I lost the CD start to my officejet 5510 all-in-one printer
I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again? Thank you for your help, Sue
You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.
Tags: HP Printers
Similar Questions
-
Hello, my PC crashed and I lost all added programs including my printer software printer works fine, I just need to add the software on the PC. Anyone know where I can get another CD of installation for a HP officejet 5510 all in one printer? HP customer service/tech service wants me to buy a new printer.
Thank you
Hi Sue,
The link below is the full features for your printer software installer - save it to your desktop.
http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
Once the download is complete, double click the installer to start the installation and it will proceed in the same way as if you had inserted the CD.
Kind regards
DP - K
-
No Windows 7 driver for the hp officejet 5510 all in one printer?
Hi I have an old HP OFFICEJECT 5500 SERIES ALL-IN-ONE (the model is 5510). I bought it for my original DELL XP in 2004. He worked especially well when I transferred to my next OS from VISTA DELL (less some functions) but the impression was very good. Now my new DELL XPS 15z Windows 7 operating system is unable to locate a driver for it.
What does that mean? It's such a great printer - that is to say not one disposable. It will not work in this environment? I looked everywhere for a driver (on my system and on the internet). Windows said to contact the manufacturer.
Thank you
Hello
Your printer is compatible with Windows 7 and should work immediately by plugging the USB cable.
As you have a few questions, follow the document below to get your printer working:
http://support.HP.com/us-en/document/c01796879
I suggest you follow How can I make sure that I always have the latest driver for OS Windows 7 first, then plug in the USB cable and check progress.
If the problem continues without change, follow what can I do if the driver installation failed.
Hope that helps,
Shlomi
-
How can I get my printer (hp 5500 series) to print when he always tells me that I have a Paper Jam... that I do NOT!
Help/support on the pages of HP support for your model, review its their printer
http://h10025.www1.HP.com/ewfrf/wc/product?CC=UK&LC=en&DLC=en&product=311255
Or the HP shortcut that was created on the desktop when you installed the full features software
-
Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.
Please notify. Thank you.
If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.
-
you need to install officejet 5510 all in one on windows 7. This disc 2000, xp only
you need to install officejet 5510 all-in-one printer in windows 7. don't have installation disk for windows 98, ME, 2000, XP.
Hello
Unfortunately no driver for Windows 7 on its portal site. Please, use the following instructions to do operational:
http://support.HP.com/us-en/document/c01796879
Kind regards.
-
Still, I crushed my PC it works windos xp. I lost my start up disk for my hp officejet 5510 all in one. Can you direct me to the site that allows me to download the installer for my printer?
Thank you, Sue.
Hi Sue,
You can download the installer for the software complete features on the link below.
Kind regards
DP - K
-
I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing
I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button. I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:
Well, if you haven't tried this and then create a coercive power reset:
Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...
If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.
-
HP Officejet 4630 all-in-one printer print cancels in the workplace
Hello
I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
Thank youThis is how I fixed it:
- Find out what IP address, is that your printer uses.
- Go to control panel, then click "View devices and printers."
- Look for your printer right click.
- Click on "Printer properties" and a new screen opens.
- Along the top, you will see some tabs. Click on the one that says "Ports".
- Click on 'Add Port '.
- Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen opens.
- Click "next".
- Type the IP address of your printer, and then click "next".
Your computer should find your printer.
Click 'Apply' and your printer should work fine.
-
HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help
HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works. I looked for help & tried repeatedly, & am willing to renounce HP.
Hello
Thank you for using the HP Forums.
You can try this alternative solution to Scan:
HP extended Scan
FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
Let us know if it works.
-
OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7
THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.
I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.
Hey 123 problems,.
You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:
http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit
After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.
The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.
The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.
There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.
Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.
I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.
I also tried installing HP Printer Wizard. The result is similar.
Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.
Thank you
Dear Rainbow 7000.
Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.
The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?
After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.
This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.
It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.
Thanks for your help, and I hope this will help other users.
Have a happy new year.
-------------------------------------------------------------------------
Screenshot of the name of the installer:
-
Printing error 0 x 00000709 when I try to make my new HP Officejet e-all-in-one printer default
Print 0 printer error x 00000709 when I try to make my new HP Officejet e-all-in-one printer default. I removed the old printer, uninstalled it, theinstalled HP Officejet (former was an HP Photosmart all-in-one). I rebooted, everything I can think of. I spent hours (overnight) through countless services for troubleshooting. Can someone help me please? Need of college courses
. From Internet Explorer
Original title: error printer print 0 x 00000709
Hi PattiVan,
It seems that you can not set HP Officejet 4620 as default printer, you get the error message: 0 x 00000709.
What is a local printer or network printer?
We will try the following methods and check if they helps us to solve the problem.Method 1: Try to change the default printer value in the registry key and check if it helps.
Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
(a) click Start.
(b) type regedit in start search and press enter.
(c) access the site mentioned below.HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
(d) in the right column, you will find key device, change the value of your printer name.
(e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:(f) right click on the value and click Rename, replace with the name of your printer.
Method 2: Try the steps from the link.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsMethod 3: Let's connect on another user account and check if you can configure the printer as the default printer.
If it works in a different user account, then the user account is damaged.
Refer to this link and create a new user account, copy files to the new user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
I hope this helps!
-
HP Officejet 7310xi all in one: printer keeps repeating transport jam
My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.
Hello
Please visit the link below to fix the problem
-
After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.
Hi @DMT1,
Thank you for visiting the Forums from the HP Support! Good day. I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.
You did your little comments and research before you post your question in the forums of HP. Kudos to you for this. You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.
First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?
Some links that might consult to try to resolve the problem:
I hope this helps. I would like to know how this happens. I hope that the problem is solved without
disputes and the unit works very well. I'm always here for you help. Please reach out at any time.
Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.
Take care now and have a wonderful week ahead.
Maybe you are looking for
-
I can add a floppy disk on the USB device &; should be a special external unit?
iMac I bought from a supplier online external floppy drive & added in my office iMac. The system does not seem to recognize it when I look in the options / hardware of the iMac. Do I have to buy a special disk for desktop iMac? When I start the syste
-
Faster boot SSD for Mac Pro 5.1
The Samsung SM951 AHCI is still the SSD faster that you can boot from on the Mac Pro 5.1? Someone understand how boot from NVMe on the Mac Pro 5.1 yet?
-
How can I detect if a step has been ignored?
In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution? ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomple
-
Why all the elements of the array does not appear?
Hello I'm learning about the handling of tables. The example finder includes this one, 'build array_forum.vi', which shows the two modes, concatenate and adding, I understand, HOWEVER, I can't understand how they built this vi. For example, I can f
-
After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup
After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key). I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7. Any ideas?