I'm administrater whenever I have download something and you try to open it say parmiters not correct with the result that the average and especially if it worked yesterday how does this error occurs

Similar Questions

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Whenever I have download Firefox and then try to run it, I get a message "file corrupted".

  After downloading Firefox 6, I tried to run Firefox 6 on three different computers and whenever I get a message "the file is corrupt. I tried on different computers because I thought that maybe he had a problem with the computer on which I downloaded it, but I get the same result. What I am doing wrong?

  Later, try the suggestions in the 9, 10 and 11 in the following article first. If this does not work, look at the rest of the suggestion in the following article.

  • for the article, click here-> Impossible to save or download files (Mozillazine)

  See also: unable to download or save files (Firefox support)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Windows 7 - get this message when you try to open a file. Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  When I left click on the icon to open the file, I get the 17 ' error '. "  I right click on icon and select "run as Administrator'l and it will open, but lately it won't and the message above."

  Hi Bob,

  1. in open file are you get this error message?

  2. don't you make changes on the computer before this problem?

  This problem may occur if one of the following scenarios arises on your PC.

  • You do not have permissions for the file or the location of the file.
  • The file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer.
  • The file has been moved or deleted.
  • The shortcut or the file is corrupted.
  • The file may be blocked by Windows.
  • Your anti-virus software may block the file.

  Refer to the help article:

   

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk.

  Response with more information to help you.

• Microsoft and indexing of Site engine. How does this work on my computer?

  All this has been checked and re-checked and checked again with the old parts, new parts, the new computer and the laptop works fine wired or wireless.     Always the 'IE' hangs in place every 3 minutes on the desktop.    The Google Chrome still works fine...

  Also, when this check the wireless card was also changed twice, so is not a problem.    When the repair Tec border was here he checked also all this.    Once again, no idea...
  And yet, please go back and put in place with what I had to do well too long already.

  All this has been checked and re-checked and checked again with the old parts, new parts, the new computer and the laptop works fine wired or wireless. Always the 'IE' hangs in place every 3 minutes on the desktop...

  We can work on one 1 computer at a time here. You have me totally confused by referring to a "new" and a "laptop" as well as "connected" connections and "wireless".

  Please answer the following questions by number in your next reply (without quote my post):

  1. When you started this thread (and your other) October 21, have you display on your "new" or your "laptop"?

  2. is your "new computer" a desktop PC or a laptop?

  3 - is your "new computer" using a "wired" connection, "wireless" or both?

  4 is equivalent to the "new computer" as the "new replacement computer", you mentioned in your message yesterday?

• Security settings allow to download files when you try to open a file

  I am trying to download 2 files that someone sent me.  When I try to open a message and say my security settings only allow to download.  How to fix this?

  If you use Windows Live Mail, click on the drop-down list at the top left, click on Options and Security Options. Click the Security tab, and then uncheck "do not allow the opening or saving attachments that could contain a virus.

  If you use a different e-mail program, you should be able to find the equivalent settings.

• Cell.Contents not correctly resolve the empty strings if in excess... Is this a Bug or me?

  Greetings, Folks.

  It's driving me crazy. I can reproduce the problem over and over again. I'm missing a reason why cell.contents would be assessed differently in the case of condition in excess than no? I don't understand...

  Here is the scenario of. CS6, Win7, VB.Net (but the logic is simple so stay with me...).

  Object in question is a line of 3 cells with values in the respective cells: text, double value, double the value.

  Here's the problem. (gitc = 1 in all these test cases)

  If Not HasValue (curRow.Cells(gitc + 1). Content) then

  Here's the simple function called by the line above:

  Private Function HasValue (value as object( ) As Boolean

     If IsDBNull (value) OrElse value = "" Then Return Fake Else Return True

  End Function

  That is the problem. The code works as expected, provided that the referenced line is not in a State in excess, the object is a text value, and of two values, where the function returns an appropriate assessment. But if the line is in a State in excess, the object resolves in three empty strings ("" ") and as a result, the function returns the wrong assessment.

  Here the rub. If I lie down (or shorten) the column that puts a DIFFERENT line in the place in excess, the same result occurs to this different line, so I know that's not the values.

  Sorry for the long explanation, but I felt that it is important to give as much information as possible when you ask for help.

  Thank you very much for any help and/or an overview.

  TT

  Ah, I am a JavaScripter, but the Council is good even if the syntax is incorrect.

  The fact is that, if the cell is in excess and then its content is indeed empty. What is not empty is the subject of the text in the cell. You probably should look into it. In JavaScript is:

  myCell.texts [0] .silence

  Dave

• Location where Windows (xp) stores data has changed and needs to be repaired. How does this repair?

  I ran "fixitcenter.slupport.microsoft.com" and this is what they were saying was wrong. "  They automatically correct some defects, but has not fixed this problem - just tell me what was wrong and said it "must" be repaired.

  1 remove the data store and allow it to rebuild. First stop the Automatic Update Service Click Start. Choose run. In the run box, type services.msc. Click OK. Right-click the Automatic Updates Service. Click stop. Please rename the folder c:\Windows\SoftwareDistribution after stopping the Service Open the Windows Explorer Navigate to the Windows folder Click on the + next to the Windows folder Navigate to the folder C:\Windows\SoftwareDistribution Right-click on the folder C:\Windows\SoftwareDistribution Select Rename in the Menu Rename the SoftwareDistribution.old folder and click enter Now, restart the Automatic Update Service Click Start. Choose run. In the run box, type services.msc. Click OK. Right-click the Automatic Updates Service. Click Start. Starting the service will take a moment. Start Windows Update again UTC/GMT is 03:16 on Saturday, December 3, 2011

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  Then you need to either:

  (1) sign up for cloud creative then you can build a simple edition approx. attention however: this approach will no longer valid as of May 1, when we withdraw support for a unique creative cloud and unique edition apps are only on devices iPad.

  (2) sign up for a full license of DPS. You can request information on prices using Adobe | Request for consultation.

  Neil

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Whenever I have download a file, I get a message saying that the file is infected and the virus has been removed but I am unable to open the files.

  original title: problem downloading

  whenever I have download anything download is well over upto100% but the file or the software won't open or saved. It gives the message that this file contains viruses and has been deleted. Please help me find a solution thanks

  I use compaq notebook pesario CQ 60 with pentium dual core inside windows vista AVG anti virus security system

  Hi sirmalik,

  ·         Did you the latest changes on the computer before this problem?

  ·         The problem occurs with all the files?

  ·         From which site you try to download the file?

  ·         What web browser do you use?

  I suggest you follow these methods.

  Method 1: Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Try to create a new user account.

  Create a new user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, you can check the link on the way below difficulty a user profile is corrupted.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Whenever I have download an image with the command "save the image under...". ", it records in a useless file of 168 bits.

  As stated, whenever I have download an image with the command "save image under" he recorded in a useless file of 168 bits. This does not happen everytime I have save an image, but more often the not, and I don't have a lot of useless files hang out because of this. Is it possible to re - download each image 168 bits that he should have been downloaded in the first place? Is it possible to ensure that this does not happen?

  Here's what it looks like:
  http://i.imgur.com/yzgwwgC.gif?1

  This means that you are not allowed to do this action.
  The site could use a transparent overlay image to protect the actual image or otherwise has put in place a protection.
  You can check if see you the image in "tools > Page Info > Media ' and save it.

• Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image

  Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image for each photo, instead of actual miniatures of the photo itself.  I can't find the pictures I'm looking.  Why is this happening and how can I solve this problem?

  This parameter can be:

  (1) open Folder Options (search for your search box on the start menu to find)

  (2) on the display tab, verify that the "always show icons never thumbnails" is off (disabled)

• Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

  Original title: I can print from other programs such as Gimp, just not windows live photo

  When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Before troubleshooting, I have little information on the issue.

  1. what type of image file?

  2 are you facing this problem with specific program or all programs?

  3. did you of recent changes to the computer before this problem?

  4. What is the serial number and model of the printer?

  Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

  Method 1: Print a test page:

  http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

  Method 2: Why can I not print?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

  Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

  http://www.GIMP.org/webmasters.html

  Reference link:

  Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

  It will be useful.