I'm having installation of a printing

Similar Questions

• Having difficulties to install printer Brother MFC-J470DW.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  Moved Windows 7 installation, set at level and activate Forum.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  It sounds like a problem to brother or one you won't easily resolved in a forum like this one and the first tip that you're going to get:

  Restoration of the machine to factory default (probably an OEM, not Microsoft, method) after the backup of your important data and collect your keys/serial installation media and product numbers.  Then install latest drivers from device hardware and all updates from Microsoft including the printer after you have restored to the factory settings (probably an OEM, not Microsoft, method) and then install all the other stuff.

  Why this review here?  If the people who made and take over the device (alone, you declare having questioned) could not fix things - and you gave NO DETAILS on what they had you try - you could lose your time here discussing the same things again without the expertise of those who intimately know their own device, wrote the software you are trying to install and tested on the operating system you try to install it on--or you could start from a State of CLEANLINESS and last KNOWN GOOD configuration and if it fails, then - be able to solve problems with those to the brother or simply return the product as a failure.

  Now - if you really think it sounds like a pain - provide details on what is and was not considered, etc..

  Other suggestions:

  If you use this:
  Full driver & software package
  ... as your starting point (this is for your device), we'll simplify and get the printer installed first.

  Simply download the driver (assuming that Windows 7 64-bit, another bit of information to provide):Printer Scanner Driver & driver for local connections

  ... chill out, go to the folder where you unzipped it so you can find the full path and...

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • Click on disk, and then navigate to the folder where the printer driver (see above).

  6. Perform the steps in the wizard and then click Finish.

  What he did add a printer to your printer list?  Can you print?

  In addition, in all their troubleshooting, they you save the driver Package & complete software and do a right click on it and run as administrator?

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Have you looked on the Lexmark web site for help? There is a firmware download here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=Z33_COLOR_JETPRINTER&segment=support&UserLocale=en_US&FromPage=null#1

  Are you sure that your printer is the default in the printer folder? You can print a test page?

• How to print a file without having to install any printer

  Hello!

  As I know, there was a possibility of printing to a file without having to install a printer and get a picture of your page to print somewhere as a service bureau or print Center. Please help how to get out if there is this possibility.

  Thanx

  There is a nice free program called PDFCreator which will allow you to do:
  http://www.pdfforge.org/PDFCreator>

  I used it since Windows 95 without any problem. It is very simple to install and use.

  SC Tom

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• An error 0 x 00000643 attachment with the installation of the printer

  I am running Windows Vista on a laptop and I am trying to install a wireless printer.  I get error 0 x 00000643.  I went to the windows support center and performed all workaround solutions that he suggested.  The WSD port has been deleted, but whenever I try to install the printer fails and returns the WSD port.  When the WSD port is removed, the installation fails without code.  I've had this installed printer so it worked before.  Any ideas?

  Hi Moyerhouse,

  Thank you for visiting Microsoft Answers.

  (a) don't you make changes on the computer before this problem?
  (b) who is the manufacturer of the printer?
   
  I first suggest you to run the tool to 'Fix' of Microsoft that automatically diagnoses and repairs printing problems, installation of a printer, connecting to a network printer and other related errors.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Let ' also install the latest drivers for the printer from the manufacturer's website and check if it helps.

  OR

  You can also uninstall the printer using the network browser and install it again. To do this, follow these steps:
  Open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  In the pane tasks, click view computers and devices.
  Locate the printer, and then right click on the printer to uninstall.
  Once the printer is uninstalled, connect the printer to the computer again. The Plug-and-Play service begins to install the printer.

  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• having uninstalled my hp printer, but have always had hp photosmart is not how to get rid of

  having uninstalled my hp printer, but have always had shortened photosmart hp with pictures how to uninstall

  Uninstall the photosmart program.

• HP8500 A909A, the installation program recognizes printer, but cannot connect

  HP8500 A909A, the installation program recognizes printer, but cannot connect

  Ok.

  It is installed by USB on the other printer?

  Did you share the printer?

  have you set up a virtual usb port?

  Have you tried to use the diagnosis of HP printer installation utility to help Setup and configuration of your printer?

  It would have been simpler to use the LAN connector so the other PC online would not be a condition for its availability.

  (1) connect the printer with the LAN connector to your network switch or router and turn it on.

  (2) make sure that the IP address of the printer is your network subnet via the embedded Web server or printer print Panel menu.

  (3) set it up as a network on all PCs compuuter to make it available for use

• installation of my printer

  I have an officejet6500e709n and cannot install it

  Please tell us the exact steps so that you have followed the instructions on the installation of the printer.

• Having trouble with the installation of the printer?

  Hi, I bought the Premium C410B photo all in one printer, but after trying so many times I can't still manage to install all the software for it. Fax does not work, the Hp Solution Center does not work. I even rebooted my system. I don't see the fax printer in the control Panel\Hardware and Sound\Printers page. I tried HP diagnostics as well, also downloaded latest software Web site. Still no luck.

  Help, please

  Thanks for the help I ended up by format the pc now it works.

• Problem with Windows update during the installation of the printer

  I tried several times to install an older printer to the Epson (Stylus Photo 925) on a computer running Windows XP Professional.  When I get to the part of the installation where I select the printer from a list in Windows this printer is not available, so I chose to Windows Update the list.  I've done several times, and the list of Epson printers is actually reduced after selecting the 'Windows Update' button.  Its unusual because a few weeks ago, I did the same configuration for a new machine of Windows 7 and Windows Update added this printer to the list.

  I should add that my printer is on a print server if the installation is a bit more detailed than just plugged in the USB cable and installation.

  If anyone can help with this question?

  Updates required driver from the download page of the device manufacturer or the computer, not Windows Update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• HP C7280 printer all-in-one: how to stop the software installation on C7280 printer, running for 6 hours

  I completed the installation of the C7280 all in software and it got to the configuration of the printer.  I used the wizard on the printer wireless to locate the wireless on the laptop, but when I tried to search for the printer on the laptop he couldn't find it.  Tried to save because it wouldn't let me move forward on the configuration and it inadvertenly started installation, but this time it will not stop install (6hrs) how can I stop installation and save my previous install

  Thanks for the reply, I have already done 4 uninstall yesterday 7z file level and renamed the file 7z in what has been shown as lacking in the original installation failed.  I was trying to see if I could save the first successful installation after all of the problems.  So, yesterday I did basically what you said and the software is installed and this time the printer has been detected and it works fine now.  Thank you

• X 2 Pro 512 G1/Officejet 6310: Installation of HP printer on Windows 10

  I can't get my printer to install Bluetooth on windows 10. With Bluetooth kit on windows settings, I've added, and all seems OK in Device Manager.

  The printer is correctly installed to work and connect usb cable. It's just the bluetooth option does not work.

  By bluetooth, it is paired and connected ok, and the name of the printer appears fine under bluetooth devices in device (which are all installed correctly) Manager. Curiously, it is called "printer, scanner, copier" in the printer folder devices nd, rather than by his real name, or name of the product.

  In the wondows 10 settings bluetooth settings it says driver is uavailable, and the printer is missing from the list of printers when you print from applications.

  I tried update the driver of the printer (the device, other devices Manager) but says windows can not find the drivers. (in the Device Manager it shows drivers installed and does not any errors).

  I removed and added the printer, but this has not solved the problem. I don't know what to try next.

  I have now solved this.

  I removed the printer in the printer list. I then used "add a printer" settings / bluetooth/printers add it to begin process again. When he could not find my printer, I clicked on "not in list" which meant that I could choose how I could set up the printer 'manually' - the last option on the screen. It asked what port I wanted to use. I chose the bluetooth/virtual port. It was the whole secret on how to install. Then, everything went well and the printer now works over bluetooth.

  I hope this can help others with the same question because it took a lot of time try all other options before discovering this necessary port first setting - IE. the road to the manual installation.