I'm a small window that says "object error" that is blocking my computer. How can I get rid of this?
The 'object' error only appears when I access some Web sites. Some sites seem to be OK.
Hi Grudly,
Try the steps mentioned in this link and check:
http://support.Microsoft.com/kb/308260
Tags: Windows
Similar Questions
-
When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?
Could you check this thread started by another user of Linux and see if that helps:
-
Any ideas on how to prevent this arise?
You stop it, you have to solve, or your software will not run tomorrow (did not have weeks of warnings?)
He may be blocked by a firewall, so try turning it off. Or there might be a problem of account - check your Adobe account on its web site. If there is a problem, contact Adobe.
-
And when I try to contact the House (after login) I have to log in again and then my account is not recognized. It is said: Adobe ID and password do not match. Arghhhh!
Hello
For repair, there is no need to uninstall and re install. Just launch Acrobat > Navigate to Help > repair the Installation of Acrobat.
Concerning
Sukrit diallo
-
Everytime I open my MacBook Air with OSLion a sign comes up saying that Firefox is downloaded from the internet. How can I get rid of this sign.
Make sure that Firefox is installed correctly.
Open the Firefox disk image (DMG) file and drag the Firefox program in the folder of the application on your hard drive.
You should not double-click the Firefox application to run from the disk image and drag it out of the DMG file instead. -
I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please
Go to Photoshop forum
-
Firefox starts in 32-bit mode, he says Firefox * 32... How can I get rid of this? Whenever I close Firefox and restart my computer it goes back to normal. There is also another problem associated with which is that whenever Firefox is 32-bit mod I listen to music the sound always comes not as clogged clear. When I restart my computer it is not 32-bit the sound returns to normal. I use Windows 7.
Please note that the 32-bit versions and 64-bit of Windows Vista and Windows 7 can be used to run Firefox 9, only 32-bit versions of Firefox 9 are supported at this time. (see "System requirements" http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ )
-
whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online
Hello
these rogue program names belong to a type of malware using different names but producing the same results
Read and follow the EXACT at the below link removal instructions
Read this information
Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer. When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:
Windows XP rogue namesNames of Windows Vista RogueWindows 7 fake namesXP Antivirus Vista anti-virus Win 7 antivirus XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011 XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011 XP Home Security Vista Home Security Win 7 Home Security XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home XP Total Security Vista Total Security Win 7 Security Total XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total XP security Vista security Win 7 Security XP security 2011 Vista Security 2011 Win 7 Security 2011 XP Internet Security Vista Internet Security Win 7 Internet Security XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011 Follow the EXACT below removal instructions
http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011
-
How can I get rid of this transparent red bar in muse. It's on all of my pages. It is not an object
View menu, "Hide grid on it."
-
When Firefox update 8.0.1 a toolbar in the toolbar items appeared. I can't access the items and I can't get rid of the toolbar. It's big and boring. How can I get rid of him.
Try Firefox SafeMode to see how it works there.
A way of solving problems, which disables most of the modules.
(If you use it, switch to the default theme).- You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
Do not choose anything at the moment, just use 'continue in safe mode.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesWhen find you what is causing that, please let us know. It might help others who have this problem.
-
I've never had to enter a security code of base before emails... it's beyond frustrating; I find them really hard to decipher (they are the kind that look as if they are scribbled on) and had to register more than 10 a few times beofre I understand... How can I get rid of that appears when I try to compose or reply to an email? (My email provider said that's not their doing!)
Make sure that you allow cookies: http://kb.mozillazine.org/Cookies
-
How can I get rid of the TV with the symbol of the camera in my project window, it's too much space.
This is the preview window.
In your support, it is show a folder but if it's a media clip... It is playable (Source Bin overview of monitoring).
Disable it in the drop-down Menu (three bars horizontal bit)
-
How can I get rid of i t and get Adobe Reader again.
Update of Windows KB2918614 to the Windows Installer Service because of similar problems with other software. You might want to try to remove this update (it will be installed near the time you started to have this problem). Restart and try again to install the Adobe application.
-
Please can someone help me get rid of this Nokia_Multimedia_Common_Components_2_5.When I try to cancel it, it comes up with a circle around a red cross telling him that I can't uninstall it as it takes to ovi player and I do not need. It is also it prevents to close properly.
Hello
You can view these methods:
(a) open the Start Menu.
(b) in the white line (search) box, type msconfig and press enter.
(c) click on continue in the UAC prompt.
(d) click on the Startup tab
(e) to disable a startup program
i. uncheck the startup program.
NOTE: Button click on disable all uncheck all startup programs.(f) click OK.
(g) restart the computer and check
-
Although PDF documents open and close normally otherwise, I get of an annoying pop-up message as follows box:
Head: C:\Program Files (x 86) \Common Files\Adobe\ARM\1.0\AdobeARM.exe
Message: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.
I just continued to closing the message only to reappear a few minutes later, if I close it up! Is there a way to get rid of this?
Moved to forum Adobe Reader.
-
When I'm trying to do a disk defragment, I get a message that /f chkdsc. is planned. I don't know what it is, how do I get rid of it or go around it, defragment my disk? Thank you!
When you try to defragment a volume and Disk Defragmenter reports:
Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
Please run Chkdsk /f.This means that the volume that you want to defragment was marked 'dirty' XP. This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.
You won't be able to defragment the volume until the dirty bit has been removed.
This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.
Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).
Entry of commands to reset or erase a disc awaiting review is therefore a waste of time - that is not the problem.
A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination. One of these events?
When XP starts, it automatically checks the bit of impurity on each volume. You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed. If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.
If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.
If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.
You can check the status of your bit of impurity from a command prompt window.
To do this, click Start, run and enter in the box:
cmd
Click OK to open a command prompt window.
For example, to query the bit of impurity on drive C, type:
fsutil dirty query C:
The sample output:
Volume c is dirty
Volume C: is dirtyIs the volume of your sale or it is not dirty?
You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.
The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p). You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.
You will be not also solve this problem by editing your registry database (pay attention technical support engineers and moderators of Forum)-is not the problem.
Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use. The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.
If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.
If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works. If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit.
Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.
You can manually program the disk with error correction check to run at the next reboot of the system, but if the dirty bit has been set, XP should run check disk automatically with error correction during the next reboot.
This is usually the case that after a reboot, the problems will be resolved since XP will automatically run check disk on the Sales volumes when it restarts. If you do not check that the chkdsk results of newspapers after his execution on a restart, you will never know what problems are corrected or remain.
When you choose to run the check disk with error correction in the Tools menu of disk properties, you will be prompted with a message similar to the following:
The disk check cannot be performed because the disk check utility needs exclusive access to some Windows files on the disk.
These files can be access only by restarting Windows. You want to schedule the disk check to occur the next time that you restart Windows?Answer Yes, if you want to schedule the check disk on the next reboot of Windows.
When you choose to run the check disk with error correction in the command prompt window, you will be prompted with a message similar to the following:
The type of the file system is NTFS.
Cannot lock the current drive.Chkdsk cannot run because the volume is in use by another
process. You want to schedule this volume to be
check the next time the system restarts? (Y/N)Answer Yes, if you want to schedule the check disk on the next reboot of Windows.
When XP restarts, let the disc over to check and correct the problems, he could find. Do not interrupt the disk check. It can take a long time (hours or days) to complete or they seem to be "stuck". Be patient. If the HARD drive light flashes, it's something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
If there is a problem with the chkdsk command that works on reboot and it doesn't really seem to do something (too fast) or not to clear the dirty bit (check the dirty bit again), the command chkdsk which took to restart results in the Event Viewer Application log. Look there to see what happened.
When chkdsk runs automatically reboot, you may wonder where to find the results. The results appear in the Event Viewer Application log.
You will need to get there after the disk check performed and XP has finished loading for the results and all the problems.
To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.
A shortcut to the event viewer is to click on start, run and enter in the box:
eventvwr.msc
Click OK to launch the event viewer.
Look in the Application log for a proposed Winlogon event, something like this successful race:
Event type: Information
Event source: Winlogon
Event category: no
Event ID: 1001
Description:Checking file system on C:
The type of the file system is NTFS.
A disk check has been programmed.
Windows will now check the disk.
39070048 KB total disk space.
25151976 KB in 78653 files.
48256 KB in 10264 index.
0 KB in bad sectors.
237080 KB in use by the system.
65536 KB occupied by the log file.
13632736 KB available on disk.Windows has finished checking your disk.
If you see errors - same errors that are corrected, you must run the disk checking with correction of error again (chkdsk/r) until you see no error. You should have no errors. Check again the dirty bit.
If the chkdsk command that runs on every reboot XP does not clear the dirty bit, you must run chkdsk/r from the XP Recovery Console and see if that will clear things upward. It is a good idea because you can watch chkdsk as it works and see the results on your screen instead of looking in the event viewer connects or wondering what happened (she also just 'feels' better when we see that it works).
If you have no authentic XP bootable installation CD to boot into the XP Recovery Console, you can create a CD bootable XP (no XP media required) Recovery Console, and then run chkdsk /r manually.
Need instructions on how to create a CD of bootable XP Recovery Console to run chkdsk/r manually?
Maybe you are looking for
-
I have an old MacBook Pro with El Capitan X software. I want to download iMovie and a few other more recent App´s Apple. I bought a new 6 iPhone and an iPad 2 air, both to these applications. When I go to the App Store and find the missing apps for m
-
Photosmart ink advantage - airprint does not work
I have printer photosmart ink advantage, elitebook 8540w, ipad2 and router tp-link WR941N. Print from my laptop via a WiFi without problem but then my ipad does not see the printer. When I stopped the laptop computer ipad see airprint and the printer
-
When I log on my computer, how can I automatically start outlook express
I've had several people tell me to deposit the outlook express icon in the startup file, but I can't find this file... help?
-
upgrade the HARD drive in v3 - 571 G: what is the maximum height (in mm)?
And: do I need extra / other connections for a SATA-600 HARD disk?
-
MS Office 2007 in final fly - no product key.
Sorry, can not know where to post this. It won't let me choose the categories of operating system and nothing on the desktop... I bought MS Office 2007 ultimate off-site fly. I managed to download the program and install it, however I can't find a pr