I lost my office and files after an automatic update.

Similar Questions

• Lost my office and files after an automatice updating

  I knew that my disk space is low.  I was going to buy an external hard disk to make more space.  Friday afternoon, when I shut down my computer so was eager to install an automatice updating and I don't think anything I just left alone.  I knew that it would be closed after that that he was finished.  Saturday morning, when I went to my computer it was my log in screen ready to connect and enter my password.  When I did it took me to a new office (as when you come back with a new computer from the store).  All my folders and icons that I had disappeared.  My programs are there, but when I click on start, programs, and click on a program such as itunes, it wants to install it as its not already installed.  All my files are not accessible from my profile, sign in.  I am in a panic.  I have so many things that I do not support up to cause its just too many things.  The funny thing is when I go to Explorer and click on all users, that all my stuff is in drive c under documents and settings...  How it make for where I open it my desk top?  And my programs like they were before, so I don't have to go back and reinstall it from the beginning?  My hard drive is always full, so I know it's still there.  I learned my lesson, I'll get an external hard drive today.  Can someone tell me how to solve this problem?  Thanks much for any help!

  You must extract the data files on the computer, starting with the smallest and just a little at a time. Install the hard drive in another computer to do because it will put less strain on the structure of files on the disc...  Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

  Original title: I lost the office and all programs-system restore won't work

  I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  Hello
   
  1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
  2 have you made changes on the computer before this problem?
   
  Please answer these questions and to provide more specific information on the issue. This could help us help you better.
  The following articles could be useful.
  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
  http://support.Microsoft.com/kb/318027
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248

• The site Web from Adobe won't let me go to the cashier and pay after the lightroom update option 5.

  The site Web from Adobe won't let me go to the cashier and pay after the lightroom update option 5

  Use another browser or delete your adobe.com cookies and try again.

• Firefox don't appear or start on my XP PC after an automatic update (12/02/2014?); IE appears but freezes. Always have access to the e-mail. Advice to restore Firefox?

  The morning after the automatic update, my XP PC monitor had a black solid (or was it blue?) screen with only the arrow cursor visible. Move the mouse did nothing except move the arrow cursor. I rebooted and fortunately the Windows logo appears, and I was able to access all the programs I normally use except Firefox. When I click on the Firefox icon in the XP boot screen, the arrow cursor turns into the hourglass. The hourglass stay right there. Firefox can run in an alternate universe, because when I ran CCleaner, I received a message saying that Firefox took a long time to close, and I want to force it to close.

  I'm still able to send and receive emails, which indicates the Internet access. However, with no visible browser, I don't know how to connect to my XP PC Web sites. How can given these limitations, I go about restoring Firefox on my XP PC?

  Thank you.

  You are welcome

• After Windows automatic update, laptop screen becomes completely white

  After the automatic update of Windows, the screen of my laptop to become completely white. I have to Ctrl/alt/del to Task Manager. The bottom of my screen appears, but no wallpaper, shortcut icons, etc. I disabled the automatic update and it seems to work fine. What could be the problem? I am running Vista.

  Following the advice of a friend who had the same problem, I deleted all my cookies. Surprisingly, this fixed my problem. Thank you very much for your help!

• Error message in Outlook 2003"cannot open this item" after an automatic update of the spam filter Outlook 2003 (KB976882)

  After an automatic update which included KB976882 and restart the computer, I can no longer read the emails in Outlook or in the pane to previow, either by opening the item. Sometimes an error message appears "unable to open this item." Some emails appear to be open, but the view pane is empty (transparent). I suspect that it is related to the update of the junk e-mail filter, but don't know.

  You will find support for MS Outlook in this public discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.outlook.general

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Every moment & then my Vista Original fails to start after an automatic update & shutdown.

  I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

  Any Advisor. Should I upgrade to XP?

  Hello

  Make sure that you do not install hardware 3rd party via windows update drivers

  they are normally not up to date and can cause computer problems

  change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ;

• After an automatic update to my Adobe Flash, I'm having a problem when I try to play videos.

  Original title: Adobe Flash issue

  After an automatic update to my Adobe Flash, I'm having a problem when I try to play videos. When I click on the arrow 'play' for a video, that I get this pop-up window that has something to do with having given permission for the site I'm on being stored on my computer. The box gives me two options: allow or deny. Why can't I click on one of these options?

  Hello

  Always get updates directly Flash from Adobe.

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• How can I get my laptop to recognize my printer wireless after the automatic update?

  After the automatic update I couldn't open any program (Word, Excel, internet etc.) that I managed to resolve by restoring my laptop settings before the update. It seems to have worked until I went to use my printer. My laptop will not find my printer through devices and printers, and when I go to print a document, an error box pops up saying "Windows cannot print due to a problem with the installation of the current printer.

  Your help would be appreciated gratefully.

  You must view the windows update history and the KB updates that have been installed, that you believe that the cause of the condition.

  And also to give the brand / model of the printer and the laptop

• Unable to connect after the automatic updates of Windows.

  I have two computers on my network, one with 7 and one with vista.  (US) both for automatic Windows update and yesterday, after both received updates, I couldn't go online.  Restored both and that solved.  Today it's the same thing.  I restored both and Windows updated together on manual.  Problem is I want to install updates, but you need to know what is happening.   Thank you

  Many other people have the same problem after the recent update of Win7.  A thread said that the culprit is update KB2705219 and you'll be OK if remove you it.  There is no other additional information that the user in question has done so successfully [I can't find the link, I checked both of these threads today].

  I have not tried to uninstall it I like my PC to install with a decent connection the last hours [no idea why].  I also have McAfee.

  - - - - - - - - - - - - - - -

  In addition, you should never uninstall McAfee or any other AV application unless you have a copy of the relevant utility uninstall application.  Results to omit this step can be severe and cause quite disconcerting & apparently unrelated symptoms.  I do not recommend this as a step for the problem today, but keep this link for when / if you decide to replace McAfee - McAfee Consumer products removal tool.  For other AV applications, see list of anti-malware cleaning - program uninstall tools

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• 6.3 Lightroom refuses to open after an automatic update Windows 10 Pro

  My computer refuses to open Lightroom 6.3 after my software has been updated automatically by SM.  When I try to open Lightroom, I get a message dialog informing me that Lightroom has been checking the integrity of the Lightroom Catalog.  After 20 seconds of audit, the dialog box disappears and the Lightroom program does not open.

  When this error occurred initially, after the automatic updates of Windows Pro 10, I tried to fix the problem with Lightroom 6.2.1 opting for Lightroom 6.3.  After the Lightroom 6.3 upgrade, I am unable to open my Lightroom program and edit images.

  Hi Robert_Crawford,

  Could you please check the event viewer and let me know for the path of the defective module.

  How to check the event viewer: Photoshop Elements Editor Help. How to find the crash logs on to Windows

  Kind regards

  Tanuj

• Change file name; DW automatically updates all the links that it

  I read on another forum that if a web site links to a file on 30 different pages, for example, and a user has changed the name of this file, so rather than go through each web page and refresh it to link to the new name of the file, DW could automatically update pages to link the file name again. Is this true? It is possible on DW MX 2004? Currently, when I change a file name in a web page, DW shows the image as a gray with a black X square on it, until I have the point DW to the new name of the file.

  If I change a file name in the Dreamweaver files Panel, all references to the file will change automatically

  Yes. Try it. This works.

  or do I then have to go to the Site. Change the link to the site level to change all the links of the old file name to the new?

  N °

  If all goes well, there is a better way to do...

  See comment 'Yes' above.