for the loading of boot sequence start.

  Any help would be appreciated

  Can you start OS installation using recovery Toshiba DVD or original install disc of Microsoft?
  HARD drive is recognized correctly by the operating system installer?

• Noise all by feeding the Satellite Pro A120 from socket

  I am currently part of the sound of my sound card (inside and outside and a PCIMCA sound card that I use) switching on of the computer on the network. Noise is not present at the switching on of the computer by battery or a power supply without land. Please provide a solution...

  Can you please explain how you use the card/s exactly, especially external? What is some external device connected to it?

  By the way: check a little more advanced search option on this forum. I'm sure that here you will find some similar assignments.

• Stay of connector on cable network after having turned off the Satellite Pro A120

  Hello

  The green light from the connector of the network cable to the back of the laptop turned on when the laptop is turned off (no cable is connected).
  It doesn't matter if it's on battery or power. And when it is turned on, the light goes out.

  Any idea?

  Thank you

  KAV

  Hello!

  Is in the BIOS wake up on LAN enabled? Try turning it off.

  In addition an update of the BIOS if you n t to have the latest version.

  Good bye

• How to pass the Satellite Pro A120 adapter?

  My laptop runs on the battery, but now it is only 3%.
  I get a message to pass to an electrical outlet? I don't know how to do this?
  The AC power led is off.

  Help! This is a new laptop.

  I really wonder about this question usually you must simply connect the adapter to the laptop and the device should automatically switch to the main supply and should begin to charge the battery.

  Have you tried to remove the battery and use the laptop with the power adapter? Check it!

  Maybe the power adapter is faulty?  :| ….
  In this case, you must contact the ASP in your country for a control. Probably, the adapter must be replaced.

  Good luck

• Upgrade memory to the Satellite Pro A120-185 PSAC1E

  The original installed memory of 1 GB in my trusty old A120 is now become a bit of a factor limiting and I want to upgrade to the full 4 GB. I checked this site and it says that the memory runs at 533 MHz.

  However, looking at various other sites suggested that some varieties of this laptop can run memory running at 667 MHz - according to its region!

  Anyone knows which is the right speed?
  Obviously, I want to put a faster RAM in it when I update, but if we can't run it, I don't want to waste money I can't use memory especially.

  Thanks in advance.

  Tony

  Hello

  > However looking at various other sites given to think that some varieties of this laptop can run memory running at 667 MHz - according to its region!
  Depends on the FSB (front side bus)

  If the FSB would allow the 667 Mhz, then the modules of memory also would go to 667 Mhz. If the FSB supports only 533 Mhz then your modules will be run max 533 Mhz even though the modules support 667 Mhz.
  Simply said; the FSB can slow down the speed of the memory.

  Welcome them

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Where can I get the adapter for Satellite Pro A120

  Hello

  Anyone know where I can get a dc for a Satellite Pro A120 Jack.
  These seem to be quite rare models.

  I have spent hours searching if google and portions of websites, but just can't locate it.

  Anyone?

  Hello

  All compatible Toshiba laptop parts can be ordered from the local ASP.
  The service allowed in your country could order such a part of Toshiba if it would not be in stock.

  But as far as I know the Satellite Pro A120 needs a * PA3092U-1ACA * AC universal adapter that takes in charge 15 V, 4A, 60W.

  Try to search for this part number on the net and I m you can find deals.

  Greetings

• Satellite Pro A120 - 169 PSAC1E: Impossible to install the 64 bit OS

  Hello

  I have the Satellite Pro A120 (169) model PSAC1E-04X024BT and I inserted 2 x DA-PA3513U-1M2G (Dane-Elec 2 GB SODIMM PC2-5300) memory, so a total of 4 GB of memory.

  I know to have 4 GB in a BONE, you need to run a 64 bit OS.
  But my processor is an Intel Centrino DUO T2050 1.6ghz (Intel Core DUO T2050).

  After reading the manual I was convinced that I am able to run a 64 bit OS... but the time of its installation, the Setup program will not continue... as my CPU is 32-bit...

  Is this true? Or do I have to change something in the BIOS? (Version 3.4)

  Thank you

  Hello!

  Yes, it true s that your processor supports only 32 bit and not 64 bit.
  Here, you check only the Intel specifications posted by redhawk.

  Sorry mate, but on this laptop, you can only use a 32 bit OS.

  Good bye

• Satellite Pro A120-145: yellow typical mark in Device Manager

  Hi all

  I have a Satellite Pro A120-145 running Win Xp Pro fully patched and updated, I have a yellow typical marks against "serial" in non-plug-and-play in Device Manager (when I click on view devices).

  Could someone tell me what driver is needed for this? I don't want to use the recovery disc I made a custom Setup to get rid of the excess baggage which is included on the disc.

  Thanks in advance.

  I used advanced search forum and found that Toshiba post document in some discussions of the forum.
  Please read this:
  How to identify an unknown device in Device Manager?
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Then, you can visit the page of the Toshiba driver and may download the driver for the unknown device.

• Satellite Pro A120 fails to load after upgrade BIOS and XP to Vista

  Help

  I have problems to make my laptop to load the Windows operating system. My laptop (no X6062917H series) was purchased in November 2006. I've recently upgraded the operating system to Windows Vista (Toshiba, Promotion) and was later to upgrade the BIOS of Toshiba.

  This was done via the Toshiba site, opting for the upgrade via the Windows option. Since the upgrade of the BIOS, I have used this phone two or three times, and now I can't use it at all.

  When I turn on the laptop now, all I have is a white screen with the arrow cursor. The cursor moves on the screen that I have spend my finger on the touchpad.

  I welcome any advice on getting my laptop to the top and running, my computer knowledge is limited, please make sure it is as easy as possible

  Thank you very much

  Mr. Gibbs

  It seems that you are using the Satellite Pro A120, which belongs to the series of PSAC1E.

  It seems that the laptop can boot the operating system because the arrow cursor appears on the screen.

  Have you tried to connect the laptop to the external monitor to check if you can switch the display to another monitor?
  It would be very interesting to know if it s a graphics card problem or the internal display problem

  If you will not be able to see something on the second monitor, I recommend trying to reinstall the operating system.
  But if it is not possible to reinstall the operating system, you will need to contact the ASP (provider) in your country for the control of the laptop.

  Good luck

• Satellite Pro A120 - screen upside down

  Hi all I have a toshiba satellite pro A120 and my son took his hand on the keyboard and now the screen flipped over any ideas on what I can do thank you very much...

  Go to the graphics card-> of advanced-> ATI catalyst properties
  Select the quick settings, then the display Configuration tab and rotate the image of the office.

  There should also be a key combination which allows rotation, but it is not known to me

• Fan runs at full speed and never stops on Satellite Pro A120

  the cpu temperature is 30 ° c and the fan is always at top speed.
  I have try all the possible settings of the Bios.
  I can't update the Bios because there is only 1 version of the Satellite Pro A120 and is not possible to replace the existing one.

  Thanks for any idea!

  Have you tested this change in method of cooling in the sleep tool? Make sure that the cooling rack is not dirty and nothing is blocking the vents.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Often, a WiFi on Satellite Pro A120 falls

  Hi all!

  Hope someone can help me here.
  First: sorry for my English!

  I am owner of the Satellite Pro A120. I only use the connection with what is provided by the defined Intel 3945 ABG wireless.
  The machine runs on XP SP2.

  When you are working on the laptop, aswell as on the card battery, every now and then the grave wireless conectivity. Immediately he reconnects. But it is especially embarrassing when I'm on the corporate network, so I work. I immediately make me driven.

  To check if the wireless modem I use, I asked my girlfriend (who is also wireless connected with another laptop) If here connection fails as well whne mine. This is never the case. So, I thought: there must be something with the Toshiba.

  Everyone recognizes this problem and has a solution?

  I already did these things:

  Check the powersaving options are set to off ";
  Updated the driver;

  These actions have not solved the problem

  thnx in advance!

  I found another thread on the same topic that you posted here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=111772#111772

  Because what allows to trace the case, please follow only a single post.