I'm having a problem on line when someone else uses the same router, error message: there is an IP address conflict

Similar Questions

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

  When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

  This storage folder are you referring? If you are referring to the film, what happens because you have accepted a trust between the iOS device and the computer. If the device has been connected to another computer, it must be unlocked and establish a relationship of trust as well. If you are referring to something different, please explain.

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• When I want to use the modem 711 error messages or 1068 appear

  Everything was going well on my new L series with windows 7. Then after a few months, I tried to connect to the modem to check my email. He won t connect.
  Fortunately, I still have my old computer, so I tried it worked. I googled Error 711 and as was suggested on other sites in windows. Nothing has worked.

  S so here is what I got: Error 711, go to services and change it to manual startup.
  He was already on manual start. Error 1068 same thing. What they said to do has already been done in management programs. So why doesn't it work?

  Modem is installed, I even tried uninstalling and reinstalling, but that made no difference. It of been a week now and nothing I will fix it. I only have the drive for laptop recovery, so it works with all that Toshiba put on it at the factory.

  I also tried the system restore, but when it restarts, I get the message of this system restore could not perform the full restore. Any additional programs are approved windows and works well. With the exception of iTunes that keeps telling me to change the compatibility mode that doesn't even go as far as windows7 and ivolume who won t recognize iTunes 9.0.2.

  Another problem I have is this iTunes update no longer far as 11,90 MB download before stalling in the process.

  Hello

  To be honest your ad is a bit confusing and not clear enough...

  I m not one expert with Modems but if errors occur even after using the Toshiba Recovery Disc I think that it s a hardware malfunction, and you should contact a service provider for help.

  If your recovery disk doesn't work, you can get a new from an authorized service or a new, you can order online but it s based on your laptop.
  Moreover, why you didn't post the information on your laptop?

  Sorry, but everything that s what I can say at the moment.

• Problem to process the payment.  Error message: there was a problem processing your order, please contact our Service team customer care for assistance. Indonesia: 001 803 447 361 Malaysia: 1 300 80 0027 Philippines: 180014410440 Thailand: 001 800 441 881

  Can help pl customer service!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• My bridge update 5.2.0.4 destroyed previews of all DNG files. They only appear on the side and small and I can't open Camera Raw in Bridge. Someone else has the same problem?

  I've updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5

  All previews (DNG files) to the bridge now appear on the side and only small miniature size.

  Also Camera Raw has been disabled.

  I tried cache purge for folders as all purge the cache.

  I also spent over an hour on the phone with technical support that being mainly involved switched between departments and try to understand someone on the phone.

  Can anyone help?

  I'm going to guess at the root of your problem is "also Camera Raw has been disabled."

  Can you check what version of Camera Raw, or not at all? Here is how to validate: keeping up to date of Photoshop

• fix for you receive a "Multiple controls with the same ID" error message when you dynamically add UserControls set caching for Web Forms

  where can I download this fix

  Follow the instructions in the article you cited.  Microsoft will provide you with a download link after following due process.  There is no charge for it.

• Maps work only not to the Organizer (Photoshop Elements 9) - someone else have the same problem?

  Can help you? Already uninstalled and reinstalled

  Hello

  I'm afraid that PES 9 used service of Yahoo to cards and arrested Yahoo mapping service is more worked so in PSE 9.

  PES 10 had even no mapping in it.

  In 11 of PES, the mapping is back, using Google maps.

  You would like to download the demo version of PES 11 to see if you like the mapping it.

  Brian

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• How many times can you install Lightroom 5? My problem is that I saved my programs on C. I have more space, I want to record my programs now on E. I can now uninstall Lightroom and reinstall from C to E? Can I use the same license as the first code

  Help, please!

  How many times can you install Lightroom 5? My problem is that I saved my programs on C. I have more space, I want to record my programs now on E. I can now uninstall Lightroom and reinstall from C to E? Can I use the same license as the first installation code?

  Use the same serial number. There is no problem to do that.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Problem with case when try to alter the query from siimple

  Hello PL/SQL gurus and Experts.
  
  I'm stuck with a question (can be simple), but not gettings all headsway.
  

  select 365/day_num_yr Anul_Fact from Date where date_dt = trunc(sysdate -1) 

  value returns is as - 1.46
  
  need to write it in the form of case (I have to multiply it to some other outer query), I want to store variable ina and then use the same in an outside -.
  but when use the following syntax, then it always returns 0 and not the same output returned by the query above without the scabbard.

  select (case when date_dt =trunc(sysdate -1) then 365/day_num_yr else 0 END) Anul_Fact 

  Help kindly, I appericate your time and effort in advance.

  user555994 wrote:
  Problem is that I do not get the output as 1.46, even the output is coming like the 0 only if using the query - next

  select /*date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,*/
  case when date_dt = trunc(sysdate -1) then  365/day_num_yr
  else 0
  end num_day
  from date_dim;
  

  Completely, which seems to be a question of DATA. Have you checked if the table contains data for DATE_DT = SYSDATE - 1? Can you check if the data stored do not have hours and Minutes stored?

  Although I have provided examples of data, which is the same as the data in my main table and once I used the previous solution you provided and then also gives the result as same as those mentioned by you.

  I think it's something like -

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
  case when date_dt = trunc(sysdate -1) then  366/day_num_yr where day_num_yr=(select day_num_yr from date_dim where date_dt = trunc(sysdate -1))
  else 0
  end num_day
  from date_dim;
  

  Once we get the day_num_yr then he deviding by 366/day_num_yr :(
  but he does not like throwing an error ORA-95 - missing keyword

  Yes, it does not work

  -case when date_dt = trunc (sysdate-1) then 366/day_num_yr where day_num_yr = (select day_num_yr from the date_dim where date_dt = trunc (sysdate-1))

  due to a syntax of alien.
  I don't think that you really need. I already said, with the data in your Table, you will be having only * 1 * record with a Non - zero value. Thus, simply apply a filter to extract the corresponding record SYSDATE - 1 and you should get an output which is Non-zero. If you apply a where predicate, then would not need you a CASE statement. You can directly use something like below:

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
         365 / day_num_yr num_day
    from t4
   where date_dt = trunc(sysdate - 1);
  

  Published by: Jen K, September 7, 2012 16:00