I lost my connection Wireless at home.

I have a time capsule/router.  I lost my connection Wireless at home.  Cannot get internet connection to one of my computers/devices in the home.  Help!

Need to load more information.

Feeding cycle you the entire network... Start up in the correct sequence?

Modem... Wait 2 min

TC... Wait 2 min

Client devices.

If this does not work...

Tell us everything... what model is the modem? Is this also a router?

What model is the TC... The base A1xxx please?

The fact the main TC on... amber green or flashing led?

Taken in a computer by ethernet that get you internet with wired connection, just all the wireless clients are turned off?

Tell us about such things and we can work from there.

But I suggest you a factory reset as well... Here are the basics.

Start from a factory reset. No files are lost on the drive hard in doing so.

Universal factory reset

Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

The installer the TC.

And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

for example TCgen5 for the base station and the name of the TCwifi wireless.

If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

5 attach the TC disc into the computer manually.

In Finder, go, connect to the server in the main menu,

Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

Tags: Wireless

Similar Questions

  • I lost the connection Wireless on my laptop T4200 and can't get it restored.

    I have switched back to indicate that the computer is ready to "receive" a wireless signal, but still no luck. It seems that I've lost a driver. How can it be repaired/replaced?

    Hello

    You need to maybe uninstall and reinstall the driver from the manufacturer's website.

    See; http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • Wireless device detects the connection Wireless at home, but cannot connect to it

    It is a problem that I can not understand. I have a WRT54G Router. My phone can detect the WiFi but my phone can not conect to wireless network. I played a bit with all settiings on the http://192.168.1.1/wireless.htm Web page but can not understand. I think it's a software issue and not a hardware problem.

    Can someone please help? I have appreciapte any help. Thank you.

    Disable any wireless security, including the mac address filtering.

    Change the wireless channel to between 5 and 9.

    Change the width of the channel 20 mhz wireless.

    If this fails, then reset the default router may be required and reconfigure.

  • After traveling with my laptop, I am unable to connect with my connection wireless home

    After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

    Hello

    ·         What operating system do you use?

    ·         You are able to connect through wired network?

    .         You get the error message?

    Follow the steps in troubleshooting from the link and check if that helps:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If you use follow Windows XP KB article troubleshooting steps and check if it helps:

    How to troubleshoot wireless network connections in Windows XP

    http://support.Microsoft.com/kb/870702

    See also:

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Identify and resolve home network problems

    http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  • New MacBook Pro lost internet connection

    Fortunately brought my MacBook Pro retina display 15 "and connected to a Dell monitor. (Hours of hassle, but I have another question/problem).

    After using it for a while, I lost my connection to my home network. But my older MacBook Pro 13 and my iMac 27 were still connected.

    I took the new MacBook Pro 15 "at the kitchen. And here, I got my connection again.

    So... WHY

    And... WHAT can I do to keep my internet/network connection when my new MacBook Pro 15 alongside other computers?

    AND... Is there a use for my Airport Extreme, when my DSL provides internet and network?

    No use of Airport Extreme is not mandatory

    I use Dlink router and modem and all the Apple stuff in our home works very well

    That said-

    Press Option - then click the WiFi icon and click the wireless diagnostic tests - the process of

    If nothing remarkable is found - let it run in the background as you go about your work

    Also, when you do this - take a screenshot of the gray information and post a photo

    Finally two points-

    1. you have indicated this is a new device - is there sufficient numbers DNS for the tour of your router?

    2. do you know if your router provides 2.4 GHz or 5 GHz of bandwidth?

  • IBM ThinkPad T42 would not connect to my home network secure wireless

    Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

    Others have had a similar problem, but I tried the solutions that have worked for them, without success.

    All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

    Windows IP configuration
    An internal error has occurred: a device attached to the system is not functioning.
    Contact support services technical microsoft for more help.
    Additional information: unknown media status code.

    So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

    So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

    Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

    Note: I have Windows XP Professional Service Pack 3.
    Network card drivers, I'm running are:
    Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
    Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

    Thank you!

    Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

    OK, so here is what I did to solve this problem.

    I've updated to the latest version of the IBM BIOS

    Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

    I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

  • Toshiba AT200 refuses to acknowledge my connection wireless home

    My AT200 refuses to acknowledge my connection wireless home.
    1st time, that he could not recognize, I restarted the broadband system and then recognized.

    Now he just continues to scan and will not find the connection?
    I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

    This is a major issue - what is a Tablet without wifi connection - right?

    > Is there a way to reset to the factory settings?
    To reset to factory settings Android, go to:
    Apps-> settings-> privacy-> data reset > reset compressed-> clear all

  • 1312 mfp: How can I make my mfp autonomous 1312 wireless connected to my home network

    I have mfp color laserjet 1312, I want to make it autonomous in the corner to connect to my home network, so we don't have to plug it into the usb every time the family wants to print their tablets of laptop or phone.

    All solutions?

    Hello

    The pritner does not provide wireless features.

    Only if you have the model of card/photo-fax you can connect to your network with an ethernet cable instead:

    http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3558902&docid=emr_na-c01466662&docLocale=en_US

    If you have the model of USB you can connect with a USB to one of your PC and share the pritner with your other computers.

    Shlomi

  • Connected to home WiFi but not Wireless LAN home page

    This morning, everything was fine but something happened with the printer and now my laptop is all out of whack. I used to be connected to my home network where I could access all computers on the network and my hard drive Western Digital World Book Edition II. I don't know how, but now I'm out of the network. I'm always connected to the WiFi which is available in the House but I can ' t do anything else. I can't watch other computers, print or watch the WD hard drive. I tried everything to get me back on the network, but not luck.

    I am using the following:
    -IBM ThinkPad X 41 Tablet running Windows XP
    -Linksys Wireless-N Broadband Router (model number - WRT300N v1.1)
    -Canon PIXMA MX870
    -Western Digital myBook World Edition II (2 TB)

    I did steps 1 to 6, but he says still unknown

    Sorry if I wasn't clear.

    1-6 steps enable NetBIOS over TCP/IP, which is a good thing to do.  These measures do not affect the type of node.  As explained in the link nitecruzr, there is a good reason to make this explicit parameter instead of the default Windows.

    Reset the 'unknown' to 'Broadcast' node type can be performed by following the steps in KB903267 - but it is I think remember that sometimes the steps described in this article do not work and the type of node is still 'unknown '.  What I meant is that it is OK for the type of node be 'unknown '.

  • How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

    Wireless hub works, other computers are connected

    On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

    Recommended by the system solution: reset or repair your access point or wireless router

    How can I do?

    I think that what you aim for is "power cycle".

    To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

    Hope this helps

    Post back if necessary

    ___________________

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

    I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
    I get the following error;
    The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

    I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

    We have several other phones on this account wireless at home.

    You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

    Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

    http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

    This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

    Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

    Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

    Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

    At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

  • Try to configure Windows XP Pro and Vista Home Premium to connect wireless to a field internal.

    Hello. I recently graduated from a COMPUTER course that was very intense, but I don't think that it covered all the basics for me quite challenge the MCSA exams. In order for me to do, I bought a bunch of MS Press books covering ISA Server, Server 2003, Exchange, etc. My journey made us buy copies of Server 2003 and XP Professional, so that we can continue to practice at home.

    One of the things I wanted to do has been implemented a network in my home, using the software I have (not about to try 2008, although I think that one of the books I ordered comes with a version of a test - but it is in a game for the MSITP exams).

    This is how I currently have my network configuration. Currently, everything is wireless. I have 1 spare computer that I use as DC with active driectory.

    Currently I have a router D-Link DIR 655 (located in the basement) which acts as a gateway to the internet server and dhcp on my network and WPA2-PSK encryption use.

    I have a laptop with Windows XP Pro top (that I gave to my wife - old laptop I have baught strictly for the course, I took), and it is completely wireless. It is located on the ground floor.

    I have an office (located on the 2nd floor) using Vista Home Premium 64-bit. It's wireless.

    There is also a network of printers laser color next to the router in the basement, connected via an ethernet cable.

    On the main floor is also my Wii, which connects wireless.

    So, as you can see, it's a mixture of differnet devices connected through my router.  I have the Wii or the printer to connect to the domain specifically. The printer must be accessible to computers on the domain, but the wii should just be able to connect to the internet via the router.

    The spare box I have kicking around, I put 2003 on server and install active directory. I will also implement via this network storage server. I would like to put up to control the accounts of users of my wife and myself and that it uses roaming profiles.

    This works very well when it connects directly through, but how to configure something like this works wirelessly? I read something on another forum in which is setting up a wireless bootstrap, to authenticate against a Radius Server, and then log in to the domain. However I don't have the money to spend to get ISA Server.  The server will be basically be there just to provide roaming profiles and to store things out of our systems, incase we have problems with one of our computers. We could set up something for our own internal e-mail in the future, but since we live in the same House, it seems rather useless at the moment lol maybe set something in the future to let the other note or purchase or to do list. But for now, just want to configure what initially appears to be a single domain with roaming profiles.

    Everyone has tried to do that? Connection of the wireless networks in a field, with a router provides the address and gateway?

    Carlo

    Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 in a domain environment, and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

    original title: Wireless on the Fritz

    I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

    The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

    I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

    Thank you!

    Hello

    You can view these methods:

    Method 1:

    I suggest you to disable any program of security on your computer and check if it solves the problem.

    After reviewing the question you must reactivate the security on your computer program.
    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
    Method 2:
    I suggest also allows you to check in SafeMode with network.
    Method 3:
    I also suggest you to check the settings of the router firewall.
  • II had built my pc cleaned he lost my webcam and I can't connect wirelessly I'm curent

    I paid to have my computer cleaned and lost my webcam and I can't connect wirelessly

    Hello

    Why don't take you back to where you guessed it 'fixed '?

    If you have a wireless network, switch power switch make sure it is turned on

    and make sure you have the latest vista drivers/software for your computer which you can get your computer manufacturers Web site

    go to their website and look for a driver and software download section

    Enter your model number for the last look drivers vista then download and install

    Is the same for your webcam a cam laptop builtin or external webcam: manufacturer of the laptop or the webcam manufacturer's website and search for Vista drivers and software

  • Recently installed vista update. I can no longer connect to my home wireless network.

    Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

    Hello

    Check the firewall it is maybe it has been reset.

    In general.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .


    Jack-MVP Windows Networking. WWW.EZLAN.NET

Maybe you are looking for

  • setting up mac time capsule can't find

    Ive gotten recently used time capsule and I try to make operational. My mac is 2009 with update of el capitan. I followed the instructions from the capsule to the router via a cable and wifi on.

  • Cannot locate the entry point in msvcrt.dll

    During the installation of my program (created with LabWindows 'Building Distribution') on a specific computer, I get the following error: "The point_except_handler4_common of procedure not found entry into the dynamic link library msvcrt.dll." I und

  • E250 does not convert or display video files

    I've got the sansa e250.  Version V03.01.11A.  Not sure on my firmware version, I couldn't find that.  The thing is very new.  I just got it 2 days ago.  I copied and pasted video files for it, but they won't play.  They appear in the file on my comp

  • Alternative Outlook 2007 smtp port number.

    Alternative Outlook 2007 smtp port number. Sending ' reported an error (0x800CCC80): "None of the methods of authentication supported by the client are supported by your server." Outlook 2003 does not have this problem with the same mail server using

  • How to access hotmail

    I don't want to WIN 10... PEROIOD!  I have WIn 7 a good program, I use WIN XP... a big BONE... I do not pay the money Bill Gates each year a program I paid in the past.  How can I access my hotmail account today in my WIN 7 OS no download WIN 10?