I'm checking accessibility writable EEPROM and calibrated... is possible outside the laboratory?
I'm checking the EEPROM of nonvolatile calibration of the PXI-6115 controller card is accessible only by technicians of the calibration. It cannot be written to or altered in any way. The letter of volatility indicates she has 4 k x 8 bits of access read/write nonvolatile, limited API. Only 5 bytes are available. for user-defined (custom) data. Does this mean that the API and the 5 bytes are PW protected and cannot be customized by the technicians of Calibration or does that mean that they are available for anyone to write and record on the map?
I also try to check the information even for the PXI-5411 and PXI-4060 cards as well.
Hi JenW-
The 5 bytes of "user-defined information" are writable by anyone with access to the device through NOR-DAQmx. In LabVIEW, you can write (and read) these bytes via the calibration information property node. In the C interface, there is a corresponding attribute to write and read the same thing. The rest of the EEPROM content cannot be changed by the calibration software and not can be written or read directly through NOR-DAQmx.
I hope this helps.
Tags: NI Software
Similar Questions
-
Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)
Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.
Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.
-
MacBook Pro 13 '' end 2015. 256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start. The progress bar with the Apple Logo would be present but would end not showing the symbol «» I tried to boot mode safe - no go. I have not reset PRAM help. I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup. The utility show me backups however when I would go to the next screen and no backup is available. Disk utility displays the SSD. Can I erase the disc and download OS X install? Thank you.
At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.
You have already run disk first aid.
Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.
-
I've done this before and now can't for the life of understand me what the problem.
Any help will be greatly appreciated.Thank you
Mike-Mike-K5VSE USS Point Defiance, USS Okanogan, APA220 LSD31OK people, I started over and took the key to the second attempt.
Thanks for putting up with me this morning.
Mike in AR Mike-K5VSE USS Point Defiance, USS Okanogan, APA220 LSD31
-
Access denied - owner and/or setting permissions on the registry key
I'm on a Windows 7 Home Premium system that has been upgraded from Vista. Several weeks when you try to install Symantec Network Access Control, I came across problems where the facility would be restoring because of a registry access problem. Since then, I have read and tried many fixes. None have worked. My current problem is that VCRedist_x64.exe also fails to install with registry access denied. The steps I've tried among those in blog of Mark Michaelis. This includes their achievement, safe mode. I also have run the command secedit / configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose /areas REGKEYS. Still can not work around the error. The secedit journal includes some access denied errors for machine\software\microsoft. Not sure how they relate. I can find specify subkeys of the key / with Regedit who have the problem... but so far non of the suggestions to reset the ownership/permissions work.
In advance... I appreciate the new thoughts and ideas to this problem.
There must be a way to disable the security on the registry long enough to clean up this mess...You need to take ownership of the subkeys before you can change everything right of access!
-
May 2015, I bought a MacBook Pro in New York. I loved, but yestarday, April 2016, out of nowhere, the screen has decided to go all crazy. She has never fallen, or drowned or had any kind of accident. I live in Dominican Republic so I can't take it to an Apple store. The only thing I can do is bring to one of the Apple here distributors in the country. I want to just make sure that it will be in good hands and it will be fixed. They guy at the store iZone said it might be a manufacturing problem and that I still have my one year warranty we free repair. But still, it is safe to do in a store that is not exactly "Apple"?
The Apple store closest to me is about 150 miles. I use an authorized Apple dealer, and they make my warranty repairs. Never had a problem.
-
State protection of session and browsing to URLs outside the apex
Hello
I'm working an application, in which basis on a unique key for each customer, and I show you her address on map (google.api) I used the apex util to prepare the url and activate checksumprotection on that element for success.
I have another page that is the customer also details on this unique base, which works great as its peak in only
what I notice is that, when I browse to url (maps.google.com) external session is different from what I had originally, posing problem when I want to navigate from card (java script Info window) to access details by using the same unique key of the client.
I read that it was a bug in 4.1, but I use 4.1.1 assuming that the bug has been fixed.
DB 11G
Oc4j
Linux
Kindly helpHello Red Bull,
Following article will help you to google maps api integration through web services:
[url http://www.oracle.com/technetwork/developer-tools/apex/application-express/integration-086636.html#GOOGLE] Request Express integration with Google Maps
OR
You can try just of plugins available on http://apex-plugin.com.
One of them which can be your help is:[url http://apex-plugin.com/oracle-apex-plugins/item-plugin/location-map-image_97.html] View the location on a Google map
by @Peter Raganitsch including the blog post is:
http://www.Oracle-and-apex.com/plugin-location-map-image/
I hope that helps!
Kind regards
Kiran -
How to reset the Status field and delete ToDo list outside the user interface?
All, morning
HR 802 generating WebHelp.
I made use of the status field and ToDo List in the past. For my next release aid, I would like to reset these fields for all the subjects, so I can still have accurate reports as subjects of creation/revision of the final course.
Is it possible to do without opening each topic in the user interface and compensation/change manual fields? (I thought to delete all fields of ToDo and recreate them, but thought that there is an easier way.) This information appears in each section or in a separate file?
Thank you
Patrick
Hi Patrick
- Close all topics that can be opened in the editor.
- Open the pod of the list of topics.
- Select all subjects.
- Right-click and choose Properties from the subject.
- Click the status tab.
- Modify if needed.
All subjects should change to reflect the new status and the task list settings.
See you soon... Rick
Useful and practical links
Wish to RoboHelp form/Bug report form
Begin to learn RoboHelp HTML 7 or 8 days - $24.95!
-
Toolkit ECU Measurement and Calibration does not run when I build an executable.
I did a LabVIEW application that communicates with a target using CCP (with ECU Measurement and Calibration Toolkit).
The source code of LabVIEW works OK, but when I create a .exe file, it does not work.
I tried to copy the Toolkit ECU Measurement and Calibration dll:s in the same folder as the .exe file, but I still get error messages.
What should I do to get the run .exe file?
Do you have you created an "Installer" and installed on the laptop?
If yes have you selected this Toolkit (ECU Measurement and Calibration Toolkit) to add to the installer when creating the same thing?
Just try this approach once...
-
Before this version of Firefox 36.0.1, the < textarea > HTML worked in my forms. View Cart returns. In the version of 36.0.1 that they no longer work correctly. However, when I enter a carriage return, it displays a space instead of a line break. I went to test basic textarea
< textarea > name = cols 'comments' = 20 rows = 10 < / textarea >
to make sure that I was not introducing anything with other languages.
I use Windows Pro 8.1. I drove back to 35.0 Firefox and everything works fine. I installed 36.0.1 and it stops working.
I have access to another laptop also running the same version of windows and Firefox and it seems to be done as well strange things. I'm suspicious because I started to notice this immediately after a windows update last night. The laptop also known issues that he immediately after a windows update last night.
I still have another computer running a different version of windows and Firefox and it works very well. It seems that the issue is where there are windows Pro 8.1 and Firefox 36.0.1.
Guys do you have an idea what is happening here?
Thank you
JMRAUPE57The current version supports the white-space for a text box property and it is possible that the Web site uses spaces: pre instead of spaces: pre wrap.
The former will prevent Firefox of text wrapping.You can check that out in the Inspector via the context menu.
See:
The white-space property is currently working on HTML < textarea > (bug 82711) elements.
See also:
- [1050456/questions/1050456] Problems of film to 36.0
-
Original title: virus Possible?
I am running Windows Vista Home Premium on a Toshiba laptop. The last time I tried to stop it, it froze (got as far as the last screen showing 'close', then didn't). The next time I turned it on the desktop would not load completely (white screen, no desktop icons, accesses start bar) and if I click on the desktop I get a message saying "Windows Explorer is unresponsive. I tried to scan antivirus, but that also froze. I ran Microsoft defender several times, and it always freezes on C:\windows\system32\cmd.exe. While I can access internet Explorer, I can't click on the links that would open a new page (gel once more). Finally I can't yet do a reboot or a full stop. If it's a virus, how can I solve the problem when no anti-virus software is running?
Any help would be greatly appreciated! I just moved across the world and have little knowledge of computers (but I'm much less following the instructions!). The last thing I need is for my laptop to be drunk so I can't communicate with the House...
Hello
Since you have had that protection antivirus in the next message will be methods to
carefully check for malware.TrendMicro must be uninstalled and replaced<- this="" is="" a="" must="" do!="" if="" you="" have="">->
problems to check with TrendMicro.Instructions/TrendMicro removal tool
http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxHow can I uninstall my Trend Micro program removal tools fail?
http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspxList of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leave the file system, Web,.
Operational network (Script and behavior are also recommended in Ver 6 +).Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadOr use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.
http://www.Malwarebytes.org/products/malwarebytes_free=======================================
Do not type the sfcdetails command, copy and paste.
Many files that SFC cannot resolve are not important.
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
put the command from below (copy and paste) in this box and her and then press ENTER.
findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
who creates the sfcdetails.txt file in the folder that you are in when you run it.
So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)=================================================================
Did you do checks memory and updated the BIOS, chipset of low level drivers and major
embedded and separate device drivers?I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I wrote a short message to two of my employees, and I have attached a 2-page magazine article I scanned. The attachment was found to be 50MB in size. I don't know how it happened and I didn't notice it until I hit send. Never, the message is sent because I assume that the file size is too large. I tried for three days to remove my Outbox message, but I can't seem to remove it. Any suggestions on how I can get rid of it and start again? Thank you very much!
Just check to work offline , and then delete it from the Outbox.
-
I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?
original title: IPConfig and lack of internet accessGo to your computer manufacturer's support web site
and search for the Windows XP drivers for your specific computer or motherboard model number.If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
LAN, Audio, USB, SATA, etc, and so on.Note: If there is no XP driver listed, then your computer is not compatible Windows XP.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us========================= IpConfig ===========================
Open a command prompt window and type these two commands in the following
order:
(1) ipconfig/release
(2) ipconfig / renewJ W Stuart: http://www.pagestart.com
-
I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.
Hello
Please try the suggestions in the link below one by one and I'm sure that you will be able to solve the problem.
Kind regards
Vivek
-
I am a PC user and I have Adobe Creative Cloud Muse 2014. I received the "could not sign in you [access denied: 530]." Check your username and password "error. trying to download my muse to my ftp, GoDaddy host site I did it successfully in the past and that recently it has stopped working. I looked online at the Adobe Muse Help FAQ | Download a Site from Muse Adobe on a third-party hosting service and he said to download the ftpprefs.xml file but this file simply leads to a blank page that says / * not found * / / * not found * /.
Can you direct me to a page to work with this file, or provide an alternative? Thank you!
Hello
As you have found the error [access denied: 530] This means that the problem is with access. The user name and password that you enter is incorrect or you don't have the appropriate permissions.
I suggest you to contact Godaddy to reset the password or reset the permissions.
Concerning
Vivek
Maybe you are looking for
-
my iphone 5 c got stolen and I tried to find on find my iphone, but it continues to show that my iphone is offline... How can I find my phone?
-
I'm going to 10.11.14 and my mouse, the scroll feature
Upgrade to 10.11.14 and my mouse I stop scrolling features, a similar problem or know how to fix? now in settings, you cannot configure scroll.
-
When I try to post a new thread in any forum of shareaza at sourceforge.net, firefox 3.6.10 on xp + sp3 gives me "The page is not redirecting properly". Firefox has detected that the server redirects the request for this address in a way that will ne
-
I have tunes will not advance or shuffle on my I phone 5 s
I tunes will not advance or shuffle on my phone I 5s
-
(Redirected) Reference Dell 3442 speaker
Just bought my new laptop of Dell 3442 and having problems with the sound from the speaker. the voice is too small even if only I put it at nearly maximum level... need help for this kind of problem. Thank you