I'm having problems after the restart with docking station, applications, etc.

Similar Questions

• File deleted on esxi system after the restart with the last patch (256968)

  Hello

  Since I installed latest patch on esxi (build 256968), every time that I reboot server esxi, I lost the files in / opt and the .ssh folder.

  Before this patch, the files were still there on reboot.

  Do you have any idea what's going on? Is this a new limitation of free esxi?

  I ' am, using this file to VM backup with ghettovcb and everything works fine (until I reload )

  Thank you.

  This is provided with ESXi, there is difficulty set of files, including any of the local VMFS volumes that are kept at the restart. There is a cronjob schedule that works for the configuration files important backup automatically at a local bootbank, which is then loaded after the next reboot, all files created by the user and most likely using the Busybox does not support console will not survive a restart by default.

  If you use the ghettoVCB.sh - Free alternative for backup of VMS to ESX (i) 3.5, 4.x & 5.x , recommendation would be to store the script and all relevant files is the local VMFS volume or on the shared storage (NFS, iSCSI/FC SAN) volume.

  There is a script in "/sbin/auto-backup.sh" that you can actually run to see what files are being backed up, you can easily modify this script to save additional files which will ensure that they are saved on a restart.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Tecra 9100: Installation of the printer with docking station connected

  I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.

  This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.

  Also, if I unplugged the printer from the docking station and later taking again on another USB port,
  He will ask reinstall me the printer again.

  Thanks for any comments from anyone.

  I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.

  It seems to be normal. :)

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• External keyboard works only after the restart with Port Replicator III Plus

  The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

  This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

  Hello

  It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?

• Having problems capturing the image with 2 cameras and the PCIe-1430

  I have problems of switching between my two cameras and breaking or capture images in Labview or MAX. I can switch between cameras and capture images very well so that in the Vision Development Module, but not in Labview or MAX. However, it does not work the first time I have capture an image of a port, but not after that.

  This the error I get LabVIEW:

  1074397150 error occurred at Snap.vi IMAQ

  Possible reasons:

  NOR-IMAQ: A timeout error has occurred while you wait for it
  specified event.  If you expect a picture, check that all the videos
  data are acquired during the period.  If waiting for a
  signal, check that the assertion of signal occurs within the time limit
  period.

  This error I get from MAX:

  The IMAQ error

  Error 0xBFF60022

  A timeout error occurred while you wait for the specified event.
  If you expect a picture, make sure all video data is acquired
  during the period. If you wait for a signal, check that the
  affirmation of signal occurs within the time limit.

  The following list is what I currently use:

  1 card PCIe-1430

  2 cameras JAI Pulnix CM-140MCL

  LabVIEW 9000 f3

  Vision Assistant build 20090611041452

  MAX 4.6

  NEITHER Vision 9.0

  IMAQ 4.3

  
  

• 6.2 Lightroom on Mac 10.9.5 continues to be buggy.  Other people still having problems after the update or just me?

  I can't even use it.  Freezing and slow transformation and custom leave properly.  Its unusable.  I've updated to work with the new a7rII of Sony Pictures, but I can't tell if these images are the cause of the problem, or if his stroller just for everyone.  Help!

  Hi canepari,.

  There are also other property of the user, who are facing some problems.

  So I suggest you to please go back to the version of Lightroom 6.1.1

  Please take a look at the article: Instructions to restore an earlier version of update

  Kind regards

  Tanuj

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• After the recovery with CD Satellite C660-1FE keyboard does NOT work

  Hello

  A month ago I bought a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and I replaced the broken HD. I did a recovery of my HD image, so I had to order the recovery disks of the product on the Toshiba site (3 disks, which drive 1 and 3 were the only required for installation).

  Now I have the problem that my laptop keyboard doesn't work. I am currently using a USB keyboard and a mouse to replace my keyboard and the touchpad of the notebook.

  The keyboard of the laptop works fine in the BIOS. Therefore, I hope that it's just a driver issue.

  I have:

  tried to find and install a lot of pilots since the toshiba site, no results.
  tried to change settings in the bios (usb enabled).
  tried to fix the problem by reinstalling all of the computer repeatedly.

  The keyboard seems to work until windows loads. When the system is switched on I can press caps lock and num lock and the green lights will turn on. All this stops working once windows starts is displayed.

  Perhaps another problem in Device Manager: under the graphics card, 2 subcategories have exclamation points: it says Mobile Intel (r) 4 series express chipset family twice! I can't seem to fix these with the drivers I can find either. When I check the settings I have this message (google translate since it is in Dutch):

  + Digital signature for the drivers for this device is necessary, cannot be verified. Possible after a recent hardware or software change a file that is installed signed incorrectly or damaged, or malicious software is installed from an unknown source. (Code 52) +.

  + You must restart the computer for this change to take effect. + (obviously I've tried that too)

  Can someone give me it please help? I'm at the end of my intelligence.

  Sincerely,

  Daniel

  Hello

  Keyboard works in the BIOS, it means that the keyboard material should be ok and the connection between the keyboard and the motherboard is established.

  So, what could be bad? Keyboard driver?
  Hmm, the keyboard driver is part of the Windows operating system and is installed automatically during the installation of the OS
  I would recommend following:
  Go to Device Manager and remove the keyboard point.
  You should see something like PS/2 standard keyboard
  If you see a red x next to this unit, then it means that the keyboard is disabled.
  Usually, you should be able to activate this again (in Device Manager).
  If there is no Red Cross, so I you would recommend the deletion of this keyboard in the Manager list of devices, then reboot the laptop. Usually, the operating system should recognize the device automatically deleted and should install the driver too.

  Select this check box.

  By the way: it is possible that you received a recovery disk wrong which could explain the problems after the recovery procedure

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• VIB not updated after the restart - ESX6

  Hello

  I have a strange problem while updating to ESXi600-201511401-BG on 1 of 3 guests. It seems that the fix is installed correctly, but it disappears on the next reboot.

  
  

  The commands I tried to help include, but none of them seems to work:

  esxcli software update /vmfs/volumes/path/Update/ESXi600-201511001.zip esx-base - d - n vib

  and

  Profile of esxcli update d software /vmfs/volumes/path/Update /ESXi600 - 201511001.zip - p ESXi - 6.0.0 - 20151104001-standard

  The result is:

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 1.22.3247720

  VIBs removed: VMware_bootbank_esx - base_6.0.0 - 1.20.3073146

  VIB list after installation check seems to be updated, but after the restart, he returned to the old version.

  All guests were built fresh at about the same time using the same media however, this server has a problem. By comparing each server the only difference in VIBs is VMware_bootbank_esx-base. Everything else is the same...

  Any help would be appreciated.

  Thank you

  Derek

  VMware technical support identified the error "MSI - X not supported by the device" in boot.gz and recommended to update firmware or try to reinstall. As the host was running the same firmware as the hosts who have been updated and not happy with the way recommended reconstruction of the host, I did some research in error.

  A bit of googling suggests that the error relates to USB interrupts, which lead me to realize that it was the only server currently connected to a 16 ATEN KVM (cables VGA/USB) port. After unplugging the KVM, I was able to apply successfully the update...

  If anyone else has this problem and has devices connected to USB ports, I would disconnect them and try the upgrade again.

• Having problems downloading/getting started with Photoshop

  Just bought the membership. Having problems download/getting started with Photoshop. Try once then maybe interfering. When I go into Photoshop, it says it has expired! Don't see how I can remedy this.

  Hello Sharon,

  In addition you can also consult the help below document:

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305